Thanks Mary, Hi, All - Regarding 2] igb_uio I found the igb_uio kernel module at the below location which doesn't seem to be loaded by default. controller-0:/lib/modules# find . -name *.ko |grep igb ./4.18.0-147.3.1.rt24.96.el8_1.tis.8.x86_64/extra/igb_uio/igb_uio.ko Is there any other reason why it isn't loaded by default?. Is this the target module to be loaded to work with igb_uio ? Regards, Venkata Veldanda From: Camp, MaryX <maryx.camp@intel.com> Sent: Friday, January 22, 2021 9:06 PM To: Venkata Ramana Veldanda <Venkata.Veldanda@radisys.com>; starlingx-discuss@lists.starlingx.io Subject: RE: Intel N3000 FPGA & support for igb_uio module The e-mail below is from an external source. Please do not open attachments or click links from an unknown or suspicious origin. Hi Venkata, Regarding 1] The StarlingX docs team is upstreaming content at the moment. There is more N3000 FPGA info in the Node Management guide: https://docs.starlingx.io/node_management/index.html Please see these specific sections: https://docs.starlingx.io/node_management/starlingx-kubernetes/hardware_acce... https://docs.starlingx.io/node_management/starlingx-kubernetes/hardware_acce... I hope this is helpful. thanks, Mary Camp Kelly Services Technical Writer | maryx.camp@intel.com<mailto:maryx.camp@intel.com> From: Venkata Ramana Veldanda <Venkata.Veldanda@radisys.com<mailto:Venkata.Veldanda@radisys.com>> Sent: Friday, January 22, 2021 4:11 AM To: starlingx-discuss@lists.starlingx.io<mailto:starlingx-discuss@lists.starlingx.io> Subject: [Starlingx-discuss] Intel N3000 FPGA & support for igb_uio module Hi Team, 1] I am using StarlingX 4.0 and trying to use the below guide to setup N3000 Vista Creek FPGA card. https://docs.starlingx.io/configuration/intel_n3000_fpga.html ~(keystone_admin)$ system device-image-upload imagefile root-key pci_vendor pci_device --key-signature key_signature --name imagename --description description --image-version version As part of my N3000 package I see some set of installer images, NVM package updates, iavf driver packages etc. However I am looking for the specific parameters that are highlighted above but I don't find. Anyone has an idea what does the file name look like for the root-key or the key_signature? On my baremetal (CentOS vanilla) installation I was following the standard procedure defined "https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/..." but there I didn't have to use any such key etc. Any help would be appreciated. 2] Secondly, in StarlingX 4.0 I don't find igb_uio module present on the host. Is it currently supported as part of stx 4.0? controller-0:~$ lsmod |grep igb_uio controller-0:~$ Per documentation I see the below The supported VF driver(s) are currently: - igb_uio - vfio Venkata Veldanda