From: vivekanandan.rajendran.devops@tag.ooo <vivekanandan.rajendran.devops@tag.ooo>
Sent: 20 May 2024 4:35 PM
To: Starlingx Discuss <starlingx-discuss@lists.starlingx.io>
Subject: Re: unable to unlock controller-0 in virtual environment using libvirt
CAUTION: This email comes from a non Wind River email account!
Do not click links or open attachments unless you recognize the sender and know the content is safe.
On 2024-05-20 19:47, vivekanandan.rajendran.devops@tag.ooo wrote:
> On 2024-05-20 18:18, vivekanandan.rajendran.devops@tag.ooo wrote:
>> On 2024-05-20 17:13, vivekanandan.rajendran.devops@tag.ooo wrote:
>>> Hi,
>>> I am unable to unlock controller-0 after doing the ansible playbook
>>> and following the steps.
>>>
>>> OAM_IF=enp2s1
>>> system host-if-modify controller-0 $OAM_IF -c platform
>>> system interface-network-assign controller-0 $OAM_IF oam
>>>
>>> [sysadmin@localhost ~(keystone_admin)]$ system host-unlock
>>> controller-0
>>> Cannot unlock host controller-0 when management interface is
>>> configured on a virtual interface.
>>> [sysadmin@localhost ~(keystone_admin)]$
>>>
>>> am I doing something wrong , following are interfaces. which one I
>>> have to assign correctly. Please advise me.
>>> Thanks
>>> -Vivek
>>>
>>> [sysadmin@localhost ~(keystone_admin)]$ ip a
>>> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
>>> group default qlen 1000
>>> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>>> inet 127.0.0.1/8 scope host lo
>>> valid_lft forever preferred_lft forever
>>> inet 192.168.204.2/24 brd 192.168.204.255 scope host lo:1
>>> valid_lft forever preferred_lft forever
>>> inet 192.168.206.2/24 brd 192.168.206.255 scope host lo:5
>>> valid_lft forever preferred_lft forever
>>> inet 169.254.202.1/24 scope host lo
>>> valid_lft forever preferred_lft forever
>>> inet 192.168.204.1/24 scope host secondary lo
>>> valid_lft forever preferred_lft forever
>>> inet 192.168.206.1/24 scope host secondary lo
>>> valid_lft forever preferred_lft forever
>>> inet6 ::1/128 scope host
>>> valid_lft forever preferred_lft forever
>>> 2: enp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel
>>> state UP group default qlen 1000
>>> link/ether 52:54:00:7e:37:6c brd ff:ff:ff:ff:ff:ff
>>> inet6 fe80::5054:ff:fe7e:376c/64 scope link
>>> valid_lft forever preferred_lft forever
>>> 3: enp4s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel
>>> state UP group default qlen 1000
>>> link/ether 52:54:00:42:87:a0 brd ff:ff:ff:ff:ff:ff
>>> inet6 fe80::5054:ff:fe42:87a0/64 scope link
>>> valid_lft forever preferred_lft forever
>>> 4: enp2s1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel
>>> state UP group default qlen 1000
>>> link/ether 52:54:00:4b:d8:f6 brd ff:ff:ff:ff:ff:ff
>>> inet 10.10.10.2/24 scope global enp2s1
>>> valid_lft forever preferred_lft forever
>>> inet6 fe80::5054:ff:fe4b:d8f6/64 scope link
>>> valid_lft forever preferred_lft forever
>>> 5: enp2s2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel
>>> state UP group default qlen 1000
>>> link/ether 52:54:00:69:38:80 brd ff:ff:ff:ff:ff:ff
>>> inet6 fe80::5054:ff:fe69:3880/64 scope link
>>> valid_lft forever preferred_lft forever
>> Hi All,
>> Please advise me how to proceed with this simplex-aio-controller
>> libvirtd install.
>> Thanks
>> -Vivek
> Hi ,
> I think i did not put system_mode: simplex in default.yml
> Thanks
> -Vivek
I have made this as simplex still its showing duplex
[MT] There is a boot menu on the ISO, which will default to standard/duplex install if you do not select anything within 10 seconds. When working
with the libvirt tools you should be able to attach to the console before the timeout. Then you can select the AIO option.
Either destroy the configuration and repeat setup_configuration.sh, or use 'sudo wipedisk' command on the incorrectly installed cluster and then edit the domain xml to boot from ISO 'virsh edit $domain'
M
+----------------------+--------------------------------------+
| Property | Value |
+----------------------+--------------------------------------+
| contact | None |
| created_at | 2024-05-20T20:05:28.358244+00:00 |
| description | None |
| https_enabled | False |
| latitude | None |
| location | None |
| longitude | None |
| name | a825dad3-1091-4e2d-b14f-5f893c144239 |
| region_name | RegionOne |
| sdn_enabled | False |
| security_feature | spectre_meltdown_v1 |
| service_project_name | services |
| software_version | 24.03 |
| system_mode | duplex |
| system_type | Standard |
| timezone | UTC |
| updated_at | 2024-05-20T20:06:00.589379+00:00 |
| uuid | 37d64366-c546-45ed-8fa9-4bd2fab0c011 |
| vswitch_type | none |
+----------------------+--------------------------------------+
[sysadmin@localhost ~(keystone_admin)]$
Can anyone please help?
Thanks
-Vivek