I’m getting error while trying to install the virtual AIO-SX. I have installed the ansible playbook ansible-playbook /usr/share/ansible/stx-ansible/playbooks/bootstrap.yml Ran these commands source /etc/platform/openrc OAM_IF=enp2s1 system host-if-modify controller-0 $OAM_IF -c platform system interface-network-assign controller-0 $OAM_IF oam system ntp-modify ntpservers=0.pool.ntp.org,1.pool.ntp.org [root@localhost ~(keystone_admin)]# system host-unlock controller-0 Cannot unlock host controller-0 when management interface is configured on a virtual interface $OAM_IF oamost ~(keystone_admin)]# system interface-network-assign controller-0 +--------------+--------------------------------------+ | Property | Value | +--------------+--------------------------------------+ | hostname | controller-0 | | uuid | da172ef6-6e46-4ca2-a81f-93d482e79814 | | ifname | enp2s1 | | network_name | oam | +--------------+--------------------------------------+ enp2s1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 10.10.10.3 netmask 255.255.255.0 broadcast 0.0.0.0 inet6 fe80::5054:ff:fe1f:51fb prefixlen 64 scopeid 0x20<link> ether 52:54:00:1f:51:fb txqueuelen 1000 (Ethernet) RX packets 1328682 bytes 1981399747 (1.8 GiB) RX errors 444 dropped 0 overruns 0 frame 444 TX packets 399465 bytes 28981363 (27.6 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 enp2s2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 fe80::5054:ff:fe30:f2cb prefixlen 64 scopeid 0x20<link> ether 52:54:00:30:f2:cb txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 517 bytes 161254 (157.4 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 eth1000: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 fe80::5054:ff:fe0d:8c00 prefixlen 64 scopeid 0x20<link> ether 52:54:00:0d:8c:00 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 544 bytes 158549 (154.8 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 eth1001: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 fe80::5054:ff:fe91:cf78 prefixlen 64 scopeid 0x20<link> ether 52:54:00:91:cf:78 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 507 bytes 158767 (155.0 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 Any inputs on how to resolve this? Thanks, Babu