[Starlingx-discuss] Starlingx network requirement

Quick Convey quickconvey at gmail.com
Thu Jan 17 07:54:46 UTC 2019


Thanks Matt peters,

Compute nodes communicate via this Data interface, right ?
*VMs* in different compute nodes also use this data interface for
communication, right ? (communication between VM in CP1 -to- VM in CP2)
*OVS* also use this data interface to make tunnel between the compute
nodes, right ?

You have mentioned that application requirements decide the required number
of ports and network topology. Applications will be running in the VM and
doesn't aware about the physical topology, right ? Could you please explain
it.

Thanks,


On Mon, Jan 14, 2019 at 10:50 PM Peters, Matt <Matt.Peters at windriver.com>
wrote:

> See inline.
>
>
>
> *From: *Quick Convey <quickconvey at gmail.com>
> *Date: *Monday, January 14, 2019 at 3:56 AM
> *To: *"starlingx-discuss at lists.starlingx.io" <
> starlingx-discuss at lists.starlingx.io>
> *Subject: *[Starlingx-discuss] Starlingx network requirement
>
>
>
> Dear All,
>
>
>
> I am planing to setup Starlingx in bare-metal (controller-storage
> deployment)
>
>
> https://docs.starlingx.io/installation_guide/controller_storage.html#controller-storage
>
>
>
> I have couple of questions
>
>
>
> *Q1)* What is the network requirements for this setup. All nodes should
> be in same network, that is the only requirement, right ?
>
> The Management network is on all hosts and also serves as the PXEBoot
> network for booting other hosts from the Controller hosts.
>
> The OAM network is required for controller hosts only.
>
> The Data network is required for compute hosts only.
>
>
>
> *Q2)* In "Hardware Requirements" section, I seen *"Data: n x 10GE
> Compute"*, what that means, is it number of physical interfaces needed
> for data ? what that* "n" *indicate ? is it number of compute nodes ?
>
> The ‘n’ indicates you can have more than 1 port if required for your
> application deployment.  The data networks are not used by the platform, so
> it is up to the application requirements to decide the required number of
> ports and network topology.
>
>
>
> *Q3) *What is the number of physical interfaces needed in controller and
> compute bare-metal nodes ?. From the document I understand that only 2
> physical interfaces are enough, right ?
>
> Controller: 1 Mgmt, 1 OAM
>
> Compute: 1 Mgmt, N Data (where N>=1)
>
>
>
> *Q4) *Is there any picture which shows *Management*, *OAM* and *Data*
> interface connections between controller and compute nodes ?
>
> I don’t think there is a StarlingX document that shows the interconnection.
>
>
>
> *Thanks,*
>
>
>
>
>
>
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20190117/bbb02908/attachment.html>


More information about the Starlingx-discuss mailing list