Your error is referring to the management interface, but you’ve included your oam interface config for reference.

From: Babu R <babu.r@hotmail.com>
Sent: Thursday, April 15, 2021 3:40 AM
To: starlingx-discuss@lists.starlingx.io
Subject: [Starlingx-discuss] Error while installing simplex virtual AIO-SX

[Please note: This e-mail is from an EXTERNAL e-mail address]

I’m getting error while trying to install the virtual AIO-SX. I have installed the ansible playbook

ansible-playbook /usr/share/ansible/stx-ansible/playbooks/bootstrap.yml

Ran these commands

source /etc/platform/openrc

OAM_IF=enp2s1

system host-if-modify controller-0 $OAM_IF -c platform

system interface-network-assign controller-0 $OAM_IF oam

system ntp-modify ntpservers=0.pool.ntp.org,1.pool.ntp.org

[root@localhost ~(keystone_admin)]# system host-unlock controller-0

Cannot unlock host controller-0 when management interface is configured on a virtual interface

$OAM_IF oamost ~(keystone_admin)]# system interface-network-assign controller-0

+--------------+--------------------------------------+

| Property     | Value                                |

+--------------+--------------------------------------+

| hostname     | controller-0                         |

| uuid         | da172ef6-6e46-4ca2-a81f-93d482e79814 |

| ifname       | enp2s1                               |

| network_name | oam                                  |

+--------------+--------------------------------------+

enp2s1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500

        inet 10.10.10.3  netmask 255.255.255.0  broadcast 0.0.0.0

        inet6 fe80::5054:ff:fe1f:51fb  prefixlen 64  scopeid 0x20<link>

        ether 52:54:00:1f:51:fb  txqueuelen 1000  (Ethernet)

        RX packets 1328682  bytes 1981399747 (1.8 GiB)

        RX errors 444  dropped 0  overruns 0  frame 444

        TX packets 399465  bytes 28981363 (27.6 MiB)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

enp2s2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500

        inet6 fe80::5054:ff:fe30:f2cb  prefixlen 64  scopeid 0x20<link>

        ether 52:54:00:30:f2:cb  txqueuelen 1000  (Ethernet)

        RX packets 0  bytes 0 (0.0 B)

        RX errors 0  dropped 0  overruns 0  frame 0

        TX packets 517  bytes 161254 (157.4 KiB)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

eth1000: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500

        inet6 fe80::5054:ff:fe0d:8c00  prefixlen 64  scopeid 0x20<link>

        ether 52:54:00:0d:8c:00  txqueuelen 1000  (Ethernet)

        RX packets 0  bytes 0 (0.0 B)

        RX errors 0  dropped 0  overruns 0  frame 0

        TX packets 544  bytes 158549 (154.8 KiB)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

eth1001: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500

        inet6 fe80::5054:ff:fe91:cf78  prefixlen 64  scopeid 0x20<link>

        ether 52:54:00:91:cf:78  txqueuelen 1000  (Ethernet)

        RX packets 0  bytes 0 (0.0 B)

        RX errors 0  dropped 0  overruns 0  frame 0

        TX packets 507  bytes 158767 (155.0 KiB)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0                        

Any inputs on how to resolve this?

Thanks,

Babu