May 2022 - Starlingx-discuss - lists.starlingx.io

[Starlingx-discuss] multi-node AIO / PXE booting
by Outback Dingo 10 May '22

10 May '22

not sure why my emails not going through so again.... I have 6 nodes, 512Gb Memory and 24TB disk 8x3TB per node can i deploy a duplex aio on 2-3 nodes? and worker/storage on 4 nodes second to that, since we cannot confirm our network environment to meet the pxe boot on 169.254 for other controller-1, worker nodes it states here https://docs.starlingx.io/planning/kubernetes/network-planning-the-pxe-boot… that we can create a pxe boot environment to boot all nodes... okay PXE Boot Network VERSION You can set up a PXE boot network for booting all nodes to allow a non-standard management network configuration. however, this doc states https://docs.starlingx.io/deploy_install_guides/r6_release/bare_metal/confi… Configure a PXE Boot Server VERSION You can optionally set up a PXE Boot Server to support controller-0 initialization. so questions: 1) can i boot all nodes from pxe server? 2) after booting installing the controller-0 node i can then pxe boot install controller-1 node 3) in this scenerio how does controller-0 discover controller-1 so i can set the host "system host-update 2 personality=controller" 4) does the same apply to workers 5) if you have 6 fully configured server each with 24TB and 512Gb memory, how would you deploy to get a full 6 nodes with storage and compute?

2 3

[Starlingx-discuss] Sanity Master Test LAYERED build ISO 20220508T230632Z
by Bran, Sebastian-Valentin 10 May '22

10 May '22

Sanity Test from 2022-May-08 (http://mirror.starlingx.cengn.ca/mirror/starlingx/master/centos/flock/20220…) Status: RED Helm-Chart used: http://mirror.starlingx.cengn.ca/mirror/starlingx/master/centos/flock/20220… All configurations are affected by these LP bugs: https://bugs.launchpad.net/starlingx/+bug/1970645 - Stx-openstack apply timeout because some pods are not ready, https://bugs.launchpad.net/starlingx/+bug/1971981 - nginx-ingress-controller apply-failed during setup of the StarlingX Kind regards, Validation team [Logo Description automatically generated] Bran Sebastian-Valentin Software Engineer PMCE TEAM Personal Mobile: +40 57487760 sebastian-valentin.bran(a)intel.com<mailto:sebastian-valentin.bran@intel.com> Str. Iancu Fotea nr. 38, mun. Galati, jud. Galati, 800017, ROMANIA Intel Romania

1 0

[Starlingx-discuss] StarlingX electorate
by Ildiko Vancsa 09 May '22

09 May '22

Hi, In preparation to the TSC election that kicks off tomorrow[2] I generated the electorate for this election. Please check if all active project contributors are listed on the etherpad and reach out to the election officials[1] if you see any issues: https://etherpad.opendev.org/p/starlingx-electorate-may-2022 Thanks, [1] https://docs.starlingx.io/election/#election-officials [2] https://docs.starlingx.io/election/#starlingx-pl-tl-and-tsc-elections-timel…

1 0

[Starlingx-discuss] Affiliation data on the Bitergia dashboard
by Ildiko Vancsa 09 May '22

09 May '22

Hi, I’m reaching out to you about the Bitergia dashboard that the project has to capture community metrics. The Bitergia team will be on site for the OpenInfra Summit in Berlin and as part of their activities they will showcase the metrics dashboard for some of the OpenInfra projects, including StarlingX. To ensure that the data that they show is correct, I would like to remind everyone to please check your affiliation information on the dashboard[1]. If your affiliation is incorrect please reach out to me ASAP and I will get it fixed for you! Please let me know if you have any questions. Thanks, Ildikó [1] https://starlingx.biterg.io/app/kibana#/dashboard/cce903f0-2892-11e9-9a7c-2…:'Custom%20Affiliations%20panel%20for%20OpenStack',filters:!(('$state':(store:appState),meta:(alias:Bots,disabled:!f,index:git,key:author_bot,negate:!t,params:(query:!t,type:phrase),type:phrase,value:true),query:(match:(author_bot:(query:!t,type:phrase))))),fullScreenMode:!f,options:(darkTheme:!f,useMargins:!t),panels:!((embeddableConfig:(title:'Authors%20by%20Organization',vis:(legendOpen:!t)),gridData:(h:20,i:'6',w:28,x:20,y:0),id:affiliations_authors_organizations,panelIndex:'6',title:'Authors%20by%20Organization',type:visualization,version:'6.8.6'),(embeddableConfig:(title:Authors,vis:(params:(config:(searchKeyword:''),sort:(columnIndex:!n,direction:!n)))),gridData:(h:36,i:'8',w:28,x:0,y:20),id:affiliations_authors,panelIndex:'8',title:Authors,type:visualization,version:'6.8.6'),(embeddableConfig:(title:'Data%20Sources'),gridData:(h:12,i:'9',w:20,x:0,y:8),id:affiliations_data_sources,panelIndex:'9',title:'Data%20Sources',type:visualization,version:'6.8.6'),(gridData:(h:8,i:'10',w:20,x:0,y:0),id:'99230770-e0f1-11e8-8aac-ef7fd4d8cbad',panelIndex:'10',title:'Data%20Source',type:visualization,version:'6.8.6'),(gridData:(h:8,i:'11',w:48,x:0,y:56),id:'8d619890-136c-11e9-8aac-ef7fd4d8cbad',panelIndex:'11',title:Affiliations,type:visualization,version:'6.8.6'),(embeddableConfig:(vis:(params:(config:(searchKeyword:''),sort:(columnIndex:!n,direction:!n)))),gridData:(h:36,i:'12',w:20,x:28,y:20),id:c0327c20-2a38-11e9-9a7c-254518135e42,panelIndex:'12',title:Organizations,type:visualization,version:'6.8.6')),query:(language:lucene,query:(query_string:(analyze_wildcard:!t,default_field:'*',query:'*'))),timeRestore:!f,title:Affiliations,viewMode:view)

1 0

[Starlingx-discuss] Call for a virtual project update
by Ildiko Vancsa 09 May '22

09 May '22

Hi everyone, As the Berlin Summit is approaching in June, we are collecting __video recordings to capture a project update__ from each OpenInfa community to showcase what each project has accomplished in the past year/release. We will post all recordings on the OpenInfra Foundation YouTube channel and promote them at the Summit, if they are available before the event. __We recommend the recordings to be less than 10 minutes long.__ Slides are not mandatory, but could be good to have some to support the information the presenter is sharing in the video. You can use the overview slide deck[1] for slide template. If you can submit your project recording to me __by Friday, May 27__, we’d love to promote them at the upcoming Berlin Summit. If you prefer to submit it after the Summit, I’ll send out another reminder after the event to collect any reminding recordings. Please let me know if you have any questions. Thanks, Ildikó [1] https://opendev.org/starlingx/docs/src/branch/master/resources/StarlingX_On…

1 0

[Starlingx-discuss] stx 6.0 in a VM / Saving config in sysinv database fails timeout
by Outback Dingo 09 May '22

09 May '22

curiously, while trying to do some testing on pxe, i noticed starlingx bootstrap times out in a VM, i found this in sysinv.log TASK [bootstrap/persist-config : debug] *********************************************************************************************************************** Monday 09 May 2022 11:27:51 +0000 (0:29:57.887) 0:39:28.205 ************ ok: [localhost] => populate_result: changed: true failed: false failed_when_result: false msg: non-zero return code rc: 1 stderr: |- Traceback (most recent call last): File "/tmp/.ansible-sysadmin/tmp/ansible-tmp-1652093873.31-134751541330122/populate_initial_config.py", line 1119, in <module> inventory_config_complete_wait(client, controller) File "/tmp/.ansible-sysadmin/tmp/ansible-tmp-1652093873.31-134751541330122/populate_initial_config.py", line 1073, in inventory_config_complete_wait wait_initial_inventory_complete(client, controller) File "/tmp/.ansible-sysadmin/tmp/ansible-tmp-1652093873.31-134751541330122/populate_initial_config.py", line 1064, in wait_initial_inventory_complete raise ConfigFail('Timeout waiting for controller inventory ' __main__.ConfigFail: Timeout waiting for controller inventory completion stderr_lines: - 'Traceback (most recent call last):' - ' File "/tmp/.ansible-sysadmin/tmp/ansible-tmp-1652093873.31-134751541330122/populate_initial_config.py", line 1119, in <module>' - ' inventory_config_complete_wait(client, controller)' - ' File "/tmp/.ansible-sysadmin/tmp/ansible-tmp-1652093873.31-134751541330122/populate_initial_config.py", line 1073, in inventory_config_complete_wait' - ' wait_initial_inventory_complete(client, controller)' - ' File "/tmp/.ansible-sysadmin/tmp/ansible-tmp-1652093873.31-134751541330122/populate_initial_config.py", line 1064, in wait_initial_inventory_complete' - ' raise ConfigFail(''Timeout waiting for controller inventory ''' - '__main__.ConfigFail: Timeout waiting for controller inventory completion' stdout: |- Populating system config... System config completed. Populating load config... Load config completed. Populating management network... Populating pxeboot network... Populating oam network... Populating multicast network... Populating cluster host network... Populating cluster pod network... Populating cluster service network... Network config completed. Populating/Updating DNS config... DNS config completed. Populating/Updating docker registry config... Docker registry config completed. Populating/Updating kubernetes san list... Populating/Updating kubernetes config... Kubernetes config completed. Management mac = 00:00:00:00:00:00 Root fs device = /dev/disk/by-path/pci-0000:02:02.0-ata-2.0 Boot device = /dev/disk/by-path/pci-0000:02:02.0-ata-2.0 Console = tty0 Tboot = false Install output = text Host values = {'tboot': 'false', 'install_output': 'text', 'rootfs_device': '/dev/disk/by-path/pci-0000:02:02.0-ata-2.0', 'boot_device': '/dev/disk/by-path/pci-0000:02:02.0-ata-2.0', 'availability': 'offline', 'mgmt_mac': '00:00:00:00:00:00', 'console': 'tty0', 'mgmt_ip': '192.168.204.2', 'hostname': 'controller-0', 'operational': 'disabled', 'invprovision': 'provisioning', 'administrative': 'locked', 'personality': 'controller'} Host controller-0 created. Failed to update the initial system config. stdout_lines: - Populating system config... - System config completed. - Populating load config... - Load config completed. - Populating management network... - Populating pxeboot network... - Populating oam network... - Populating multicast network... - Populating cluster host network... - Populating cluster pod network... - Populating cluster service network... - Network config completed. - Populating/Updating DNS config... - DNS config completed. - Populating/Updating docker registry config... - Docker registry config completed. - Populating/Updating kubernetes san list... - Populating/Updating kubernetes config... - Kubernetes config completed. - Management mac = 00:00:00:00:00:00 - Root fs device = /dev/disk/by-path/pci-0000:02:02.0-ata-2.0 - Boot device = /dev/disk/by-path/pci-0000:02:02.0-ata-2.0 - Console = tty0 - Tboot = false - Install output = text - 'Host values = {''tboot'': ''false'', ''install_output'': ''text'', ''rootfs_device'': ''/dev/disk/by-path/pci-0000:02:02.0-ata-2.0'', ''boot_device'': ''/dev/disk/by-path/pci-0000:02:02.0-ata-2.0'', ''availability'': ''offline'', ''mgmt_mac'': ''00:00:00:00:00:00'', ''console'': ''tty0'', ''mgmt_ip'': ''192.168.204.2'', ''hostname'': ''controller-0'', ''operational'': ''disabled'', ''invprovision'': ''provisioning'', ''administrative'': ''locked'', ''personality'': ''controller''}' - Host controller-0 created. - Failed to update the initial system config. TASK [bootstrap/persist-config : Fail if populate config script throws an exception] ************************************************************************** Monday 09 May 2022 11:27:51 +0000 (0:00:00.069) 0:39:28.275 ************ fatal: [localhost]: FAILED! => changed=false msg: Failed to provision initial system configuration. will fail the timeout sysinv 2022-05-09 11:24:21.703 98797 ERROR sysinv.conductor.kube_app [-] Kubernetes is not configured. API operations will not be available.: KubeNotConfigured: Kubernetes is not configured. API operations will not be available. sysinv 2022-05-09 11:25:03.484 91940 INFO sysinv.agent.manager [-] _report_to_conductor initial_reports_required=set(['disk', 'lvg', 'pv', 'memory']) sysinv 2022-05-09 11:25:03.485 91940 INFO sysinv.agent.manager [-] Sysinv Agent audit running inv_get_and_report. sysinv 2022-05-09 11:25:04.395 91940 WARNING sysinv.agent.pci [-] Enabling device ens5 to query link speed: CalledProcessError: Command '['query_pci_id', '-v 0x8086', '-d 0x100e']' returned non-zero exit status 1 sysinv 2022-05-09 11:25:04.403 91940 WARNING sysinv.agent.pci [-] ATTR speed unknown for: ens5 (flags: 0x1002): IOError: [Errno 22] Invalid argument sysinv 2022-05-09 11:25:04.404 91940 WARNING sysinv.agent.pci [-] Disabling device ens5 after querying link speed: IOError: [Errno 22] Invalid argument sysinv 2022-05-09 11:25:04.527 98797 INFO sysinv.conductor.manager [-] Updating platform data for host: 7be69b7e-5660-48d8-ad95-28af6222da2e with: {u'first_report': True} sysinv 2022-05-09 11:25:04.549 91940 INFO sysinv.agent.manager [-] Sysinv Agent platform update by host: {'first_report': True} sysinv 2022-05-09 11:25:04.549 91940 INFO sysinv.agent.manager [-] Agent found matching ihost: 7be69b7e-5660-48d8-ad95-28af6222da2e sysinv 2022-05-09 11:25:04.550 91940 INFO sysinv.agent.manager [-] _report_to_conductor initial_reports_required=set(['disk', 'lvg', 'pv', 'memory']) sysinv 2022-05-09 11:25:05.106 98797 INFO sysinv.conductor.manager [-] port 852027ed-3a24-4658-aa62-6f8273ce39bb update attr: {'speed': u'1000', 'sriov_vfs_pci_address': u'', 'sriov_totalvfs': None, 'sriov_vf_pdevice_id': None, 'dpdksupport': False, 'sriov_numvfs': 0, 'driver': u'e1000', 'sriov_vf_driver': None} sysinv 2022-05-09 11:25:05.289 98797 INFO sysinv.conductor.manager [-] port 8a1db02d-ad08-4eb2-b4a7-a42ca5bfcfef update attr: {'speed': None, 'sriov_vfs_pci_address': u'', 'sriov_totalvfs': None, 'sriov_vf_pdevice_id': None, 'dpdksupport': False, 'sriov_numvfs': 0, 'driver': u'e1000', 'sriov_vf_driver': None} sysinv 2022-05-09 11:25:05.376 98797 INFO sysinv.conductor.manager [-] update 0000:00:01.1 attr: {'sriov_numvfs': 0, 'driver': u'ata_piix', 'sriov_vf_driver': None, 'sriov_vf_pdevice_id': None, 'psvendor': u'XenSource, Inc.', 'extra_info': None, 'pdevice_id': u'7010', 'pclass': u'IDE interface', 'psdevice': u'Device 0001', 'sriov_vfs_pci_address': u'', 'pvendor': u'Intel Corporation', 'pvendor_id': u'8086', 'pclass_id': u'010180', 'sriov_totalvfs': None} sysinv 2022-05-09 11:25:05.404 98797 INFO sysinv.conductor.manager [-] update 0000:00:01.2 attr: {'sriov_numvfs': 0, 'driver': u'uhci_hcd', 'sriov_vf_driver': None, 'sriov_vf_pdevice_id': None, 'psvendor': u'XenSource, Inc.', 'extra_info': None, 'pdevice_id': u'7020', 'pclass': u'USB controller', 'psdevice': u'Device 0001', 'sriov_vfs_pci_address': u'', 'pvendor': u'Intel Corporation', 'pvendor_id': u'8086', 'pclass_id': u'0c0300', 'sriov_totalvfs': None} sysinv 2022-05-09 11:25:05.432 98797 INFO sysinv.conductor.manager [-] update 0000:00:02.0 attr: {'sriov_numvfs': 0, 'driver': None, 'sriov_vf_driver': None, 'sriov_vf_pdevice_id': None, 'psvendor': u'Device 0001', 'extra_info': None, 'pdevice_id': u'1111', 'pclass': u'VGA compatible controller', 'psdevice': u'Device 0001', 'sriov_vfs_pci_address': u'', 'pvendor': u'Vendor 1234', 'pvendor_id': u'1234', 'pclass_id': u'030000', 'sriov_totalvfs': None} sysinv 2022-05-09 11:25:05.460 98797 INFO sysinv.conductor.manager [-] update 0000:00:03.0 attr: {'sriov_numvfs': 0, 'driver': None, 'sriov_vf_driver': None, 'sriov_vf_pdevice_id': None, 'psvendor': u'XenSource, Inc.', 'extra_info': None, 'pdevice_id': u'0001', 'pclass': u'SCSI storage controller', 'psdevice': u'Xen Platform Device', 'sriov_vfs_pci_address': u'', 'pvendor': u'XenSource, Inc.', 'pvendor_id': u'5853', 'pclass_id': u'010000', 'sriov_totalvfs': None} sysinv 2022-05-09 11:25:05.545 98797 INFO sysinv.conductor.manager [-] Already in db numa_node=0 mynuma_nodes=[0, 2, 4, 6, 8, 10, 12, 14] sysinv 2022-05-09 11:25:05.545 98797 INFO sysinv.conductor.manager [-] Already in db numa_node=2 mynuma_nodes=[0, 2, 4, 6, 8, 10, 12, 14] sysinv 2022-05-09 11:25:05.545 98797 INFO sysinv.conductor.manager [-] Already in db numa_node=4 mynuma_nodes=[0, 2, 4, 6, 8, 10, 12, 14] sysinv 2022-05-09 11:25:05.546 98797 INFO sysinv.conductor.manager [-] Already in db numa_node=6 mynuma_nodes=[0, 2, 4, 6, 8, 10, 12, 14] sysinv 2022-05-09 11:25:05.548 98797 INFO sysinv.conductor.manager [-] Already in db numa_node=8 mynuma_nodes=[0, 2, 4, 6, 8, 10, 12, 14] sysinv 2022-05-09 11:25:05.548 98797 INFO sysinv.conductor.manager [-] Already in db numa_node=10 mynuma_nodes=[0, 2, 4, 6, 8, 10, 12, 14] sysinv 2022-05-09 11:25:05.549 98797 INFO sysinv.conductor.manager [-] Already in db numa_node=12 mynuma_nodes=[0, 2, 4, 6, 8, 10, 12, 14] sysinv 2022-05-09 11:25:05.549 98797 INFO sysinv.conductor.manager [-] Already in db numa_node=14 mynuma_nodes=[0, 2, 4, 6, 8, 10, 12, 14] sysinv 2022-05-09 11:25:05.598 98797 INFO sysinv.conductor.manager [-] Logical CPU topology: host:controller-0 (controller,worker,lowlatency), sockets:8, cores/socket=1, threads/core=1, reference:current (unchanged) sysinv 2022-05-09 11:25:05.598 98797 INFO sysinv.conductor.manager [-] cpu_id : 0 1 2 3 4 5 6 7 sysinv 2022-05-09 11:25:05.599 98797 INFO sysinv.conductor.manager [-] socket_id : 0 2 4 6 8 10 12 14 sysinv 2022-05-09 11:25:05.600 98797 INFO sysinv.conductor.manager [-] core_id : 0 0 0 0 0 0 0 0 sysinv 2022-05-09 11:25:05.601 98797 INFO sysinv.conductor.manager [-] thread_id : 0 0 0 0 0 0 0 0 sysinv 2022-05-09 11:25:05.615 98797 INFO sysinv.conductor.manager [-] update_grub_config, host uuid: (7be69b7e-5660-48d8-ad95-28af6222da2e), force: (False) sysinv 2022-05-09 11:25:05.616 98797 INFO sysinv.conductor.manager [-] _config_update_hosts personalities=['controller', 'worker'] host_uuids=[u'7be69b7e-5660-48d8-ad95-28af6222da2e'] reboot=False config_uuid=0fd14450-6057-43bc-a429-17de31115a16 tb= File "/usr/lib64/python2.7/site-packages/sysinv/conductor/manager.py", line 9644, in update_grub_config host_uuids=[host_uuid]) sysinv 2022-05-09 11:25:05.630 98797 INFO sysinv.conductor.manager [-] Setting config target of host 'controller-0' to '8fd14450-6057-43bc-a429-17de31115a16'. sysinv 2022-05-09 11:25:05.662 98797 INFO sysinv.conductor.manager [-] _config_update_hosts config_uuid=0fd14450-6057-43bc-a429-17de31115a16 sysinv 2022-05-09 11:25:05.668 98797 INFO sysinv.conductor.manager [-] applying runtime manifest config_uuid=0fd14450-6057-43bc-a429-17de31115a16, classes: ['platform::compute::grub::runtime', 'platform::compute::config::runtime'] sysinv 2022-05-09 11:25:05.685 98797 INFO sysinv.conductor.manager [-] Cannot generate the configuration for controller-0, the host is not inventoried yet. sysinv 2022-05-09 11:25:05.685 98797 INFO sysinv.conductor.manager [-] Evaluating apps reapply {'type': 'runtime-apply-puppet'} sysinv 2022-05-09 11:25:05.685 98797 INFO sysinv.conductor.manager [-] Apps reapply order: [] sysinv 2022-05-09 11:25:05.687 98797 INFO sysinv.agent.rpcapi [-] config_apply_runtime_manifest: fanout_cast: sending config 0fd14450-6057-43bc-a429-17de31115a16 {'classes': ['platform::compute::grub::runtime', 'platform::compute::config::runtime'], 'force': False, 'personalities': ['controller', 'worker'], 'host_uuids': [u'7be69b7e-5660-48d8-ad95-28af6222da2e']} to agent sysinv 2022-05-09 11:25:05.699 91940 ERROR sysinv.openstack.common.periodic_task [-] Error during AgentManager._agent_audit: [Errno 2] No such file or directory: '/sys/devices/system/node/node1/hugepages': OSError: [Errno 2] No such file or directory: '/sys/devices/system/node/node1/hugepages' 2022-05-09 11:25:05.699 91940 ERROR sysinv.openstack.common.periodic_task Traceback (most recent call last): 2022-05-09 11:25:05.699 91940 ERROR sysinv.openstack.common.periodic_task File "/usr/lib64/python2.7/site-packages/sysinv/openstack/common/periodic_task.py", line 180, in run_periodic_tasks 2022-05-09 11:25:05.699 91940 ERROR sysinv.openstack.common.periodic_task task(self, context) 2022-05-09 11:25:05.699 91940 ERROR sysinv.openstack.common.periodic_task File "/usr/lib64/python2.7/site-packages/sysinv/agent/manager.py", line 1253, in _agent_audit 2022-05-09 11:25:05.699 91940 ERROR sysinv.openstack.common.periodic_task force_updates=None) 2022-05-09 11:25:05.699 91940 ERROR sysinv.openstack.common.periodic_task File "/usr/lib/python2.7/site-packages/oslo_concurrency/lockutils.py", line 328, in inner 2022-05-09 11:25:05.699 91940 ERROR sysinv.openstack.common.periodic_task return f(*args, **kwargs) 2022-05-09 11:25:05.699 91940 ERROR sysinv.openstack.common.periodic_task File "/usr/lib64/python2.7/site-packages/sysinv/agent/manager.py", line 1272, in agent_audit 2022-05-09 11:25:05.699 91940 ERROR sysinv.openstack.common.periodic_task self.ihost_inv_get_and_report(icontext) 2022-05-09 11:25:05.699 91940 ERROR sysinv.openstack.common.periodic_task File "/usr/lib64/python2.7/site-packages/sysinv/agent/manager.py", line 878, in ihost_inv_get_and_report 2022-05-09 11:25:05.699 91940 ERROR sysinv.openstack.common.periodic_task imemory = self._inode_operator.inodes_get_imemory() 2022-05-09 11:25:05.699 91940 ERROR sysinv.openstack.common.periodic_task File "/usr/lib64/python2.7/site-packages/sysinv/agent/node.py", line 566, in inodes_get_imemory 2022-05-09 11:25:05.699 91940 ERROR sysinv.openstack.common.periodic_task imemory = self._inode_get_memory_hugepages() 2022-05-09 11:25:05.699 91940 ERROR sysinv.openstack.common.periodic_task File "/usr/lib64/python2.7/site-packages/sysinv/agent/node.py", line 347, in _inode_get_memory_hugepages 2022-05-09 11:25:05.699 91940 ERROR sysinv.openstack.common.periodic_task subdirs = self._get_immediate_subdirs(hugepages) 2022-05-09 11:25:05.699 91940 ERROR sysinv.openstack.common.periodic_task File "/usr/lib64/python2.7/site-packages/sysinv/agent/node.py", line 279, in _get_immediate_subdirs 2022-05-09 11:25:05.699 91940 ERROR sysinv.openstack.common.periodic_task return [name for name in listdir(dir) 2022-05-09 11:25:05.699 91940 ERROR sysinv.openstack.common.periodic_task OSError: [Errno 2] No such file or directory: '/sys/devices/system/node/node1/hugepages' 2022-05-09 11:25:05.699 91940 ERROR sysinv.openstack.common.periodic_task sysinv 2022-05-09 11:25:21.715 98797 ERROR sysinv.conductor.kube_app [-] Kubernetes is not configured. API operations will not be available.: KubeNotConfigured: Kubernetes is not configured. API operations will not be available.

1 0

[Starlingx-discuss] pxe boot network / 6.0
by Outback Dingo 09 May '22

09 May '22

Im trying to deploy 6 nodes with 512G ram and 24TB disk each Im envisioning 2-3 AIO DUPLEX Controller and 4 WORKER/STORAGE SO i deployed a single AIO duplex node, works fine, then had issues with pxe booting other nodes from it, due to switch configuration, without having to reinvent the switch topology to accomodate the pxe 169.254.202.1 pxe network, im reading below where it states PXE Boot Network VERSION You can set up a PXE boot network for booting all nodes to allow a non-standard management network configuration. The internal management network is used for PXE booting of new hosts and the PXE boot network is not required. However there are scenarios where the internal management network cannot be used for PXE booting of new hosts. For example, if the internal management network needs to be on a VLAN-tagged network for deployment reasons, or if it must support IPv6, you must configure the optional untagged PXE boot network for PXE booting of new hosts using IPv4. According to: https://docs.starlingx.io/deploy_install_guides/r6_release/bare_metal/confi… Okay so it seems i need to go this route, and pxe boot all nodes, however.. reading the configure a pxe boot server doc, it states "You can optionally set up a PXE Boot Server to support controller-0 initialization." so this tells me that it can only be used for pxe booting controller-0 ???? https://docs.starlingx.io/deploy_install_guides/r6_release/bare_metal/confi… so questions: 1) can i boot multiple aio duplex from a pxe boot server 2) once controller-0 is up, how does controller-1 connect to it. 3) which then i have to inquire how does discovery work for controller-1 on controller-0 4) in your opinions, which are welcome, how should i be deploying 6 nodes with this much memery and storage per node, to use 3 as controllers, and all 6 as compute/storage nodes?

1 0

[Starlingx-discuss] [build-report] STX_build_pre_installer - Build # 1429 - Failure!
by build.starlingx＠gmail.com 09 May '22

09 May '22

Project: STX_build_pre_installer Build #: 1429 Status: Failure Timestamp: 20220509T044112Z Branch: Check logs at: http://mirror.starlingx.cengn.ca/mirror/starlingx/master/centos/monolithic/… -------------------------------------------------------------------------------- Parameters MY_WORKSPACE: /localdisk/loadbuild/jenkins/master/20220509T043001Z DOCKER_BUILD_ID: jenkins-master-20220509T043001Z-builder OS: centos MY_REPO: /localdisk/designer/jenkins/master/cgcs-root PUBLISH_LOGS_URL: http://mirror.starlingx.cengn.ca/mirror/starlingx/master/centos/monolithic/… PUBLISH_LOGS_BASE: /export/mirror/starlingx/master/centos/monolithic/20220509T043001Z/logs MASTER_JOB_NAME: STX_build_master_master MY_REPO_ROOT: /localdisk/designer/jenkins/master

1 0

[Starlingx-discuss] Sanity Master Test LAYERED build ISO 20220507T013750Z
by Bran, Sebastian-Valentin 09 May '22

09 May '22

Sanity Test from 2022-May-07 (http://mirror.starlingx.cengn.ca/mirror/starlingx/master/centos/flock/20220…) Status: RED Helm-Chart used: http://mirror.starlingx.cengn.ca/mirror/starlingx/master/centos/flock/20220… All configurations are affected by these LP bugs: https://bugs.launchpad.net/starlingx/+bug/1970645 - Stx-openstack apply timeout because some pods are not ready, https://bugs.launchpad.net/starlingx/+bug/1971981 - nginx-ingress-controller apply-failed during setup of the StarlingX Kind regards, Validation team [Logo Description automatically generated] Bran Sebastian-Valentin Software Engineer PMCE TEAM Personal Mobile: +40 57487760 sebastian-valentin.bran(a)intel.com<mailto:sebastian-valentin.bran@intel.com> Str. Iancu Fotea nr. 38, mun. Galati, jud. Galati, 800017, ROMANIA Intel Romania

1 0

[Starlingx-discuss] [docs] [meeting] Docs team notes 04-May-22
by Balaraj, Juanita 08 May '22

08 May '22

Hello all, Here are last week's docs team meeting minutes (short form). Details in [2]. Join us if you have interest in StarlingX docs! We meet on Wednesdays 12:30 PST. [1] Call logistics: https://wiki.openstack.org/wiki/Starlingx/Meetings<https://urldefense.com/v3/__https:/wiki.openstack.org/wiki/Starlingx/Meetin…> [2] Tracking Etherpad: https://etherpad.openstack.org/p/stx-documentation<https://urldefense.com/v3/__https:/etherpad.openstack.org/p/stx-documentati…> Thanks, Juanita Balaraj ============ 04-May-22 * Bug status -- 6 total o Query for LP that are tagged for docs: https://bugs.launchpad.net/starlingx/+bugs?field.tag=stx.docs o Use caution when working on LP, especially if seems related to WR (like wr-openstack issue). * Stx 7.0 Release; https://docs.google.com/spreadsheets/d/171PJAu9SykXm9h9Ny2IsZ8YMbhvEwOzuTbI… - Juanita to complete doc tasks associated with Stories * Message from Ildiko: IMPORTANT REMINDER: If you would like to run for any open seat you need to register as an Open Infrastructure Foundation individual member prior to when the nomination period starts. The nomination period officially begins on __May 10, 2022, 2000 UTC__. For all the details on the elections please visit: https://docs.starlingx.io/election/Elections - https://docs.starlingx.io/election/ (https://etherpad.opendev.org/p/stx-cores) * A few Cherry picks were completed; https://review.opendev.org/q/%2509starlingx/docs * Status of Open Gerrit reviews: https://review.opendev.org/q/starlingx/docs+status:open _______________________________________________ Starlingx-discuss mailing list Starlingx-discuss(a)lists.starlingx.io<mailto:Starlingx-discuss@lists.starlingx.io> http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss<https://urldefense.com/v3/__http:/lists.starlingx.io/cgi-bin/mailman/listin…>

1 0