[Starlingx-discuss] Error while installing simplex virtual AIO-SX

Babu R babu.r at hotmail.com
Thu Apr 15 23:52:48 UTC 2021


Thanks for the help, I'm able to select all in one controller, with this the installation is successful.
________________________________
From: Penney, Don <Don.Penney at windriver.com>
Sent: Thursday, April 15, 2021 10:53:00 PM
To: Babu R <babu.r at hotmail.com>; Sullivan, David <David.Sullivan at windriver.com>; starlingx-discuss at lists.starlingx.io <starlingx-discuss at lists.starlingx.io>
Subject: RE: [Starlingx-discuss] Error while installing simplex virtual AIO-SX


If you’re booting from the ISO, you should see a menu like the following when you first boot:



         lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk

          x         Select kernel options and boot kernel          x

          tqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqu

          x Standard Controller Configuration                    > x

          x                                                        x

          x All-in-one Controller Configuration                  > x

          x                                                        x

          x All-in-one (lowlatency) Controller Configuration     > x

          x                                                        x

          x                                                        x

          x                                                        x

          x                                                        x

          x                                                        x

          x                                                        x

          x                                                        x

          mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj



  Press [Tab] to edit, [Return] to select, [ESC] to return to previous menu





Here is where you’d select the AIO option.



From: Babu R <babu.r at hotmail.com>
Sent: Thursday, April 15, 2021 1:07 PM
To: Sullivan, David <David.Sullivan at windriver.com>; Penney, Don <Don.Penney at windriver.com>; starlingx-discuss at lists.starlingx.io
Subject: RE: [Starlingx-discuss] Error while installing simplex virtual AIO-SX



[Please note: This e-mail is from an EXTERNAL e-mail address]

Thanks for the pointer, when I try to install the host there is no option to select All-in-one Controller:



Starting installer, one moment...

anaconda 21.48.22.147-1 for CentOS 7 started.

* installation log files are stored in /tmp during the installation

* shell is available on TTY2

* when reporting a bug add logs from /tmp as separate text/plain attachments

16:50:25 Running pre-installation scripts

16:50:29 Not asking for VNC because of an automated install

16:50:29 Not asking for VNC because we don't have a network

Starting automated install.............



Is there a way to control it  by some other means? Please let me know



Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10



________________________________

From: Sullivan, David <David.Sullivan at windriver.com<mailto:David.Sullivan at windriver.com>>
Sent: Thursday, April 15, 2021 10:17:50 PM
To: Penney, Don <Don.Penney at windriver.com<mailto:Don.Penney at windriver.com>>; Babu R <babu.r at hotmail.com<mailto:babu.r at hotmail.com>>; starlingx-discuss at lists.starlingx.io<mailto:starlingx-discuss at lists.starlingx.io> <starlingx-discuss at lists.starlingx.io<mailto:starlingx-discuss at lists.starlingx.io>>
Subject: RE: [Starlingx-discuss] Error while installing simplex virtual AIO-SX



The system type is standard. Only duplex is supported with a standard install. If you want a simplex install you’ll need to reinstall the host and specify ‘All-in-one Controller Configuration’ in the boot menu.



From: Penney, Don <Don.Penney at windriver.com<mailto:Don.Penney at windriver.com>>
Sent: Thursday, April 15, 2021 10:58 AM
To: Babu R <babu.r at hotmail.com<mailto:babu.r at hotmail.com>>; starlingx-discuss at lists.starlingx.io<mailto:starlingx-discuss at lists.starlingx.io>
Subject: Re: [Starlingx-discuss] Error while installing simplex virtual AIO-SX



The default “system_mode” value is “simplex”, as far as I know, so I think the only way it would get set to duplex is if that was set in the localhost.yml used. I would double check the file on your system and the ansible.log to ensure you don’t have it set twice, maybe, or inadvertently used the wrong localhost.yml file.





From: Babu R <babu.r at hotmail.com<mailto:babu.r at hotmail.com>>
Sent: Thursday, April 15, 2021 10:51 AM
To: Penney, Don <Don.Penney at windriver.com<mailto:Don.Penney at windriver.com>>; starlingx-discuss at lists.starlingx.io<mailto:starlingx-discuss at lists.starlingx.io>
Subject: RE: Error while installing simplex virtual AIO-SX



[Please note: This e-mail is from an EXTERNAL e-mail address]



This is the value in localhost.yaml:



system_mode: simplex

distributed_cloud_role: none

timezone: UTC



dns_servers:

- 8.8.8.8

- 8.8.4.4



external_oam_subnet: 10.10.10.0/24

external_oam_gateway_address: 10.10.10.1

external_oam_floating_address: 10.10.10.2





[sysadmin at controller-0 ~(keystone_admin)]$ system show

+----------------------+--------------------------------------+

| Property             | Value                                |

+----------------------+--------------------------------------+

| contact              | None                                 |

| created_at           | 2021-04-15T09:17:31.777303+00:00     |

| description          | None                                 |

| https_enabled        | False                                |

| location             | None                                 |

| name                 | 11cd7071-1a70-4925-b5ba-721bcd51028e |

| region_name          | RegionOne                            |

| sdn_enabled          | False                                |

| security_feature     | spectre_meltdown_v1                  |

| service_project_name | services                             |

| software_version     | 20.06                                |

| system_mode          | duplex                               |

| system_type          | Standard                             |

| timezone             | UTC                                  |

| updated_at           | 2021-04-15T09:19:53.507043+00:00     |

| uuid                 | 371ea48f-df33-4251-9908-6b3646300ec2 |

| vswitch_type         | none                                 |

+----------------------+--------------------------------------+

[sysadmin at controller-0 ~(keystone_admin)]$



I see that the system mode is set to duplex



From: Penney, Don<mailto:Don.Penney at windriver.com>
Sent: 15 April 2021 20:17
To: Babu R<mailto:babu.r at hotmail.com>; starlingx-discuss at lists.starlingx.io<mailto:starlingx-discuss at lists.starlingx.io>
Subject: RE: Error while installing simplex virtual AIO-SX



Please double-check your localhost.yml that you haven’t set “system_mode: duplex”. I don’t think you should see this error message on simplex.



Please do “system show”



From: Babu R <babu.r at hotmail.com<mailto:babu.r at hotmail.com>>
Sent: Thursday, April 15, 2021 10:37 AM
To: Penney, Don <Don.Penney at windriver.com<mailto:Don.Penney at windriver.com>>; starlingx-discuss at lists.starlingx.io<mailto:starlingx-discuss at lists.starlingx.io>
Subject: RE: Error while installing simplex virtual AIO-SX



[Please note: This e-mail is from an EXTERNAL e-mail address]



ler-0dmin at controller-0 ~(keystone_admin)]$ system interface-network-list control

+--------------+--------------------------------------+--------+--------------+

| hostname     | uuid                                 | ifname | network_name |

+--------------+--------------------------------------+--------+--------------+

| controller-0 | 2ea52872-593a-438e-a560-b314e0726fb4 | enp2s1 | oam          |

| controller-0 | 82313dc8-7ce5-4d7f-ae92-b123580b0295 | lo     | cluster-host |

| controller-0 | e190565d-12c6-4f11-9277-2aef932c6b2c | lo     | mgmt         |

+--------------+--------------------------------------+--------+--------------+







+--------------+--------------------------------------+

| Property     | Value                                |

+--------------+--------------------------------------+

| hostname     | controller-0                         |

| uuid         | e190565d-12c6-4f11-9277-2aef932c6b2c |

| ifname       | lo                                   |

| network_name | mgmt                                 |

+--------------+--------------------------------------+

[sysadmin at controller-0 ~(keystone_admin)]$



Please find the mgmt. Interface config. As described in the document it is attached to loopback interface only



From: Penney, Don<mailto:Don.Penney at windriver.com>
Sent: 15 April 2021 18:52
To: Babu R<mailto:babu.r at hotmail.com>; starlingx-discuss at lists.starlingx.io<mailto:starlingx-discuss at lists.starlingx.io>
Subject: RE: Error while installing simplex virtual AIO-SX



Your error is referring to the management interface, but you’ve included your oam interface config for reference.





From: Babu R <babu.r at hotmail.com<mailto:babu.r at hotmail.com>>
Sent: Thursday, April 15, 2021 3:40 AM
To: starlingx-discuss at lists.starlingx.io<mailto:starlingx-discuss at lists.starlingx.io>
Subject: [Starlingx-discuss] Error while installing simplex virtual AIO-SX



[Please note: This e-mail is from an EXTERNAL e-mail address]

I’m getting error while trying to install the virtual AIO-SX. I have installed the ansible playbook



ansible-playbook /usr/share/ansible/stx-ansible/playbooks/bootstrap.yml



Ran these commands

source /etc/platform/openrc



OAM_IF=enp2s1

system host-if-modify controller-0 $OAM_IF -c platform

system interface-network-assign controller-0 $OAM_IF oam

system ntp-modify ntpservers=0.pool.ntp.org,1.pool.ntp.org



[root at localhost ~(keystone_admin)]# system host-unlock controller-0

Cannot unlock host controller-0 when management interface is configured on a virtual interface





$OAM_IF oamost ~(keystone_admin)]# system interface-network-assign controller-0

+--------------+--------------------------------------+

| Property     | Value                                |

+--------------+--------------------------------------+

| hostname     | controller-0                         |

| uuid         | da172ef6-6e46-4ca2-a81f-93d482e79814 |

| ifname       | enp2s1                               |

| network_name | oam                                  |

+--------------+--------------------------------------+





enp2s1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500

        inet 10.10.10.3  netmask 255.255.255.0  broadcast 0.0.0.0

        inet6 fe80::5054:ff:fe1f:51fb  prefixlen 64  scopeid 0x20<link>

        ether 52:54:00:1f:51:fb  txqueuelen 1000  (Ethernet)

        RX packets 1328682  bytes 1981399747 (1.8 GiB)

        RX errors 444  dropped 0  overruns 0  frame 444

        TX packets 399465  bytes 28981363 (27.6 MiB)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0



enp2s2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500

        inet6 fe80::5054:ff:fe30:f2cb  prefixlen 64  scopeid 0x20<link>

        ether 52:54:00:30:f2:cb  txqueuelen 1000  (Ethernet)

        RX packets 0  bytes 0 (0.0 B)

        RX errors 0  dropped 0  overruns 0  frame 0

        TX packets 517  bytes 161254 (157.4 KiB)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0



eth1000: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500

        inet6 fe80::5054:ff:fe0d:8c00  prefixlen 64  scopeid 0x20<link>

        ether 52:54:00:0d:8c:00  txqueuelen 1000  (Ethernet)

        RX packets 0  bytes 0 (0.0 B)

        RX errors 0  dropped 0  overruns 0  frame 0

        TX packets 544  bytes 158549 (154.8 KiB)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0



eth1001: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500

        inet6 fe80::5054:ff:fe91:cf78  prefixlen 64  scopeid 0x20<link>

        ether 52:54:00:91:cf:78  txqueuelen 1000  (Ethernet)

        RX packets 0  bytes 0 (0.0 B)

        RX errors 0  dropped 0  overruns 0  frame 0

        TX packets 507  bytes 158767 (155.0 KiB)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0



Any inputs on how to resolve this?



Thanks,

Babu






-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20210415/abd1457e/attachment-0001.html>


More information about the Starlingx-discuss mailing list