Hi Austin,

- Here is the spec

Intel(R) Xeon(R) CPU D-1557 @ 1.50GHz

RAM : 32GB (Is this the problem? I already saw for the controller 64GB RAM is needed, but I'm not sure, cause the installation was just stuck literally,

SSD : 500GB

SuperMicro

- Bios Setting:

I enabled and disabled as the instruction said.

And at first try, I didn't used UEFI, after failure, I changed it into UEFI, but the result was same.

I enabled VTx/Iommu enable or not ?

2. I used bare metal one.. however when I pressed the buttons, nothing happened. And the controller-1 is just stopped as I said before.

Thank you for helping me :)

Best Regards,

Jaewook.

2019년 2월 22일 (금) 오후 5:02, Sun, Austin <austin.sun@intel.com>님이 작성:

Hi Jaewook:

1. Could you share the hw info for controller-1 ? and check bios setting ? is it using UEFI ? VTx/Iommu enable or not ?

2. Could you try access controller-1 and press Alt+F10 to see any log if the system is bare metal ?

Thanks.

BR
Austin Sun.

From: Jaewook Oh [mailto:kyle.oh95@gmail.com]
Sent: Friday, February 22, 2019 2:54 PM
To: starlingx-discuss <starlingx-discuss@lists.starlingx.io>
Subject: [Starlingx-discuss] Duplex PXE Booting seems failed

Hello StarlingX Team,

I finally solved the horizon error, the port number was different.

I don't know why the port was changed, but anyway the port number was 8080, not 80.

But I'm now facing new obstacles, Duplex PXE Booting.

I succeed to connect PXE mode, but no more process..

In Controller-0, I can find below result,