Thanks Chris, will double check that during the day. BR Elio From: Winnicki, Chris [mailto:Chris.Winnicki@windriver.com] Sent: Wednesday, March 20, 2019 8:56 AM To: Martinez Monroy, Elio <elio.martinez.monroy@intel.com>; starlingx-discuss@lists.starlingx.io Subject: RE: Duplex Direct CPE connection Hi Elio In Ottawa we currently have duplex-direct system installed with load: BUILD_ID="20190318T013000Z" (load details below, including parameters supplied to config_controller) - There is no issue in executing any system commands. For everyone's benefit it would be great if questions posted to the group included more system details; such as: 1) Load/build details 2) Hardware used (and or Virtual environment) 3) Config details # Buid/Load info: [wrsroot@controller-0 ~(keystone_admin)]$ cat /etc/platform/platform.conf ### ### StarlingX ### Built from master ### OS="centos" SW_VERSION="19.01" BUILD_TARGET="Host Installer" BUILD_TYPE="Formal" BUILD_ID="20190318T013000Z" JOB="STX_build_master_master" BUILD_BY="starlingx.build@cengn.ca<mailto:starlingx.build@cengn.ca>" BUILD_NUMBER="23" BUILD_HOST="starlingx_mirror" BUILD_DATE="2019-03-18 01:30:00 +0000" # The following parameters were supplied to config_controller [VERSION] RELEASE = 19.01 [SYSTEM] SYSTEM_MODE=duplex-direct [PXEBOOT_NETWORK] PXEBOOT_CIDR = 192.168.222.0/24 [LOGICAL_INTERFACE_1] LAG_INTERFACE = N INTERFACE_MTU = 9216 INTERFACE_LINK_CAPACITY=10000 INTERFACE_PORTS = enp136s0f0 [MGMT_NETWORK] VLAN = 192 CIDR = 192.168.204.0/24 MULTICAST_CIDR = 239.0.74.16/28 DYNAMIC_ALLOCATION = Y LOGICAL_INTERFACE = LOGICAL_INTERFACE_1 [CLUSTER_NETWORK] VLAN = 193 CIDR = 192.168.205.0/24 LOGICAL_INTERFACE = LOGICAL_INTERFACE_1 [OAM_NETWORK] CIDR = 128.224.150.0/23 MULTICAST_CIDR = 239.0.74.128/28 GATEWAY = 128.224.150.1 IP_FLOATING_ADDRESS = 128.224.150.248 IP_UNIT_0_ADDRESS = 128.224.150.247 IP_UNIT_1_ADDRESS = 128.224.150.251 LOGICAL_INTERFACE = LOGICAL_INTERFACE_2 [LOGICAL_INTERFACE_2] LAG_INTERFACE = N INTERFACE_MTU = 1500 INTERFACE_PORTS = enp136s0f1 [AUTHENTICATION] ADMIN_PASSWORD = Li69nux* Regards, Chris Winnicki chris.winnicki@windriver.com<mailto:chris.winnicki@windriver.com> 613-963-1329 ________________________________ From: Martinez Monroy, Elio [elio.martinez.monroy@intel.com] Sent: Tuesday, March 19, 2019 6:19 PM To: starlingx-discuss@lists.starlingx.io<mailto:starlingx-discuss@lists.starlingx.io> Subject: [Starlingx-discuss] Duplex Direct CPE connection Hello guys, Have everyone tried with CPE duplex direct connection? After the config_controller im not able to get the system working. Every "system" command line is showing: "aN unexpected error prevented the server from fulfilling your request" Is the configuration broken? Because not even system host-list works. I will check more details collecting all logs BR [cid:image001.png@01CF8BAC.3B4C5DD0] Martinez Monroy, Elio.
