Hi all, I have double checked my patch below https://review.openstack.org/#/c/623994 No obvious issue found. It just modify ssh_config and sshd_config configuration file in /etc/ssh/ folder through configuration package instead of using source patch to modify this 2 files during build time. I also tried to reproduce this issue in my deployment environment. Before I trigger config_controller, I set ip address 10.10.10.111 for controller Then I tried below 2 commands from my deploy host. Both are OK! It seems ssh can work normally. 1) ssh wrsroot@10.10.10.111 2) scp file wrsroot@10.10.10.111:~/ From the debug log in https://bugs.launchpad.net/starlingx/+bug/1808054 I can see that first ssh to 10.10.10.111 is successful. Then it ssh to 10.10.10.3 and could not connect to it. I'm confused here, why script trigger ssh to 10.10.10.3, which will be configured later during executing config_controller. @JC, could you double check your test script as well? ===========================log markers============================================= 20181211 05:33:57.632 - INFO - Logging into '10.10.10.111 prompt=$:22' as 'wrsroot'. 20181211 05:33:58.784 - INFO - Read output: Last login: Tue Dec 11 11:31:44 2018 from 10.10.10.1 [H[2J WARNING: Unauthorized access to this system is forbidden and will be prosecuted by law. By accessing this system, you agree that your actions may be monitored if unauthorized usage is suspected. localhost:~$ 20181211 05:33:58.806 - INFO - +------ START KW: SSHLibrary.Login [ ${user} | ${password} | delay=${delay} ] 20181211 05:33:58.806 - INFO - Logging into '10.10.10.3 prompt=$:22' as 'wrsroot'. 20181211 05:34:01.804 - FAIL - NoValidConnectionsError: [Errno None] Unable to connect to port 22 on 10.10.10.3 BTW, is there any related issue observed from WR side? Thx! -zhipeng -----Original Message----- From: Saul Wold [mailto:sgw@linux.intel.com] Sent: 2018年12月14日 1:07 To: Xie, Cindy <cindy.xie@intel.com>; starlingx <starlingx-discuss@lists.starlingx.io>; Liu, ZhipengS <zhipengs.liu@intel.com> Subject: Re: [Starlingx-discuss] FW: Sanity Test - ISO 20181212 I am glad to see that our testing is actually finding failures! We need to be a little more proactive on resolving issues such as these, this is the second day that this failure is still occurring. **Zhipeng** Please take a look at this issue and if needed revert the change. Sau! On 12/13/18 7:32 AM, Alonso, Juan Carlos wrote:
Status of the Sanity Test for last CENGN ISO: /bootimage.iso from 2018-Dec-12 /(link <http://mirror.starlingx.cengn.ca/mirror/starlingx/master/centos/20181 212T152535Z/outputs/iso/>)
Sanity Test is executed in a /_Virtual Environment_/
Status: *RED*
**
*Simplex*
Setup 03 TCs [PASS] | 01 TCs [FAIL]
Provisioning 00 TCs [PASS] | 01 TCs [FAIL]
Sanity 00 TCs [PASS] | 18 TCs [FAIL]
TOTAL: [ 03 TCs PASS ] | [ 20 TCs FAIL ]
*Duplex*
Setup 03 TCs [PASS] | 01 TCs [FAIL]
Provisioning 00 TCs [PASS] | 01 TCs [FAIL]
Sanity 00 TCs [PASS] | 19 TCs [FAIL]
TOTAL: [ 03 TCs PASS ] | [ 21 TCs FAIL ]
*Multinode Controller Storage*
Setup 03 TCs [PASS] | 01 TCs [FAIL]
Provisioning 00 TCs [PASS] | 01 TCs [FAIL]
Sanity 00 TCs [PASS] | 19 TCs [FAIL]
TOTAL: [ 03 TCs PASS ] | [ 21 TCs FAIL ]
*Multinode Dedicated Storage*
Setup 03 TCs [PASS] | 01 TCs [FAIL]
Provisioning 00 TCs [PASS] | 01 TCs [FAIL]
Sanity 00 TCs [PASS] | 19 TCs [FAIL]
TOTAL: [ 03 TCs PASS ] | [ 21 TCs FAIL ]
------------------------------------------------------------------
SFTP service still not working.
Launchpad open: https://bugs.launchpad.net/starlingx/+bug/1808054
Regards.
Juan Carlos Alonso
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss