[Starlingx-discuss] port-security

Jones, Bruce E bruce.e.jones at intel.com
Mon Apr 1 17:08:49 UTC 2019


Volker, please follow the process Curtis mentioned below and submit a StoryBoard Story.  Then I’d suggest you send the story link out to the mailing list and ask the Networking sub-project to work with you to fill in any additional details needed.

Meanwhile Curtis can you add this to the ethercalc as an item for the next release?

     brucej

From: Curtis [mailto:serverascode at gmail.com]
Sent: Monday, April 1, 2019 10:00 AM
To: von Hoesslin, Volker <Volker.Hoesslin at swsn.de>
Cc: starlingx-discuss at lists.starlingx.io
Subject: Re: [Starlingx-discuss] port-security

On Mon, Apr 1, 2019 at 10:40 AM von Hoesslin, Volker <Volker.Hoesslin at swsn.de<mailto:Volker.Hoesslin at swsn.de>> wrote:
Ok, this is an very intressting point! I would prefere to add port-security maybe an system switch to change this behavior in runtime (of cource, it need an re-provisining).

I should know this better, but I believe if you'd like to request a feature you could go through this process:

https://wiki.openstack.org/wiki/StarlingX/Feature_Development_Process

If that's not the process we're following for the project hopefully someone on the list will correct me.

Once it's there it could be discussed. :)


Is there an releation with my other problem? One Instance with multiple Networks and for every Network an floating IP -> only one floating IP is working all other are without any response? Also port-forwarding in the router are broken and do not word …


Is there any chance it's just a routing problem? ie. reply packets for the non-working interfaces are going out the working interface b/c it has the single default gw? Something like that?

Thanks,
Curtis


Von: Curtis [mailto:serverascode at gmail.com<mailto:serverascode at gmail.com>]
Gesendet: Freitag, 29. März 2019 19:44
An: von Hoesslin, Volker
Cc: starlingx-discuss at lists.starlingx.io<mailto:starlingx-discuss at lists.starlingx.io>
Betreff: Re: [Starlingx-discuss] pre-stable version bevor next release?

On Fri, Mar 29, 2019 at 10:55 AM von Hoesslin, Volker <Volker.Hoesslin at swsn.de<mailto:Volker.Hoesslin at swsn.de>> wrote:
Hi anybody,
i realy love this project but I have some reason to deploy now an working stack. Is there currently an working version or have to wait until new release date? The current stable version isn’t working in all details for me, look at discuss “Unrecognized attribute(s) 'port_security_enabled'”.


With regards to port security, I tried to write this email a couple times, it's tough b/c I don't know the history, but here are my thoughts:

- Security groups are effectively disabled in stx (noop driver), at least in my deployment from an ISO from last week
- This is probably for performance reasons, ie. iptables, but I'm not sure of the history
- Maybe it's time to revisit security groups? eg. k8s is there and uses iptables, or maybe openflow based driver would be an option...or other?
- Likely we (the project) just need to make sure it gets properly documented, if it's not already

Maybe some others with more history will chip in. :)

Thanks,
Curtis



Thx,
Volker…
_______________________________________________
Starlingx-discuss mailing list
Starlingx-discuss at lists.starlingx.io<mailto:Starlingx-discuss at lists.starlingx.io>
http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss


--
Blog: serverascode.com<http://serverascode.com>


--
Blog: serverascode.com<http://serverascode.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20190401/21e39a10/attachment-0001.html>


More information about the Starlingx-discuss mailing list