I tried to config oam/mgmt. for duplex/standard after ansible, and the controller1 and other nodes can be installed now.
But we still met issue when doing “system application-upload” because we have to use private registry in SH, but private registry is not successfully configed by ansible, please check this LP:
https://bugs.launchpad.net/starlingx/+bug/1830319
Thanks!
Yan
Thanks!
I will try.
Yan
From: Poncea, Ovidiu [mailto:Ovidiu.Poncea@windriver.com]
Sent: Thursday, May 23, 2019 18:21
To: Chen, Yan <yan.chen@intel.com>;
starlingx-discuss@lists.starlingx.io
Subject: RE: ansible deployment for duplex/standard
On controller-0 you need to delete the loopback interface and then configure the other nets on ctrl-0 with something like:
system host-if-modify controller-0 lo -c none
system host-if-modify controller-0 enp0s3 -c platform --networks oam
system host-if-modify controller-0 enp0s8 -c platform --networks mgmt
system host-if-modify controller-0 enp0s8 -c platform --networks cluster-host
system host-addr-list controller-0
The rest of the process is identical on the other nodes.
Ovidiu
From: Chen, Yan [yan.chen@intel.com]
Sent: Wednesday, May 22, 2019 10:12 AM
To: starlingx-discuss@lists.starlingx.io
Subject: [Starlingx-discuss] ansible deployment for duplex/standard
Hi
I wonder if anyone can help me on the ansible deployment for duplex/standard.
I installed ISO (about 0519) on vms and run ansible with my yml file as below, but the 2nd controller failed to be installed via pxe.
After checked controller0, I found that mgmt network is configured to lo.
But use “config_controller --force" everything’s ok.
Am I doing anything wrong with the yml file?
There’s no instruction on WIKI for duplex + ansible yet. (?)
---
system_mode: duplex
management_subnet: 192.178.204.0/28
external_oam_subnet: 10.10.10.0/24
external_oam_gateway_address: 10.10.10.1
external_oam_floating_address: 10.10.10.2
external_oam_node_0_address: 10.10.10.3
external_oam_node_1_address: 10.10.10.4
Yan