Hi Scott,

Thanks for the reply. I found out the mistake I had done. The tools project used to create the base container image was of master and I synched the code of stx3.0 inside container.

Hence, there were errors as said before. After resolving this, everything is going on good.

Best Regards,

Poornima

From: Scott Little <scott.little@windriver.com>
Sent: Tuesday, June 23, 2020 6:51 PM
To: N, Poornima Y <poornima.y.n@intel.com>; starlingx-discuss@lists.starlingx.io
Subject: Re: [Starlingx-discuss] Build error in stx 3.0

I can't reproduce your issue.  The basic sequence ...

  repo init

  repo sync

  download_mirrors.sh ...

  check logs/*missing*

  generate-cgcs-centos-repo.sh ...

works for me.

On 2020-06-18 12:38 a.m., N, Poornima Y wrote:

Hi Scott,

Yes, MY_REPO_ROOT_DIR is pointing to the right directory.

Below is the output for echo $MY_REPO_ROOT_DIR with username as pyn:

/localdisk/designer/pyn/stx

Thanks,

Poornima

From: Scott Little <scott.little@windriver.com>
Sent: Thursday, June 18, 2020 8:42 AM
To: starlingx-discuss@lists.starlingx.io
Subject: Re: [Starlingx-discuss] Build error in stx 3.0

Is your MY_REPO_ROOT_DIR environment variable pointing to the right place ?

generate-cgcs-centos-repo.sh should be creating a repo based on the content of $MY_REPO_ROOT_DIR/stx-tools/centos-mirror-tools/rpms_centos.lst .

Scott

On 2020-06-17 8:47 p.m., N, Poornima Y wrote:

Hi all,

I’m facing build issue on StarlingX 3.0. Below are the steps

I have sync the code using below repo command:

repo init -u https://opendev.org/starlingx/manifest -m default.xml -b r/stx.3.0

I get Missing targets for below src, when give the command generate-cgcs-centos-repo.sh /import/mirrors/CentOS/stx-r1/CentOS/pike/:

Missing targets:

ntp-4.2.6p5-28.el7.centos.src.rpm

systemd-219-62.el7_6.5.src.rpm

When I  look into stx-tools/centos-mirror-tools/rpms_centos.lst file, the following src are mentioned:

systemd-219-67.el7.src.rpm

ntp-4.2.6p5-29.el7.centos.src.rpm

Notice that, there is a mismatch in the version!

If I proceed with build-pkgs following is the error I get:

17:30:55 ============ Build failed =============
17:30:55 b5: ERROR: build_dir (417): Invalid srpm path 'mirror:Source/systemd-219-67.el7.src.rpm', evaluated as '/localdisk/designer/pyn/stx/cgcs-root/cgcs-centos-repo/Source/systemd-219-67.el7.src.rpm', found in '/localdisk/designer/pyn/stx/cgcs-root/stx/integ/base/systemd/centos/srpm_path'
17:30:55 ERROR: reaper (1304): Failed to build src.rpm from source at 'b5'
17:30:55

Can anyone point me as to how to resolve this error?. Am I missing anything?

Thanks and Regards,

Poornima Y N

_______________________________________________
Starlingx-discuss mailing list
Starlingx-discuss@lists.starlingx.io
http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss