I’ve downloaded the CENGN ISO from:

http://mirror.starlingx.cengn.ca/mirror/starlingx/master/centos/latest_build/outputs/iso/

and it does not contain the installer patches. However, the installer image here is patched:

http://mirror.starlingx.cengn.ca/mirror/starlingx/master/centos/latest_build/outputs/installer/

We’ll have to look at the build to see what’s going on here.

From: Alonso, Juan Carlos [mailto:juan.carlos.alonso@intel.com]
Sent: Thursday, January 03, 2019 3:18 PM
To: Penney, Don; starlingx
Subject: RE: STX install_state status

Thank You for your help,

I am using the latest ISO from CENGN and has the same issue.

Do you know if there is a Launchpad already open for this issue?

Regards.

Juan Carlos Alonso

From: Penney, Don [mailto:Don.Penney@windriver.com]
Sent: Thursday, January 3, 2019 2:06 PM
To: Alonso, Juan Carlos <juan.carlos.alonso@intel.com>; starlingx <starlingx-discuss@lists.starlingx.io>
Subject: RE: STX install_state status

Please see my reply (attached) to the thread “the install progress information has missing when install computer node , storage node, and new controller node”. In particular, please check that your installer has the required patch. If you’re using a stock CentOS installer image, you will not get the install-state notifications.

Cheers,

Don.

From: Alonso, Juan Carlos [mailto:juan.carlos.alonso@intel.com]
Sent: Thursday, January 03, 2019 3:00 PM
To: starlingx
Subject: [Starlingx-discuss] STX install_state status

Hi,

Do someone have faced an issue with install states status when a new host is added?

During controller, compute or storage host installation:

system host-show controller-1 | grep install

| install_output | text

| install_state | None

| install_state_info | None

During installation several values should be showed as pre-install, installing, completed. At the end of installation the output must be install_state = completed.

Regards.

Juan Carlos Alonso