Hi Yong,

 

Please see the following reference:

https://docs.starlingx.io/installation_guide/index.html#nvme-drive-as-boot-drive

 

Edit the kernel boot parameter. After you are presented with the StarlingX ISO boot options and after you have selected the preferred installation option (e.g. Standard Configuration / All-in-One Controller Configuration), press the TAB key to edit the Kernel boot parameters. Modify the boot_device and rootfs_device from the default sda so that it is the correct device name for the NVMe drive (e.g. “nvme0n1”).

 

Cheers,

Don.

 

From: Hu, Yong [mailto:yong.hu@intel.com]
Sent: Tuesday, March 12, 2019 8:51 AM
To: starlingx-discuss@lists.starlingx.io
Subject: [Starlingx-discuss] about NVME disk as the boot disk

 

Hi folks,

I was installing StarlingX in a NUC with 2 NVME disks (without other HD or SATA disks), and the installation was ended up with an issue as follows:

“ERROR: Specified installation (sda) or boot (sda) device is a USB drive.”

 

It seemed NVME disk was not recognized as valid boot disk.

 

With the help from @Saul, we found in “bsp-files/grub.cfg”, “boot_device” and “rootfs_device” were by default set as “sda” in ks cmdline:

linuxefi /vmlinuz inst.ks=hd:LABEL=oe_iso_boot:/smallsystem_ks.cfg boot_device=sda rootfs_device=sda biosdevname=0 usbcore.autosuspend=-1 console=tty0 inst.text inst.stage2=hd:LABEL=oe_iso_boot inst.gpt security_profile=standard user_namespace.enable=1

 

So, there are 2 ways to make NVME disks work as boot disk:

  1. to change the grub cmdline, with “nvme0n1” for “rootfs_device” and “boot_device” accordingly, during the installation.
  2. Not to set “rootfs_device” and “boot_device” in ks cmdline, and let “bsp-files/kickstarts/pre_disk_setup_common.cfg” detect “nvme0n1” dynamically.

 

Though, I wonder if there are other better ways in such a case.

 

Regards,

Yong