On 2024-05-20 19:47, vivekanandan.rajendran.devops@tag.ooo wrote:
On 2024-05-20 18:18, vivekanandan.rajendran.devops@tag.ooo wrote:
Hi, I am unable to unlock controller-0 after doing the ansible playbook and following the steps.
OAM_IF=enp2s1 system host-if-modify controller-0 $OAM_IF -c platform system interface-network-assign controller-0 $OAM_IF oam
[sysadmin@localhost ~(keystone_admin)]$ system host-unlock controller-0 Cannot unlock host controller-0 when management interface is configured on a virtual interface. [sysadmin@localhost ~(keystone_admin)]$
am I doing something wrong , following are interfaces. which one I have to assign correctly. Please advise me. Thanks -Vivek
[sysadmin@localhost ~(keystone_admin)]$ ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet 192.168.204.2/24 brd 192.168.204.255 scope host lo:1 valid_lft forever preferred_lft forever inet 192.168.206.2/24 brd 192.168.206.255 scope host lo:5 valid_lft forever preferred_lft forever inet 169.254.202.1/24 scope host lo valid_lft forever preferred_lft forever inet 192.168.204.1/24 scope host secondary lo valid_lft forever preferred_lft forever inet 192.168.206.1/24 scope host secondary lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: enp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 52:54:00:7e:37:6c brd ff:ff:ff:ff:ff:ff inet6 fe80::5054:ff:fe7e:376c/64 scope link valid_lft forever preferred_lft forever 3: enp4s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 52:54:00:42:87:a0 brd ff:ff:ff:ff:ff:ff inet6 fe80::5054:ff:fe42:87a0/64 scope link valid_lft forever preferred_lft forever 4: enp2s1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 52:54:00:4b:d8:f6 brd ff:ff:ff:ff:ff:ff inet 10.10.10.2/24 scope global enp2s1 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe4b:d8f6/64 scope link valid_lft forever preferred_lft forever 5: enp2s2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 52:54:00:69:38:80 brd ff:ff:ff:ff:ff:ff inet6 fe80::5054:ff:fe69:3880/64 scope link valid_lft forever preferred_lft forever Hi All, Please advise me how to proceed with this simplex-aio-controller
On 2024-05-20 17:13, vivekanandan.rajendran.devops@tag.ooo wrote: libvirtd install. Thanks -Vivek Hi , I think i did not put system_mode: simplex in default.yml Thanks -Vivek I have made this as simplex still its showing duplex
+----------------------+--------------------------------------+ | Property | Value | +----------------------+--------------------------------------+ | contact | None | | created_at | 2024-05-20T20:05:28.358244+00:00 | | description | None | | https_enabled | False | | latitude | None | | location | None | | longitude | None | | name | a825dad3-1091-4e2d-b14f-5f893c144239 | | region_name | RegionOne | | sdn_enabled | False | | security_feature | spectre_meltdown_v1 | | service_project_name | services | | software_version | 24.03 | | system_mode | duplex | | system_type | Standard | | timezone | UTC | | updated_at | 2024-05-20T20:06:00.589379+00:00 | | uuid | 37d64366-c546-45ed-8fa9-4bd2fab0c011 | | vswitch_type | none | +----------------------+--------------------------------------+ [sysadmin@localhost ~(keystone_admin)]$ Can anyone please help? Thanks -Vivek