Hi folks,

I was installing StarlingX in a NUC with 2 NVME disks (without other HD or SATA disks), and the installation was ended up with an issue as follows:

“ERROR: Specified installation (sda) or boot (sda) device is a USB drive.”

It seemed NVME disk was not recognized as valid boot disk.

With the help from @Saul, we found in “bsp-files/grub.cfg”, “boot_device” and “rootfs_device” were by default set as “sda” in ks cmdline:

linuxefi /vmlinuz inst.ks=hd:LABEL=oe_iso_boot:/smallsystem_ks.cfg boot_device=sda rootfs_device=sda biosdevname=0 usbcore.autosuspend=-1 console=tty0 inst.text inst.stage2=hd:LABEL=oe_iso_boot inst.gpt security_profile=standard user_namespace.enable=1

So, there are 2 ways to make NVME disks work as boot disk:

1. to change the grub cmdline, with “nvme0n1” for “rootfs_device” and “boot_device” accordingly, during the installation.
2. Not to set “rootfs_device” and “boot_device” in ks cmdline, and let “bsp-files/kickstarts/pre_disk_setup_common.cfg” detect “nvme0n1” dynamically.

Though, I wonder if there are other better ways in such a case.

Regards,

Yong