stx-config team, Based in some time spent now within stx-config and with the objective to align our REST API Documentation with our REST APIs, we are kindly requesting your comments for questions "?" under each section [ Section ] [Sub Section] Please assume: - The require X-Auth-Token is in place to authenticate, only URLs might be shown. - StarlingX is configured as Standard Controller: 2 Controllers, 2 Computes. [ Project Information ] The mismatch between documentation [0] and information via API Query is addressed under [3] and [4]. ? Heads Up! The description includes the word "interfaces" however as you will find below, "interfaces is also listed in the documentation but not intuitively found as a REST method under the API query output. More information below. [ v1/ ] Here we are showing 3 different views of what we are seeing within stx-config project: - Our initial "Migration WADL to RST", see history here [1] - What we have documented in our "Current Official API Documentation" pages [0] - What the "API Query Output" is actually showing with curl -i http://10.10.10.2:6385/v1/... [ v1/ ] [ Migration WADL to RST ] Migration analysis from WADL to RST format gave us the REST METHODs below to include, we are adding in the second column what it seems to be the match for the valid API REST methods: System > isystems Clusters > clusters Interfaces > ? Partitions > ! /v1/ihosts/{host_id}/partitions || /v1/partitions/{partition_id} Volume Groups > ! /v1/ihosts/{host_id}/ilvgs || /v1/ilvgs/{volumegroup_id} Physical Volumes > ! /v1/ihosts/{host_id}/ipvs || /v1/ipvs/{physicalvolume_id} Ceph Storage Functions > ! /v1/ihosts/{host_id}/istors || /v1/istors/{stor_id} Profiles > iprofile DNS > idns NTP > intp External OAM > iextoam Infrastructure Subnet > iinfra DRBD Configuration > drbdconfig SNMP Communities > icommunity SNMP Trap Destinations > itrapdest Devices > ! /v1/devices/{device_id} || /v1/ihosts/{host_id}/pci_devices Service Parameter > service_parameter SDN Controllers > sdn_controller Remote Logging > remotelogging Networks > networks Address Pools > addrpools Addresses > addresses Routes > ! /v1/ihosts/{host_id}/routes Storage Backends > storage_backend Storage Tiers > ! storage_tiers Controller Filesystem > controller_fs Ceph Monitors > ceph_mon System Certificate Configuration > ! certificate Custom Firewall Rules > firewallrules ? Are all the names and API REST methods correctly matched? ? Are all the valid API REST method names correct? ? "Interfaces" is listed under v1/ API Version output [2] as an expected service but a REST METHOD match was not found, are we talking about "Interface" one of the following ones: 1) Is it the "interface_networks" REST method? 2) Or found under "Profiles" as described under its description: "...This includes interface profiles..." 3) Or found under "SDN Controllers" as described under its description: "...SDN manager interface..." 4) Or as simple as "Networks" interfaces? [ v1/ ] [ Current Official API Documentation ] The following API REST methods documented under [0] give valid API output: - System - Clusters - DNS - NTP - External OAM - Infrastructure Subnet - DRBD Configuration - SNMP Communities - SNMP Trap Destinations - Service Parameter - SDN Controllers - Remote Logging - Networks - Address Pools - Storage Backends - Storage Tiers - Controller Filesystem - Ceph Monitors - System Certificate Configuration - Custom Firewall Rules - Partitions - Volume Groups - Physical Volumes - Ceph Storage Functions - Devices - Addresses - Routes The following API REST method documented under [0] has an invalid name: - Profiles Documentation pointing to: /v1/iprofiles and a valid v1/ endpoint: http://10.10.10.2:6385/v1/iprofile ? Is this a valid Documentation change from "iprofiles" to "iprofile"? [ v1/ ] [ API Query Output ] Based in our "[Starlingx-discuss] API requests: stx-ha" [3] we learned the following API REST methods from "System Inventory API v1" are assigned to stx-ha: - services - servicenodes - service_groups And in our "[Starlingx-discuss] API requests: stx-metal" [4] the following are assigned to stx-metal: - lldp_neighbours - ihosts - icpu - lldp_agents And now these API REST methods are assigned to stx-config: - isystems - clusters - <Interfaces> - ! /v1/ihosts/{host_id}/partitions || /v1/partitions/{partition_id} - ! /v1/ihosts/{host_id}/ilvgs || /v1/ilvgs/{volumegroup_id} - ! /v1/ihosts/{host_id}/ipvs || /v1/ipvs/{physicalvolume_id} - ! /v1/ihosts/{host_id}/istors || /v1/istors/{stor_id} - iprofile - idns - intp - iextoam - iinfra - drbdconfig - icommunity - itrapdest - ! /v1/devices/{device_id} || /v1/ihosts/{host_id}/pci_devices - service_parameter - sdn_controller - remotelogging - networks - addrpools - addresses - ! /v1/ihosts/{host_id}/routes - storage_backend - ! storage_tiers - controller_fs - ceph_mon - ! certificate - firewallrules Leaving the following assigned to other StarlingX components, more to come once we review the remaining StarlingX projects: - links - storage_file - storage_lvm - interface_networks - id - ptp - media_types - upgrade - imemory - storage_ceph_external - health - license - storage_ceph - storage_external - iuser - helm_charts - inode ? Do we need another level of review? ? Should we target an update to the documentation in terms of number of services we are documenting comparing the 3 perspectives? ? Is there anything we need to take care of? Thanks for your initial support. [0] https://docs.starlingx.io/api-ref/stx-config/index.html [1] https://wiki.openstack.org/wiki/StarlingX/Developer_Guide/API_Documentation#... [2] https://docs.starlingx.io/api-ref/stx-config/api-ref-sysinv-v1-config.html?e... [3]http://lists.starlingx.io/pipermail/starlingx-discuss/2018-November/001868.h... [4] http://lists.starlingx.io/pipermail/starlingx-discuss/2018-November/002032.h...