Hi Joseph and all, So far, OpenStack can be deployed successfully in my ipv6 simplex setup! I have fixed the intermittent issue I mentioned below. Need to increase process from 1 to 5 for wsgi_keystone! 2 related patches under review, test pass on both ipv4 and ipv6 simplex setup. https://review.opendev.org/714894 https://review.opendev.org/714898 Appreciate for your comment! Thanks! Zhipeng From: Liu, ZhipengS <zhipengs.liu@intel.com> Sent: 2020年3月26日 9:39 To: Richard, Joseph <Joseph.Richard@windriver.com> Cc: starlingx-discuss@lists.starlingx.io Subject: Re: [Starlingx-discuss] IPv6 issue when apply OpenStack on IPv6 simplex. But this place has already been changed in my patch https://review.opendev.org/714894 Zhipeng From: Richard, Joseph <Joseph.Richard@windriver.com<mailto:Joseph.Richard@windriver.com>> Sent: 2020年3月25日 22:08 To: Liu, ZhipengS <zhipengs.liu@intel.com<mailto:zhipengs.liu@intel.com>> Cc: starlingx-discuss@lists.starlingx.io<mailto:starlingx-discuss@lists.starlingx.io> Subject: Re: [Starlingx-discuss] IPv6 issue when apply OpenStack on IPv6 simplex. I see at least one place [1] where keystone is configured to listen on 0.0.0.0, so that's probably why. [1] https://github.com/openstack/openstack-helm/blob/master/keystone/values.yaml... ________________________________ From: Liu, ZhipengS <zhipengs.liu@intel.com<mailto:zhipengs.liu@intel.com>> Sent: Wednesday, March 25, 2020 5:19 AM To: Richard, Joseph <Joseph.Richard@windriver.com<mailto:Joseph.Richard@windriver.com>> Cc: starlingx-discuss@lists.starlingx.io<mailto:starlingx-discuss@lists.starlingx.io> <starlingx-discuss@lists.starlingx.io<mailto:starlingx-discuss@lists.starlingx.io>> Subject: RE: [Starlingx-discuss] IPv6 issue when apply OpenStack on IPv6 simplex. Hi Josesh, I have added 2 more patches for your review. https://review.opendev.org/714894 https://review.opendev.org/714898 So far, it can deploy services until heat. But I still have an intermittent issue that ***-ks-user jobs always need restart several times to get task finished. Sometimes, it may cause endpoint job failure and block deployment procedure. Log looks like below, still not find the root cause. Could you help on this point? Thanks! Failed to discover available identity versions when contacting http://keystone-api.openstack.svc.cluster.local:5000/v3. Attempting to parse version from URL. Unable to establish connection to http://keystone-api.openstack.svc.cluster.local:5000/v3/auth/tokens: HTTPConnectionPool(host='keystone-api.openstack.svc.cluster.local', port=5000): Max retries exceeded with url: /v3/auth/tokens (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f857a551250>: Failed to establish a new connection: [Errno 101] Network is unreachable',)) Thanks! Zhipeng From: Liu, ZhipengS Sent: 2020年3月23日 21:50 To: 'Richard, Joseph' <Joseph.Richard@windriver.com<mailto:Joseph.Richard@windriver.com>> Cc: 'starlingx-discuss@lists.starlingx.io' <starlingx-discuss@lists.starlingx.io<mailto:starlingx-discuss@lists.starlingx.io>> Subject: RE: [Starlingx-discuss] IPv6 issue when apply OpenStack on IPv6 simplex. Hi Joseph, I have updated my 2 patches, both tested on ipv4 and ipv6 setup. https://review.opendev.org/#/c/714034/ https://review.opendev.org/#/c/714038/ But still failed when deploy keystone, glance, cinder later. Common failure causes are found that need to bind host to :: instead of 0.0.0.0. Otherwise, it will only bind port to ipv4 address, which causes db connect failure or pod probe failure. After below changes, it can run until deploying cinder. 1)Change mariadb value.yaml conf: bind adress from 0.0.0.0 to :: 2) Change keystone value.yaml wsgi_keystone: | {{- $portInt := tuple "identity" "internal" "api" $ | include "helm-toolkit.endpoints.endpoint_port_lookup" }} Listen 0.0.0.0:{{ $portInt }} change to Listen :::{{ $portInt }} 3) Change glance value.yaml Conf.Default: add bind_host = "::" I have to check these services deploy one by one. Thanks! Zhipeng