<div dir="ltr"><div>Hi Mary,</div><div><br></div><div>Thanks for sharing the documents.</div><div>We had a discussion in the <b>Technical Steering Committee & Community Cal</b>l yesterday 10th February 2021 regarding this.</div><div><b><br></b></div><div><b>Greg Waines</b> suggested raising 2 Launchpad Bugs - one for S/w and other for the Docs.</div><div><ul><li><a href="https://bugs.launchpad.net/starlingx/+bug/1915285" target="_blank">https://bugs.launchpad.net/starlingx/+bug/1915285</a></li><li><a href="https://bugs.launchpad.net/starlingx/+bug/1915231" target="_blank">https://bugs.launchpad.net/starlingx/+bug/1915231</a></li></ul></div><div>In case of Docs, we had found a workaround in which we found UUIDs of LAG Interfaces using the below command:</div><div>
<p class="MsoNormal"></p><ul><li>              System host-if-list worker-0 </li><li>              System host-if-list worker-1</li></ul><u></u><p></p>
<p class="MsoNormal"><u><br></u></p><p class="MsoNormal">The UUIDs were directly supplied in the commands below:</p><p class="MsoNormal"><br></p><p class="MsoNormal"></p><ul><li>system host-if-modify -m 1500 -n data0 -c data ${NODE} ${DATA0IFUUID}</li><li>system host-if-modify -m 1500 -n data1 -c data ${NODE} ${DATA1IFUUID}</li><li>system interface-datanetwork-assign ${NODE} ${DATA0IFUUID} ${PHYSNET0}</li><li>system interface-datanetwork-assign ${NODE} ${DATA1IFUUID} ${PHYSNET1}</li></ul><p></p><p class="MsoNormal"><br></p><p class="MsoNormal"><span style="color:rgb(0,0,0);white-space:pre-wrap">After this we were able to successfully unlock the worker Nodes and all the nodes were available (as shown below)</span><br></p><pre style="white-space:pre-wrap;color:rgb(0,0,0)"><font face="arial, sans-serif">[<a href="http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss" target="_blank">sysadmin at controller-0</a> ~(keystone_admin)]$ system host-list
+----+--------------+-------------+----------------+-------------+--------------+
|<i> id | hostname     | personality | administrative | operational | availability |
</i>+----+--------------+-------------+----------------+-------------+--------------+
|<i> 1  | controller-0 | controller  | unlocked       | enabled     | available    |
</i>|<i> 2  | controller-1 | controller  | unlocked       | enabled     | available    |
</i>|<i> 3  | storage-0    | storage     | unlocked       | enabled     | available    |
</i>|<i> 4  | storage-1    | storage     | unlocked       | enabled     | available    |
</i>|<i> 5  | worker-0     | worker      | unlocked       | enabled     | available    |
</i>|<i> 6  | worker-1     | worker      | unlocked       | enabled     | available    |
</i>+----+--------------+-------------+----------------+-------------+--------------+

Next we were facing an issue in Uploading of Openstack STX Application </font></pre><pre style="white-space:pre-wrap;color:rgb(0,0,0)"><font face="arial, sans-serif"><a href="http://mirror.starlingx.cengn.ca/mirror/starlingx/release/4.0.1/centos/flock/outputs/helm-charts/stx-openstack-1.0-49-centos-stable-versioned.tgz">http://mirror.starlingx.cengn.ca/mirror/starlingx/release/4.0.1/centos/flock/outputs/helm-charts/stx-openstack-1.0-49-centos-stable-versioned.tgz</a></font></pre><pre style="white-space:pre-wrap;color:rgb(0,0,0)"><font face="arial, sans-serif">For this we have raised a separate bug in which STX is expecting the data network type to be only </font><b>constants.INTERFACE_TYPE_<span style="font-family:Arial,Helvetica,sans-serif;color:rgb(34,34,34)">ETHERNET</span></b></pre><pre style="white-space:pre-wrap;color:rgb(0,0,0)"><ul><li><font face="arial, sans-serif"><a href="https://bugs.launchpad.net/starlingx/+bug/1915231" target="_blank">https://bugs.launchpad.net/starlingx/+bug/1915231</a></font></li></ul></pre><pre style="white-space:pre-wrap;color:rgb(0,0,0)"><font face="arial, sans-serif">Request you to please provide your feedback any tentative workaround to resolve the issue of upload failure of stx openstack tar</font></pre><pre style="white-space:pre-wrap;color:rgb(0,0,0)"><font face="arial, sans-serif"><br></font></pre><pre style="white-space:pre-wrap;color:rgb(0,0,0)"><font face="arial, sans-serif">Regards</font></pre><pre style="white-space:pre-wrap;color:rgb(0,0,0)"><font face="arial, sans-serif">Anirudh Gupta</font></pre><pre style="white-space:pre-wrap;color:rgb(0,0,0)"><br></pre></div><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Thu, Feb 11, 2021 at 9:42 AM Camp, MaryX <<a href="mailto:maryx.camp@intel.com" target="_blank">maryx.camp@intel.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">





<div lang="EN-US">
<div>
<p class="MsoNormal"><span style="color:rgb(0,104,181)">Hi Lokendra, Anirudh, and team,<u></u><u></u></span></p>
<p class="MsoNormal"><span style="color:rgb(0,104,181)">Thanks for submitting the STX Documentation launchpad for your issue: 
</span><a href="https://bugs.launchpad.net/starlingx/+bug/1915285" target="_blank">https://bugs.launchpad.net/starlingx/+bug/1915285</a><span style="color:rgb(0,104,181)"><u></u><u></u></span></p>
<p class="MsoNormal"><span style="color:rgb(0,104,181)"><u></u> <u></u></span></p>
<p class="MsoNormal"><span style="color:rgb(0,104,181)">We discussed it at our Docs meeting and wanted to point you to the Node Management Guide for more info.
<u></u><u></u></span></p>
<p class="MsoNormal"><span style="color:rgb(0,104,181)">Here are some relevant sections that may be helpful:<u></u><u></u></span></p>
<p class="MsoNormal"><a href="https://docs.starlingx.io/node_management/starlingx-kubernetes/node_interfaces/interface-provisioning.html" target="_blank">https://docs.starlingx.io/node_management/starlingx-kubernetes/node_interfaces/interface-provisioning.html</a><u></u><u></u></p>
<p class="MsoNormal"><a href="https://docs.starlingx.io/node_management/starlingx-kubernetes/node_interfaces/link-aggregation-settings.html" target="_blank">https://docs.starlingx.io/node_management/starlingx-kubernetes/node_interfaces/link-aggregation-settings.html</a><span style="color:rgb(0,104,181)"><u></u><u></u></span></p>
<p class="MsoNormal"><a href="https://docs.starlingx.io/node_management/starlingx-kubernetes/node_interfaces/configuring-aggregated-ethernet-interfaces-using-the-cli.html" target="_blank">https://docs.starlingx.io/node_management/starlingx-kubernetes/node_interfaces/configuring-aggregated-ethernet-interfaces-using-the-cli.html</a><span style="color:rgb(0,104,181)"><u></u><u></u></span></p>
<p class="MsoNormal"><span style="color:rgb(0,104,181)"><u></u> <u></u></span></p>
<p class="MsoNormal"><span style="color:rgb(0,104,181)">Good luck,<u></u><u></u></span></p>
<div>
<p class="MsoNormal"><span style="color:rgb(0,104,181)">Mary Camp<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:10pt;color:rgb(0,104,181)">Kelly Services Technical Writer |
</span><a href="mailto:maryx.camp@intel.com" target="_blank"><span style="font-size:10pt;color:rgb(0,104,181)">maryx.camp@intel.com</span></a><span style="font-size:10pt;color:rgb(0,104,181)"><u></u><u></u></span></p>
</div>
<p class="MsoNormal"><span style="color:rgb(0,104,181)"><u></u> <u></u></span></p>
<div>
<div style="border-right:none;border-bottom:none;border-left:none;border-top:1pt solid rgb(225,225,225);padding:3pt 0in 0in">
<p class="MsoNormal"><b>From:</b> Lokendra Singh Rathour <<a href="mailto:Lokendra.Rathour@hsc.com" target="_blank">Lokendra.Rathour@hsc.com</a>>
<br>
<b>Sent:</b> Monday, February 8, 2021 11:49 PM<br>
<b>To:</b> <a href="mailto:starlingx-discuss@lists.starlingx.io" target="_blank">starlingx-discuss@lists.starlingx.io</a><br>
<b>Subject:</b> Re: [Starlingx-discuss] [STARLINGX 4.0] APPLICATION UPLOAD GETTING FAILED - with LAG Interface<u></u><u></u></p>
</div>
</div>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">Hi Team,<u></u><u></u></p>
<p class="MsoNormal">Any update with respect the Query raised!!<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">Best Regards,<u></u><u></u></p>
<p class="MsoNormal">Lokendra<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<div>
<div style="border-right:none;border-bottom:none;border-left:none;border-top:1pt solid rgb(225,225,225);padding:3pt 0in 0in">
<p class="MsoNormal"><b>From:</b> Lokendra Singh Rathour <br>
<b>Sent:</b> Friday, February 5, 2021 5:27 PM<br>
<b>To:</b> <a href="mailto:starlingx-discuss@lists.starlingx.io" target="_blank">starlingx-discuss@lists.starlingx.io</a><br>
<b>Subject:</b> [STARLINGX 4.0] APPLICATION UPLOAD GETTING FAILED - with LAG Interface<u></u><u></u></p>
</div>
</div>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">Hello Team,<u></u><u></u></p>
<p class="MsoNormal">We are trying to setup dedicated Storage setup using StarlingX 4.0 over which we have certain observations/Error during the time of worker Node Configuration for the LAG type Data interfaces. Though we have tweaked the procedure a bit and
 successfully unlocked the Worker Nodes,we are facing the error in upload the STX Application packages. Steps as followed:<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal"><b>STEP 1:<u></u><u></u></b></p>
<p class="MsoNormal">We have created bonds for Data Network on Worker Node(reference document:
<a href="https://docs.starlingx.io/configuration/host_interface_network_config.html#:~:text=When%20a%20host%20is%20added,system%20host%2Dif%2Dadd" target="_blank">
https://docs.starlingx.io/configuration/host_interface_network_config.html#:~:text=When%20a%20host%20is%20added,system%20host%2Dif%2Dadd</a>.)<u></u><u></u></p>
<ul style="margin-top:0in" type="disc">
<ul style="margin-top:0in" type="circle">
<li style="margin-left:0in">system host-if-add worker-1 -m 1500 -a active_standby data1bond ae eth1 eth2<u></u><u></u></li><li style="margin-left:0in">system host-if-add worker-1 -m 1500 -a active_standby data2bond ae eth3 eth4<u></u><u></u></li></ul>
</ul>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal"><b>STEP 2:<u></u><u></u></b></p>
<p class="MsoNormal">Then further as per the main documents when <span style="font-size:10.5pt;font-family:"Segoe UI",sans-serif;color:rgb(51,51,51);background:white">
Configuring data interfaces for worker nodes ( reference document: </span><a href="https://docs.starlingx.io/deploy_install_guides/r4_release/bare_metal/dedicated_storage_install_kubernetes.html" target="_blank"><span style="font-size:10.5pt;font-family:"Segoe UI",sans-serif;background:white">https://docs.starlingx.io/deploy_install_guides/r4_release/bare_metal/dedicated_storage_install_kubernetes.html</span></a><span style="font-size:10.5pt;font-family:"Segoe UI",sans-serif;color:black;background:white">)</span><span style="font-size:10.5pt;font-family:"Segoe UI",sans-serif;background:white"><u></u><u></u></span></p>
<p class="MsoNormal"><u></u> <u></u></p>
<ul style="margin-top:0in" type="disc">
<li><i>SPL=/tmp/tmp-system-port-list<u></u><u></u></i></li><li><i>SPIL=/tmp/tmp-system-host-if-list</i><u></u><u></u></li></ul>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">Above files does not have the information of the created Bond interfaces for data Nodes,
<u></u><u></u></p>
<p class="MsoNormal"><b><u></u> <u></u></b></p>
<p class="MsoNormal">Further in order to ge<i>t the the value of  <span style="background:yellow">${DATA0IFUUID}</span> and
<span style="background:yellow">${DATA1IFUUID}</span> below mentioned commands are executed:</i><u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal" style="margin-left:0.5in"><i>DATA0IF=<DATA-0-PORT><u></u><u></u></i></p>
<p class="MsoNormal" style="margin-left:0.5in"><i>DATA1IF=<DATA-1-PORT><u></u><u></u></i></p>
<p class="MsoNormal" style="margin-left:0.5in"><i>PHYSNET0='physnet0'<u></u><u></u></i></p>
<p class="MsoNormal" style="margin-left:0.5in"><i>PHYSNET1='physnet1'<u></u><u></u></i></p>
<p class="MsoNormal" style="margin-left:0.5in"><i>SPL=/tmp/tmp-system-port-list<u></u><u></u></i></p>
<p class="MsoNormal" style="margin-left:0.5in"><i>SPIL=/tmp/tmp-system-host-if-list<u></u><u></u></i></p>
<p class="MsoNormal" style="margin-left:0.5in"><i><u></u> <u></u></i></p>
<p class="MsoNormal" style="margin-left:0.5in"><i># configure the datanetworks in sysinv, prior to referencing it<u></u><u></u></i></p>
<p class="MsoNormal" style="margin-left:0.5in"><i># in the ``system host-if-modify`` command'.<u></u><u></u></i></p>
<p class="MsoNormal" style="margin-left:0.5in"><i>system datanetwork-add ${PHYSNET0} vlan<u></u><u></u></i></p>
<p class="MsoNormal" style="margin-left:0.5in"><i>system datanetwork-add ${PHYSNET1} vlan<u></u><u></u></i></p>
<p class="MsoNormal" style="margin-left:0.5in"><i><u></u> <u></u></i></p>
<p class="MsoNormal" style="margin-left:0.5in"><i>for NODE in worker-0 worker-1; do<u></u><u></u></i></p>
<p class="MsoNormal" style="margin-left:0.5in"><i>  echo "Configuring interface for: $NODE"<u></u><u></u></i></p>
<p class="MsoNormal" style="margin-left:0.5in"><i>  set -ex<u></u><u></u></i></p>
<p class="MsoNormal" style="margin-left:0.5in"><i>  system host-port-list ${NODE} --nowrap > ${SPL}<u></u><u></u></i></p>
<p class="MsoNormal" style="margin-left:0.5in"><i>  system host-if-list -a ${NODE} --nowrap > ${SPIL}<u></u><u></u></i></p>
<p class="MsoNormal" style="margin-left:0.5in"><i>  DATA0PCIADDR=$(cat $SPL | grep $DATA0IF |awk '{print $8}')<u></u><u></u></i></p>
<p class="MsoNormal" style="margin-left:0.5in"><i>  DATA1PCIADDR=$(cat $SPL | grep $DATA1IF |awk '{print $8}')<u></u><u></u></i></p>
<p class="MsoNormal" style="margin-left:0.5in"><i>  DATA0PORTUUID=$(cat $SPL | grep ${DATA0PCIADDR} | awk '{print $2}')<u></u><u></u></i></p>
<p class="MsoNormal" style="margin-left:0.5in"><i>  DATA1PORTUUID=$(cat $SPL | grep ${DATA1PCIADDR} | awk '{print $2}')<u></u><u></u></i></p>
<p class="MsoNormal" style="margin-left:0.5in"><i>  DATA0PORTNAME=$(cat $SPL | grep ${DATA0PCIADDR} | awk '{print $4}')<u></u><u></u></i></p>
<p class="MsoNormal" style="margin-left:0.5in"><i>  DATA1PORTNAME=$(cat $SPL | grep ${DATA1PCIADDR} | awk '{print $4}')<u></u><u></u></i></p>
<p class="MsoNormal" style="margin-left:0.5in"><i>  DATA0IFUUID=$(cat $SPIL | awk -v DATA0PORTNAME=$DATA0PORTNAME '($12 ~ DATA0PORTNAME) {print $2}')<u></u><u></u></i></p>
<p class="MsoNormal" style="margin-left:0.5in"><i>  DATA1IFUUID=$(cat $SPIL | awk -v DATA1PORTNAME=$DATA1PORTNAME '($12 ~ DATA1PORTNAME) {print $2}')<u></u><u></u></i></p>
<p class="MsoNormal" style="margin-left:0.5in"><i>  <span style="background:yellow">
system host-if-modify -m 1500 -n data0 -c data ${NODE} ${DATA0IFUUID}<u></u><u></u></span></i></p>
<p class="MsoNormal" style="margin-left:0.5in"><i><span style="background:yellow">  system host-if-modify -m 1500 -n data1 -c data ${NODE} ${DATA1IFUUID}<u></u><u></u></span></i></p>
<p class="MsoNormal" style="margin-left:0.5in"><i><span style="background:yellow">  system interface-datanetwork-assign ${NODE} ${DATA0IFUUID} ${PHYSNET0}<u></u><u></u></span></i></p>
<p class="MsoNormal" style="margin-left:0.5in"><i><span style="background:yellow">  system interface-datanetwork-assign ${NODE} ${DATA1IFUUID} ${PHYSNET1}</span><u></u><u></u></i></p>
<p class="MsoNormal" style="margin-left:0.5in"><i>  set +ex<u></u><u></u></i></p>
<p class="MsoNormal" style="margin-left:0.5in"><i>done</i><u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">But in our case these values in the variable(<i><span style="background:yellow">${DATA0IFUUID}</span> and
<span style="background:yellow">${DATA1IFUUID}</span></i>) were not getting populated, therefore we have used the  UUID received from command :<u></u><u></u></p>
<p class="MsoNormal">              System host-if-list worker-0 <u></u><u></u></p>
<p class="MsoNormal">              System host-if-list worker-1<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal" style="margin-left:0.5in">We observed that  UUID of any ethernet interface mentioned in the file (<i>SPIL=/tmp/tmp-system-host-if-list</i><u></u><u></u></p>
<p class="MsoNormal">) matches with the UUID obtained by running the above command(System host-if-list worker-0 ) , so as we did not get the UUID from the file in case LAG Bonds we passed the Values of UUID directly.<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal"><b><u></u> <u></u></b></p>
<p class="MsoNormal"><b>STEP 3:<u></u><u></u></b></p>
<p class="MsoNormal"><b><u></u> <u></u></b></p>
<p class="MsoNormal">Using the change, we were able to successfully unlock the worker Nodes.
<u></u><u></u></p>
<p class="MsoNormal">              <u></u><u></u></p>
<table border="0" cellspacing="0" cellpadding="0" style="border-collapse:collapse">
<tbody>
<tr>
<td width="623" valign="top" style="width:467.5pt;border:1pt solid windowtext;padding:0in 5.4pt">
<p class="MsoNormal">[sysadmin@controller-0 ~(keystone_admin)]$ system host-list<u></u><u></u></p>
<p class="MsoNormal">+----+--------------+-------------+----------------+-------------+--------------+<u></u><u></u></p>
<p class="MsoNormal">| id | hostname     | personality | administrative | operational | availability |<u></u><u></u></p>
<p class="MsoNormal">+----+--------------+-------------+----------------+-------------+--------------+<u></u><u></u></p>
<p class="MsoNormal">| 1  | controller-0 | controller  | unlocked       | enabled     | available    |<u></u><u></u></p>
<p class="MsoNormal">| 2  | controller-1 | controller  | unlocked       | enabled     | available    |<u></u><u></u></p>
<p class="MsoNormal">| 3  | storage-0    | storage     | unlocked       | enabled     | available    |<u></u><u></u></p>
<p class="MsoNormal">| 4  | storage-1    | storage     | unlocked       | enabled     | available    |<u></u><u></u></p>
<p class="MsoNormal">| 5  | worker-0     | worker      | unlocked       | enabled     | available    |<u></u><u></u></p>
<p class="MsoNormal">| 6  | worker-1     | worker      | unlocked       | enabled     | available    |<u></u><u></u></p>
<p class="MsoNormal">+----+--------------+-------------+----------------+-------------+--------------+<u></u><u></u></p>
</td>
</tr>
</tbody>
</table>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal"><b>STEP 4:<u></u><u></u></b></p>
<p class="MsoNormal">Then Further while running the <b>application-upload: </b><u></u><u></u></p>
<p class="MsoNormal">              <i>system application-upload stx-openstack-<version>-centos-stable-versioned.tgz<u></u><u></u></i></p>
<p class="MsoNormal"><i><u></u> <u></u></i></p>
<p class="MsoNormal"><i>Error as below was seen<u></u><u></u></i></p>
<table border="0" cellspacing="0" cellpadding="0" style="border-collapse:collapse">
<tbody>
<tr>
<td width="1044" valign="top" style="width:782.75pt;border:1pt solid windowtext;padding:0in 5.4pt">
<p class="MsoNormal">Error:<u></u><u></u></p>
<p class="MsoNormal">2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app   File "/usr/lib64/python2.7/site-packages/sysinv/helm/helm.py", line 317, in _get_helm_chart_overrides<u></u><u></u></p>
<p class="MsoNormal">2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app     cnamespace))<u></u><u></u></p>
<p class="MsoNormal">2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app   File "/opt/platform/helm/20.06/stx-openstack/1.0-49-centos-stable-versioned/plugins/k8sapp_openstack/helm/neutron.py", line 45, in get_overrides<u></u><u></u></p>
<p class="MsoNormal">2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app     'hosts': self._get_per_host_overrides()<u></u><u></u></p>
<p class="MsoNormal">2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app   File "/opt/platform/helm/20.06/stx-openstack/1.0-49-centos-stable-versioned/plugins/k8sapp_openstack/helm/neutron.py", line 105, in _get_per_host_overrides<u></u><u></u></p>
<p class="MsoNormal">2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app     'auto_bridge_add': self._get_host_bridges(host)})<u></u><u></u></p>
<p class="MsoNormal">2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app   File "/opt/platform/helm/20.06/stx-openstack/1.0-49-centos-stable-versioned/plugins/k8sapp_openstack/helm/neutron.py", line 141, in _get_host_bridges<u></u><u></u></p>
<p class="MsoNormal">2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app     port_name = self._get_interface_port_name(iface)<u></u><u></u></p>
<p class="MsoNormal"><span style="background:yellow">2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app   File "/opt/platform/helm/20.06/stx-openstack/1.0-49-centos-stable-versioned/plugins/k8sapp_openstack/helm/neutron.py",
 line 280, in _get_interface_port_name<u></u><u></u></span></p>
<p class="MsoNormal"><span style="background:yellow">2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app     assert iface['iftype'] == constants.INTERFACE_TYPE_ETHERNET</span><u></u><u></u></p>
<p class="MsoNormal">2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app AssertionError<u></u><u></u></p>
<p class="MsoNormal">2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app<u></u><u></u></p>
<p class="MsoNormal"><i><u></u> <u></u></i></p>
</td>
</tr>
</tbody>
</table>
<p class="MsoNormal"><i><u></u> <u></u></i></p>
<p class="MsoNormal"><i><u></u> <u></u></i></p>
<p class="MsoNormal"><i>Kindly check and help in advising the way forward here w.r.t. as<u></u><u></u></i></p>
<ol style="margin-top:0in" start="1" type="1">
<li style="margin-left:0in"><i>does starlingx support for the bond interface for the Data Networks ?<u></u><u></u></i></li><ol style="margin-top:0in" start="1" type="a">
<li style="margin-left:0in"><i>if yes then do we have any supported document w.r.t the same.
<u></u><u></u></i></li></ol>
</ol>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">Reference Documents:<b><u></u><u></u></b></p>
<p class="MsoNormal">For Deployment: <a href="https://docs.starlingx.io/deploy_install_guides/r4_release/bare_metal/dedicated_storage_install_kubernetes.html" target="_blank">
<span style="font-size:10.5pt;font-family:"Segoe UI",sans-serif;background:white">https://docs.starlingx.io/deploy_install_guides/r4_release/bare_metal/dedicated_storage_install_kubernetes.html</span></a><span style="font-size:10.5pt;font-family:"Segoe UI",sans-serif;color:rgb(51,51,51);background:white"><u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:10.5pt;font-family:"Segoe UI",sans-serif;color:rgb(51,51,51);background:white">For LAG :
</span>: <a href="https://docs.starlingx.io/configuration/host_interface_network_config.html#:~:text=When%20a%20host%20is%20added,system%20host%2Dif%2Dadd" target="_blank">
https://docs.starlingx.io/configuration/host_interface_network_config.html#:~:text=When%20a%20host%20is%20added,system%20host%2Dif%2Dadd</a><u></u><u></u></p>
<p class="MsoNormal">DISCLAIMER: This electronic message and all of its contents, contains information which is privileged, confidential or otherwise protected from disclosure. The information contained in this electronic mail transmission is intended for use
 only by the individual or entity to which it is addressed. If you are not the intended recipient or may have received this electronic mail transmission in error, please notify the sender immediately and delete / destroy all copies of this electronic mail transmission
 without disclosing, copying, distributing, forwarding, printing or retaining any part of it. Hughes Systique accepts no responsibility for loss or damage arising from the use of the information transmitted by this email including damage from virus.
<u></u><u></u></p>
</div>
</div>

</blockquote></div></div>