[Starlingx-discuss] ansible deployment for duplex/standard

Ngo, Tee Tee.Ngo at windriver.com
Sun May 26 23:25:09 UTC 2019


Hi Yan,

The instructions are on the Standard installation wiki. Please include your config settings in the LP (i.e. content of your localhost.yml). The one in the original email below does not specify a private registry. I will assist you with this issue. Let's set up a zoom session.

Tee

From: Chen, Yan [mailto:yan.chen at intel.com]
Sent: May-24-19 1:40 AM
To: Chen, Yan; Poncea, Ovidiu; starlingx-discuss at lists.starlingx.io
Subject: Re: [Starlingx-discuss] ansible deployment for duplex/standard

I tried to config oam/mgmt. for duplex/standard after ansible, and the controller1 and other nodes can be installed now.

But we still met issue when doing "system application-upload" because we have to use private registry in SH, but private registry is not successfully configed by ansible, please check this LP:
https://bugs.launchpad.net/starlingx/+bug/1830319

Thanks!

Yan

From: Chen, Yan [mailto:yan.chen at intel.com]
Sent: Friday, May 24, 2019 10:32
To: Poncea, Ovidiu <Ovidiu.Poncea at windriver.com>; starlingx-discuss at lists.starlingx.io
Subject: Re: [Starlingx-discuss] ansible deployment for duplex/standard

Thanks!
I will try.


Yan

From: Poncea, Ovidiu [mailto:Ovidiu.Poncea at windriver.com]
Sent: Thursday, May 23, 2019 18:21
To: Chen, Yan <yan.chen at intel.com<mailto:yan.chen at intel.com>>; starlingx-discuss at lists.starlingx.io<mailto:starlingx-discuss at lists.starlingx.io>
Subject: RE: ansible deployment for duplex/standard

On controller-0 you need to delete the loopback interface and then configure the other nets on ctrl-0 with something like:

system host-if-modify controller-0 lo -c none
system host-if-modify controller-0 enp0s3 -c platform --networks oam
system host-if-modify controller-0 enp0s8 -c platform --networks mgmt
system host-if-modify controller-0 enp0s8 -c platform --networks cluster-host
system host-addr-list controller-0

The rest of the process is identical on the other nodes.

Ovidiu
________________________________
From: Chen, Yan [yan.chen at intel.com]
Sent: Wednesday, May 22, 2019 10:12 AM
To: starlingx-discuss at lists.starlingx.io<mailto:starlingx-discuss at lists.starlingx.io>
Subject: [Starlingx-discuss] ansible deployment for duplex/standard
Hi

I wonder if anyone can help me on the ansible deployment for duplex/standard.

I installed ISO (about 0519) on vms and run ansible with my yml file as below, but the 2nd controller failed to be installed via pxe.
After checked controller0, I found that mgmt network is configured to lo.
But use "config_controller --force" everything's ok.

Am I doing anything wrong with the yml file?
There's no instruction on WIKI for duplex + ansible yet. (?)

---
system_mode: duplex

management_subnet: 192.178.204.0/28

external_oam_subnet: 10.10.10.0/24
external_oam_gateway_address: 10.10.10.1
external_oam_floating_address: 10.10.10.2
external_oam_node_0_address: 10.10.10.3
external_oam_node_1_address: 10.10.10.4




Yan

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20190526/2303cdae/attachment-0001.html>


More information about the Starlingx-discuss mailing list