Hi Giuseppe Some questions. Do you have the serial port enabled in the bios? Do you have a telnet session/connection your DL380 machine? Have you tried to select "Graphical install" ? Note: If you select "Serial console" install and are monitoring the graphical terminal then you will indeed see a "black screen" because the output goes to the serial console. Chris Winnicki chris.winnicki@windriver.com 613-963-1329 ________________________________ From: Giuseppe Sannino [km.giuseppesannino@gmail.com] Sent: Tuesday, January 07, 2020 4:42 AM To: starlingx-discuss@lists.starlingx.io Subject: [Starlingx-discuss] Baremetal installation problem Hi all, I have an HP ProLiant DL380 Gen10 and the idea is to install STX 3.0 Baremetal All-In-One Controller Configuration". I downloaded the ISO from here: http://mirror.starlingx.cengn.ca/mirror/starlingx/release/3.0.0/centos/outpu... I linked as Virtual Drive through the HP iLo and then booted from it. I'm able to see the "Select kernel options and boot kernel". Here I picked the "UEFI All-in-Hone Controller Configuratation" option. Then "Serial console". After that, basically I can just see a black screen with nothing going on. I can't see the installation going through. I tried with the 3.0.0 iso also on Virtualbox and on an Openstack data center, same result. Furthermore, the same happens using the 2.0 image. What am i doing wrong ? Thanks for your help /Giuseppe