Hi Lokendra, Anirudh, and team,
Thanks for submitting the STX Documentation launchpad for your issue:
https://bugs.launchpad.net/starlingx/+bug/1915285
We discussed it at our Docs meeting and wanted to point you to the Node Management Guide for more info.
Here are some relevant sections that may be helpful:
Good luck,
Mary Camp
Kelly Services Technical Writer |
maryx.camp@intel.com
From: Lokendra Singh Rathour <Lokendra.Rathour@hsc.com>
Sent: Monday, February 8, 2021 11:49 PM
To: starlingx-discuss@lists.starlingx.io
Subject: Re: [Starlingx-discuss] [STARLINGX 4.0] APPLICATION UPLOAD GETTING FAILED - with LAG Interface
Hi Team,
Any update with respect the Query raised!!
Best Regards,
Lokendra
From: Lokendra Singh Rathour
Sent: Friday, February 5, 2021 5:27 PM
To: starlingx-discuss@lists.starlingx.io
Subject: [STARLINGX 4.0] APPLICATION UPLOAD GETTING FAILED - with LAG Interface
Hello Team,
We are trying to setup dedicated Storage setup using StarlingX 4.0 over which we have certain observations/Error during the time of worker Node Configuration for the LAG type Data interfaces. Though we have tweaked the procedure a bit and
successfully unlocked the Worker Nodes,we are facing the error in upload the STX Application packages. Steps as followed:
STEP 1:
We have created bonds for Data Network on Worker Node(reference document:
https://docs.starlingx.io/configuration/host_interface_network_config.html#:~:text=When%20a%20host%20is%20added,system%20host%2Dif%2Dadd.)
STEP 2:
Then further as per the main documents when
Configuring data interfaces for worker nodes ( reference document: https://docs.starlingx.io/deploy_install_guides/r4_release/bare_metal/dedicated_storage_install_kubernetes.html)
Above files does not have the information of the created Bond interfaces for data Nodes,
Further in order to get the the value of ${DATA0IFUUID} and
${DATA1IFUUID} below mentioned commands are executed:
DATA0IF=<DATA-0-PORT>
DATA1IF=<DATA-1-PORT>
PHYSNET0='physnet0'
PHYSNET1='physnet1'
SPL=/tmp/tmp-system-port-list
SPIL=/tmp/tmp-system-host-if-list
# configure the datanetworks in sysinv, prior to referencing it
# in the ``system host-if-modify`` command'.
system datanetwork-add ${PHYSNET0} vlan
system datanetwork-add ${PHYSNET1} vlan
for NODE in worker-0 worker-1; do
echo "Configuring interface for: $NODE"
set -ex
system host-port-list ${NODE} --nowrap > ${SPL}
system host-if-list -a ${NODE} --nowrap > ${SPIL}
DATA0PCIADDR=$(cat $SPL | grep $DATA0IF |awk '{print $8}')
DATA1PCIADDR=$(cat $SPL | grep $DATA1IF |awk '{print $8}')
DATA0PORTUUID=$(cat $SPL | grep ${DATA0PCIADDR} | awk '{print $2}')
DATA1PORTUUID=$(cat $SPL | grep ${DATA1PCIADDR} | awk '{print $2}')
DATA0PORTNAME=$(cat $SPL | grep ${DATA0PCIADDR} | awk '{print $4}')
DATA1PORTNAME=$(cat $SPL | grep ${DATA1PCIADDR} | awk '{print $4}')
DATA0IFUUID=$(cat $SPIL | awk -v DATA0PORTNAME=$DATA0PORTNAME '($12 ~ DATA0PORTNAME) {print $2}')
DATA1IFUUID=$(cat $SPIL | awk -v DATA1PORTNAME=$DATA1PORTNAME '($12 ~ DATA1PORTNAME) {print $2}')
system host-if-modify -m 1500 -n data0 -c data ${NODE} ${DATA0IFUUID}
system host-if-modify -m 1500 -n data1 -c data ${NODE} ${DATA1IFUUID}
system interface-datanetwork-assign ${NODE} ${DATA0IFUUID} ${PHYSNET0}
system interface-datanetwork-assign ${NODE} ${DATA1IFUUID} ${PHYSNET1}
set +ex
done
But in our case these values in the variable(${DATA0IFUUID} and
${DATA1IFUUID}) were not getting populated, therefore we have used the UUID received from command :
System host-if-list worker-0
System host-if-list worker-1
We observed that UUID of any ethernet interface mentioned in the file (SPIL=/tmp/tmp-system-host-if-list
) matches with the UUID obtained by running the above command(System host-if-list worker-0 ) , so as we did not get the UUID from the file in case LAG Bonds we passed the Values of UUID directly.
STEP 3:
Using the change, we were able to successfully unlock the worker Nodes.
[sysadmin@controller-0 ~(keystone_admin)]$ system host-list +----+--------------+-------------+----------------+-------------+--------------+ | id | hostname | personality | administrative | operational | availability | +----+--------------+-------------+----------------+-------------+--------------+ | 1 | controller-0 | controller | unlocked | enabled | available | | 2 | controller-1 | controller | unlocked | enabled | available | | 3 | storage-0 | storage | unlocked | enabled | available | | 4 | storage-1 | storage | unlocked | enabled | available | | 5 | worker-0 | worker | unlocked | enabled | available | | 6 | worker-1 | worker | unlocked | enabled | available | +----+--------------+-------------+----------------+-------------+--------------+ |
STEP 4:
Then Further while running the application-upload:
system application-upload stx-openstack-<version>-centos-stable-versioned.tgz
Error as below was seen
Error: 2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app File "/usr/lib64/python2.7/site-packages/sysinv/helm/helm.py", line 317, in _get_helm_chart_overrides 2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app cnamespace)) 2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app File "/opt/platform/helm/20.06/stx-openstack/1.0-49-centos-stable-versioned/plugins/k8sapp_openstack/helm/neutron.py", line 45, in get_overrides 2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app 'hosts': self._get_per_host_overrides() 2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app File "/opt/platform/helm/20.06/stx-openstack/1.0-49-centos-stable-versioned/plugins/k8sapp_openstack/helm/neutron.py", line 105, in _get_per_host_overrides 2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app 'auto_bridge_add': self._get_host_bridges(host)}) 2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app File "/opt/platform/helm/20.06/stx-openstack/1.0-49-centos-stable-versioned/plugins/k8sapp_openstack/helm/neutron.py", line 141, in _get_host_bridges 2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app port_name = self._get_interface_port_name(iface) 2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app File "/opt/platform/helm/20.06/stx-openstack/1.0-49-centos-stable-versioned/plugins/k8sapp_openstack/helm/neutron.py",
line 280, in _get_interface_port_name 2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app assert iface['iftype'] == constants.INTERFACE_TYPE_ETHERNET 2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app AssertionError 2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app |
Kindly check and help in advising the way forward here w.r.t. as
Reference Documents:
For Deployment:
https://docs.starlingx.io/deploy_install_guides/r4_release/bare_metal/dedicated_storage_install_kubernetes.html
DISCLAIMER: This electronic message and all of its contents, contains information which is privileged, confidential or otherwise protected from disclosure. The information contained in this electronic mail transmission is intended for use
only by the individual or entity to which it is addressed. If you are not the intended recipient or may have received this electronic mail transmission in error, please notify the sender immediately and delete / destroy all copies of this electronic mail transmission
without disclosing, copying, distributing, forwarding, printing or retaining any part of it. Hughes Systique accepts no responsibility for loss or damage arising from the use of the information transmitted by this email including damage from virus.