[Starlingx-discuss] EXT-fs error when deploying staringx on bearmetal server

Fri Feb 15 10:32:07 UTC 2019

Hi Yong and Cindy,
I had deployed successfully Simplex All-in-one on bear metal , the root cause is error RAID  configuration and caused incompatible hard disks.
Thanks

BR
Tim Xiong

From: xiongzhiwei at baicells.com
Date: 2019-02-02 15:33
To: Hu, Yong; Xie, Cindy; starlingx-discuss
Subject: Re: Re: [Starlingx-discuss] EXT-fs error when deploying staringx on bearmetal server
Hi Yong,
puppet.log attached.

Thanks

From: Hu, Yong
Date: 2019-02-02 15:10
To: xiongzhiwei at baicells.com; Xie, Cindy; starlingx-discuss
Subject: Re: [Starlingx-discuss] EXT-fs error when deploying staringx on bearmetal server
Pls share us your /var/log/puppet/latest/puppet.log.

From: "xiongzhiwei at baicells.com" <xiongzhiwei at baicells.com>
Date: Saturday, 2 February 2019 at 3:07 PM
To: "xiongzhiwei at baicells.com" <xiongzhiwei at baicells.com>, "Hu, Yong" <yong.hu at intel.com>, "Xie, Cindy" <cindy.xie at intel.com>, starlingx-discuss <starlingx-discuss at lists.starlingx.io>
Subject: Re: Re: [Starlingx-discuss] EXT-fs error when deploying staringx on bearmetal server

Hi Yong and Cindy,
The same error appeared after removed these two sata disks.

Thanks
Tim

From: xiongzhiwei at baicells.com
Date: 2019-02-02 14:34
To: Hu, Yong; Xie, Cindy; starlingx-discuss
Subject: Re: [Starlingx-discuss] EXT-fs error when deploying staringx on bearmetal server
Thanks Hu Yong and Cindy, I am trying to again after remove these two SATA HD.
Will tell you once successed.

Regards
Tim

From: Hu, Yong
Date: 2019-02-02 14:27
To: xiongzhiwei at baicells.com; Xie, Cindy; starlingx-discuss
Subject: Re: [Starlingx-discuss] EXT-fs error when deploying staringx on bearmetal server
If using 240G SATA HD as the boot disk, the storage might not be enough.

At least, in our virtual environment, the boot disk has to be larger than 250 GB.

From: "xiongzhiwei at baicells.com" <xiongzhiwei at baicells.com>
Date: Saturday, 2 February 2019 at 2:17 PM
To: "Xie, Cindy" <cindy.xie at intel.com>, starlingx-discuss <starlingx-discuss at lists.starlingx.io>
Subject: Re: [Starlingx-discuss] EXT-fs error when deploying staringx on bearmetal server

Hi Cindy,
This image was build by myself, fetched on 24th Jan.
It is working normally in my VM enviroment but failed on the bear metal server.
My server is Huawei RH2288v3: E5-2630 v3 at 2.4GHz, 2*8cores, 16*8G DDR4 RAM, 2*900G SAS+2*240G SATA HD.

Thanks
Tim Xiong

From: Xie, Cindy
Date: 2019-02-02 13:00
To: xiongzhiwei at baicells.com; starlingx-discuss
Subject: RE: [Starlingx-discuss] EXT-fs error when deploying staringx on bearmetal server
HI, Tim,
Can you please provide the following info:
-          Exact version of the StarlingX: if you downloaded it from Cengen, please provide the link; if you built it by yourself, please provide the date on master.
-          Your HW config for your bare metal server. Our recommended HW config can be found here: https://docs.starlingx.io/installation_guide/index.html

Thanks. - cindy

From: xiongzhiwei at baicells.com [mailto:xiongzhiwei at baicells.com] 
Sent: Saturday, February 2, 2019 12:38 PM
To: starlingx-discuss <starlingx-discuss at lists.starlingx.io>
Subject: [Starlingx-discuss] EXT-fs error when deploying staringx on bearmetal server

Hi,
I am trying to deploy starlingx on a bearmetal server, but failed, 
After execute "sudo config_controller" and some default configuration confirmed(all-in-one, simplex),  exception printed as below:

01/08: Creating bootstrap configuration ... DONE
02/08: Applying bootstrap manifest ... [  452.567312] EXT4-fs error (device drbd1): ext4_journal_check_start:56: Detected aborted journal
[  452.576753] EXT4-fs (drbd1): Remounting filesystem read-only
[  466.880792] EXT4-fs error (device drbd3): ext4_journal_check_start:56: Detected aborted journal
[  466.886032] EXT4-fs (drbd3): Remounting filesystem read-only
[  479.755269] EXT4-fs error (device drbd0): ext4_journal_check_start:56: Detected aborted journal
[  479.760818] EXT4-fs (drbd0): Remounting filesystem read-only
[  479.766425] EXT4-fs (drbd0): ext4_writepages: jbd2_start: 13312 pages, ino 28; err -30
Failed to execute bootstrap manifest

Configuration failed: failed to apply bootstrap manifest. See /var/log/puppet/latest/puppet.log for details.

I had deployed successfully on a qemu VM with same image, also all-in-one and simplex.
Is there any configurations missed for the bear metal server? I had recovered all BIOS configurations to default for it.
Could anyone help me to fix it?
Thanks

BR
Tim Xiong

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20190215/bf847dbf/attachment-0001.html>