Hi Chenjie,
I spoke with Joseph. We don’t believe you need to make any puppet changes to test qos.
Storyboard https://storyboard.openstack.org/#!/story/2003948
(which you already noted below) removed the STX/WR custom QoS extensions, so StarlingX is now aligned with the upstream neutron behavior.
I have added Chris Winnicki to this email thread. He recently verified QoS functionality in StarlingX after the above Story was merged. He can provide you with the steps. Chris is away today, but should be able
to respond tomorrow.
Regards,
Ghada
From: Xu, Chenjie [mailto:chenjie.xu@intel.com]
Sent: Tuesday, March 05, 2019 8:54 AM
To: Richard, Joseph; Khalil, Ghada; Peters, Matt
Cc: starlingx-discuss@lists.starlingx.io; Lin, Shuicheng; Martinez Monroy, Elio; Zhao, Forrest; Xie, Cindy; Cabrales, Ada; Jones, Bruce E; Qin, Kailun; Guo, Ruijing; Le, Huifeng
Subject: RE: [Starlingx-discuss] OVS-DPDK Upgrade Testing
Hi Joseph,
About the configuration of QOS, I don’t know which puppet file should be modified to add the following configuration into the file /etc/neutron/plugins/ml2/openvswitch.ini:
extensions = qos
Could you please tell which puppet file I should modify?
Best Regards,
Xu, Chenjie
From: Xu, Chenjie
Sent: Monday, March 4, 2019 11:39 PM
To: 'Richard, Joseph' <Joseph.Richard@windriver.com>; 'Ghada.Khalil@windriver.com' <Ghada.Khalil@windriver.com>; 'Peters, Matt' <Matt.Peters@windriver.com>
Cc: starlingx-discuss@lists.starlingx.io; Lin, Shuicheng <shuicheng.lin@intel.com>; Martinez Monroy, Elio <elio.martinez.monroy@intel.com>;
Zhao, Forrest <forrest.zhao@intel.com>; Xie, Cindy <cindy.xie@intel.com>; Cabrales, Ada <ada.cabrales@intel.com>; Jones, Bruce
E <bruce.e.jones@intel.com>; Qin, Kailun <kailun.qin@intel.com>; Guo, Ruijing <ruijing.guo@intel.com>; Le, Huifeng <huifeng.le@intel.com>
Subject: FW: [Starlingx-discuss] OVS-DPDK Upgrade Testing
Hi Joseph,
For the following bug sent on last Friday:
system host-port-list compute-1
'pdevice'
I attached the /var/log/sysinv.log of controller-0 and compute-1. According to the logs, the compute-1 is not correctly installed.
Could you please take a look at the logs and provide some comments?
Best Regards,
Xu, Chenjie
From: Xu, Chenjie
Sent: Monday, March 4, 2019 10:08 PM
To: Richard, Joseph <Joseph.Richard@windriver.com>;
Ghada.Khalil@windriver.com; Peters, Matt <Matt.Peters@windriver.com>
Cc: starlingx-discuss@lists.starlingx.io; Lin, Shuicheng <shuicheng.lin@intel.com>; Martinez Monroy, Elio <elio.martinez.monroy@intel.com>;
Zhao, Forrest <forrest.zhao@intel.com>; Xie, Cindy <cindy.xie@intel.com>; Cabrales, Ada <ada.cabrales@intel.com>; Jones, Bruce
E <bruce.e.jones@intel.com>; Qin, Kailun <kailun.qin@intel.com>; Guo, Ruijing <ruijing.guo@intel.com>; Le, Huifeng <huifeng.le@intel.com>
Subject: RE: [Starlingx-discuss] OVS-DPDK Upgrade Testing
Hi Joseph,
Thank you for your reply! For now I’m trying to configure QOS in StarlingX by changing puppet to change neutron configuration files.
But I think this is not a good way to configure QOS in StarlingX.
Could you please provide some guide on how to configure QOS in StarlingX? I noticed that the StarlingX custom QOS extension has been removed. (https://storyboard.openstack.org/#!/story/2003948)
Best Regards,
Xu, Chenjie
From: Richard, Joseph [mailto:Joseph.Richard@windriver.com]
Sent: Saturday, March 2, 2019 12:41 AM
To: Xu, Chenjie <chenjie.xu@intel.com>; Khalil, Ghada <Ghada.Khalil@windriver.com>; Peters, Matt <Matt.Peters@windriver.com>
Cc: starlingx-discuss@lists.starlingx.io; Lin, Shuicheng <shuicheng.lin@intel.com>; Martinez Monroy, Elio <elio.martinez.monroy@intel.com>;
Zhao, Forrest <forrest.zhao@intel.com>; Xie, Cindy <cindy.xie@intel.com>; Cabrales, Ada <ada.cabrales@intel.com>; Jones, Bruce
E <bruce.e.jones@intel.com>; Qin, Kailun <kailun.qin@intel.com>; Guo, Ruijing <ruijing.guo@intel.com>; Le, Huifeng <huifeng.le@intel.com>
Subject: RE: [Starlingx-discuss] OVS-DPDK Upgrade Testing
1:
You need to use sysinv to add the address, not add it using ip commands.
usage: system host-addr-add <hostname or id> <interface name or id> <ipv4/ipv6
address> <prefix length>
2:
Check in /var/log/sysinv.log for the traceback at that time.
From: Xu, Chenjie [mailto:chenjie.xu@intel.com]
Sent: Friday, March 1, 2019 9:55 AM
To: Richard, Joseph; Khalil, Ghada; Peters, Matt
Cc: starlingx-discuss@lists.starlingx.io;
Lin, Shuicheng; Martinez Monroy, Elio; Zhao, Forrest; Xie, Cindy; Cabrales, Ada; Jones, Bruce E; Qin, Kailun; Guo, Ruijing; Le, Huifeng
Subject: [Starlingx-discuss] OVS-DPDK Upgrade Testing
Hi Joseph,
I’m responsible for the Basic Functional Testing for OVS-DPDK Upgrade. I have set up a StarlingX multimode environment (1 controller and 2 computes) using the ISO image
for OVS/DPDK upgrade test. I have
2 questions for you:
1. I don’t know how associate a vxlan providernet with compute node.
Could you please provide the steps how to associate a vxlan providernet with compute node? The commands I use are following:
neutron providernet-create tenant_vxlan --type=vxlan --mtu=1400
neutron providernet-range-create --name tenant_vxlan-a-range1 --range 100-400 --group 224.0.0.1 --ttl 255 tenant_vxlan
system datanetwork-add tenant_vxlan vxlan --multicast_group 224.0.0.1 --ttl 255 --port_num 4789
system host-if-modify -p tenant_vxlan -c data compute-0 enp4s0f1
system host-unlock compute-0
After executing “system host-unlock compute-0”, it will report “Interface enp4s0f1 is associated to VXLAN data network tenant_vxlan which requires an IPv4 address”.
But I do allocate a IP address for enp4s0f1. You can check the attached images.
2. I have found one bug and will investigate it. If you have any ideas please let me know. After installing the compute-1, I try to list the interface on compute-1 by following command:
system host-port-list compute-1
'pdevice'
The normal output should be:
system host-port-list compute-0
+--------------------------------------+----------+----------+--------------+--------+-----------+-------------+------------------------------------------------+
| uuid | name | type | pci address | device | processor | accelerated | device type
|
+--------------------------------------+----------+----------+--------------+--------+-----------+-------------+------------------------------------------------+
| e072d576-90a6-4040-87df-66a913076df0 | eno1 | ethernet | 0000:07:00.0 | 0 | 0 | True
| I350 Gigabit Network Connection |
| 485b6e35-5b75-4b73-93dc-7deae0fb5c5c | eno2 | ethernet | 0000:07:00.1 | 0 | 0 | True
| I350 Gigabit Network Connection |
| 8b448ab6-e9df-4ce7-84a4-256d97f6fd5b | enp4s0f0 | ethernet | 0000:04:00.0 | 0 | 0 | True | 82599ES 10-Gigabit SFI/SFP+
Network Connection |
| 6d5b1ce7-ae76-4781-9e51-93bfe8417dc0 | enp4s0f1 | ethernet | 0000:04:00.1 | 0 | 0 | True | 82599ES 10-Gigabit SFI/SFP+
Network Connection |
+--------------------------------------+----------+----------+--------------+--------+-----------+-------------+------------------------------------------------+
Best Regards,
Xu, Chenjie
From: Xu, Chenjie
Sent: Friday, March 1, 2019 2:32 PM
To: Lin, Shuicheng <shuicheng.lin@intel.com>
Cc: Martinez Monroy, Elio <elio.martinez.monroy@intel.com>; Zhao, Forrest <forrest.zhao@intel.com>; Xie, Cindy <cindy.xie@intel.com>;
Cabrales, Ada <ada.cabrales@intel.com>; Jones, Bruce E <bruce.e.jones@intel.com>; Qin, Kailun <kailun.qin@intel.com>; Guo, Ruijing
<ruijing.guo@intel.com>; Le, Huifeng <huifeng.le@intel.com>
Subject: RE: ISO image for OVS/DPDK upgrade
Hi Shuicheng,
Thank you for your information! I will start to do the Basic Functional Test.
Best Regards,
Xu, Chenjie
From: Lin, Shuicheng
Sent: Friday, March 1, 2019 2:03 PM
To: Xu, Chenjie <chenjie.xu@intel.com>; Martinez Monroy, Elio <elio.martinez.monroy@intel.com>
Cc: Zhao, Forrest <forrest.zhao@intel.com>; Xie, Cindy <cindy.xie@intel.com>; Cabrales, Ada <ada.cabrales@intel.com>; Jones,
Bruce E <bruce.e.jones@intel.com>; Qin, Kailun <kailun.qin@intel.com>; Guo, Ruijing <ruijing.guo@intel.com>
Subject: ISO image for OVS/DPDK upgrade
Hi Chenjie/Elio,
Here is the ISO image for OVS/DPDK upgrade test.
I have done basic deploy test, and could ping VM from each other successfully.
Please help have a try with it, and notify me if there is any issue.
It is built with recent code of centos76 feature branch.
ec@10.239.154.150:/home/ec/bootimage_ovs.iso
scp passwd: 1
Here is the patch list for the upgrade in case you want to have a check:
https://review.openstack.org/640244
https://review.openstack.org/640245
Best Regards
Shuicheng