Hi Joseph,
About the configuration of QOS, I don’t know which puppet file should be modified to add the following configuration into the file /etc/neutron/plugins/ml2/openvswitch.ini:
extensions = qos

Could you please tell which puppet file I should modify?

Best Regards,

Xu, Chenjie

From: Xu, Chenjie
Sent: Monday, March 4, 2019 11:39 PM
To: 'Richard, Joseph' <Joseph.Richard@windriver.com>; 'Ghada.Khalil@windriver.com' <Ghada.Khalil@windriver.com>; 'Peters, Matt' <Matt.Peters@windriver.com>
Cc: starlingx-discuss@lists.starlingx.io; Lin, Shuicheng <shuicheng.lin@intel.com>; Martinez Monroy, Elio <elio.martinez.monroy@intel.com>; Zhao, Forrest <forrest.zhao@intel.com>; Xie, Cindy <cindy.xie@intel.com>; Cabrales, Ada <ada.cabrales@intel.com>; Jones, Bruce E <bruce.e.jones@intel.com>; Qin, Kailun <kailun.qin@intel.com>; Guo, Ruijing <ruijing.guo@intel.com>; Le, Huifeng <huifeng.le@intel.com>
Subject: FW: [Starlingx-discuss] OVS-DPDK Upgrade Testing

Hi Joseph,

For the following bug sent on last Friday:

system host-port-list compute-1
'pdevice'

I attached the /var/log/sysinv.log of controller-0 and compute-1. According to the logs, the compute-1 is not correctly installed. Could you please take a look at the logs and provide some comments?

Best Regards,

Xu, Chenjie

From: Xu, Chenjie
Sent: Monday, March 4, 2019 10:08 PM
To: Richard, Joseph <Joseph.Richard@windriver.com>; Ghada.Khalil@windriver.com; Peters, Matt <Matt.Peters@windriver.com>
Cc: starlingx-discuss@lists.starlingx.io; Lin, Shuicheng <shuicheng.lin@intel.com>; Martinez Monroy, Elio <elio.martinez.monroy@intel.com>; Zhao, Forrest <forrest.zhao@intel.com>; Xie, Cindy <cindy.xie@intel.com>; Cabrales, Ada <ada.cabrales@intel.com>; Jones, Bruce E <bruce.e.jones@intel.com>; Qin, Kailun <kailun.qin@intel.com>; Guo, Ruijing <ruijing.guo@intel.com>; Le, Huifeng <huifeng.le@intel.com>
Subject: RE: [Starlingx-discuss] OVS-DPDK Upgrade Testing

Hi Joseph,

Thank you for your reply! For now I’m trying to configure QOS in StarlingX by changing puppet to change neutron configuration files. But I think this is not a good way to configure QOS in StarlingX. Could you please provide some guide on how to configure QOS in StarlingX? I noticed that the StarlingX custom QOS extension has been removed. (https://storyboard.openstack.org/#!/story/2003948)

Best Regards,

Xu, Chenjie

From: Richard, Joseph [mailto:Joseph.Richard@windriver.com]
Sent: Saturday, March 2, 2019 12:41 AM
To: Xu, Chenjie <chenjie.xu@intel.com>; Khalil, Ghada <Ghada.Khalil@windriver.com>; Peters, Matt <Matt.Peters@windriver.com>
Cc: starlingx-discuss@lists.starlingx.io; Lin, Shuicheng <shuicheng.lin@intel.com>; Martinez Monroy, Elio <elio.martinez.monroy@intel.com>; Zhao, Forrest <forrest.zhao@intel.com>; Xie, Cindy <cindy.xie@intel.com>; Cabrales, Ada <ada.cabrales@intel.com>; Jones, Bruce E <bruce.e.jones@intel.com>; Qin, Kailun <kailun.qin@intel.com>; Guo, Ruijing <ruijing.guo@intel.com>; Le, Huifeng <huifeng.le@intel.com>
Subject: RE: [Starlingx-discuss] OVS-DPDK Upgrade Testing

You need to use sysinv to add the address, not add it using ip commands.

usage: system host-addr-add <hostname or id> <interface name or id> <ipv4/ipv6

address> <prefix length>

Check in /var/log/sysinv.log for the traceback at that time.

From: Xu, Chenjie [mailto:chenjie.xu@intel.com]
Sent: Friday, March 1, 2019 9:55 AM
To: Richard, Joseph; Khalil, Ghada; Peters, Matt
Cc: starlingx-discuss@lists.starlingx.io; Lin, Shuicheng; Martinez Monroy, Elio; Zhao, Forrest; Xie, Cindy; Cabrales, Ada; Jones, Bruce E; Qin, Kailun; Guo, Ruijing; Le, Huifeng
Subject: [Starlingx-discuss] OVS-DPDK Upgrade Testing

Hi Joseph,

I’m responsible for the Basic Functional Testing for OVS-DPDK Upgrade. I have set up a StarlingX multimode environment (1 controller and 2 computes) using the ISO image for OVS/DPDK upgrade test. I have 2 questions for you:

1. I don’t know how associate a vxlan providernet with compute node. Could you please provide the steps how to associate a vxlan providernet with compute node? The commands I use are following:
neutron providernet-create tenant_vxlan --type=vxlan --mtu=1400

neutron providernet-range-create --name tenant_vxlan-a-range1 --range 100-400 --group 224.0.0.1 --ttl 255 tenant_vxlan

system datanetwork-add tenant_vxlan vxlan --multicast_group 224.0.0.1 --ttl 255 --port_num 4789

system host-if-modify -p tenant_vxlan -c data compute-0 enp4s0f1

system host-unlock compute-0

After executing “system host-unlock compute-0”, it will report “Interface enp4s0f1 is associated to VXLAN data network tenant_vxlan which requires an IPv4 address”. But I do allocate a IP address for enp4s0f1. You can check the attached images.

2. I have found one bug and will investigate it. If you have any ideas please let me know. After installing the compute-1, I try to list the interface on compute-1 by following command:

system host-port-list compute-1
'pdevice'

The normal output should be:
system host-port-list compute-0
+--------------------------------------+----------+----------+--------------+--------+-----------+-------------+------------------------------------------------+

+--------------------------------------+----------+----------+--------------+--------+-----------+-------------+------------------------------------------------+

| e072d576-90a6-4040-87df-66a913076df0 | eno1 | ethernet | 0000:07:00.0 | 0 | 0 | True | I350 Gigabit Network Connection |

| 485b6e35-5b75-4b73-93dc-7deae0fb5c5c | eno2 | ethernet | 0000:07:00.1 | 0 | 0 | True | I350 Gigabit Network Connection |

+--------------------------------------+----------+----------+--------------+--------+-----------+-------------+------------------------------------------------+

Best Regards,

Xu, Chenjie

From: Xu, Chenjie
Sent: Friday, March 1, 2019 2:32 PM
To: Lin, Shuicheng <shuicheng.lin@intel.com>
Cc: Martinez Monroy, Elio <elio.martinez.monroy@intel.com>; Zhao, Forrest <forrest.zhao@intel.com>; Xie, Cindy <cindy.xie@intel.com>; Cabrales, Ada <ada.cabrales@intel.com>; Jones, Bruce E <bruce.e.jones@intel.com>; Qin, Kailun <kailun.qin@intel.com>; Guo, Ruijing <ruijing.guo@intel.com>; Le, Huifeng <huifeng.le@intel.com>
Subject: RE: ISO image for OVS/DPDK upgrade

Hi Shuicheng,

Thank you for your information! I will start to do the Basic Functional Test.

Best Regards,

Xu, Chenjie

From: Lin, Shuicheng
Sent: Friday, March 1, 2019 2:03 PM
To: Xu, Chenjie <chenjie.xu@intel.com>; Martinez Monroy, Elio <elio.martinez.monroy@intel.com>
Cc: Zhao, Forrest <forrest.zhao@intel.com>; Xie, Cindy <cindy.xie@intel.com>; Cabrales, Ada <ada.cabrales@intel.com>; Jones, Bruce E <bruce.e.jones@intel.com>; Qin, Kailun <kailun.qin@intel.com>; Guo, Ruijing <ruijing.guo@intel.com>
Subject: ISO image for OVS/DPDK upgrade

Hi Chenjie/Elio,

Here is the ISO image for OVS/DPDK upgrade test.

I have done basic deploy test, and could ping VM from each other successfully.

Please help have a try with it, and notify me if there is any issue.

It is built with recent code of centos76 feature branch.

ec@10.239.154.150:/home/ec/bootimage_ovs.iso

scp passwd: 1

Here is the patch list for the upgrade in case you want to have a check:

https://review.openstack.org/640244

https://review.openstack.org/640245

Best Regards

Shuicheng