Hi Austin, This is PowerEdge R440 server with BIOS Version: 2.11.2 and iDRAC Firmware Version: 5.00.00.00. We are able to PXE boot starlingx 4.0 but the problem is coming with starlingx 5.0. Please guide us if some-work-around is available for this issue. Thanks, Ankush From: Shrinidhim, Shrinidhi <Shrinidhi.Shrinidhim@commscope.com> Sent: Thursday, September 23, 2021 11:38 AM To: Sun, Austin <austin.sun@intel.com>; starlingx-discuss@lists.starlingx.io Cc: Dharwadkar, Sriram <Sriram.Dharwadkar@commscope.com>; Rai, Ankush <Ankush.Rai@commscope.com> Subject: RE: PXE-boot error with 5.0 build Hello Austin, Please find the HW details below: Physical Disk 0:1:0 Online 0 2235 GB SAS HDD Physical Disk 0:1:1 Online 1 2235 GB SAS HDD Virtual Disks sda Online RAID-0 2235 GB HDD sdb Online RAID-0 2235 GB HDD CPU: CPU1 Status Intel(R) Xeon(R) Silver 4216 CPU @ 2.10GHz Model 85 Stepping 7 2100 MT/s CPU2 Status Intel(R) Xeon(R) Silver 4216 CPU @ 2.10GHz Model 85 Stepping 7 2100 MT/s Memory Attributes: Installed Capacity 128 GB Maximum Capacity 1024 GB Slots Available 16 Slots Used 4 Error Correction Multi-bit ECC Best Regards, Shrinidhi M Trainee Engineer CommScope India Private Limited, Bengaluru. [cid:image007.png@01D7B4BD.9B7D2E90] Mobile Number: +91 9900626261 From: Sun, Austin <austin.sun@intel.com<mailto:austin.sun@intel.com>> Sent: Wednesday, September 22, 2021 12:23 PM To: Shrinidhim, Shrinidhi <Shrinidhi.Shrinidhim@commscope.com<mailto:Shrinidhi.Shrinidhim@commscope.com>>; starlingx-discuss@lists.starlingx.io<mailto:starlingx-discuss@lists.starlingx.io> Cc: Dharwadkar, Sriram <Sriram.Dharwadkar@commscope.com<mailto:Sriram.Dharwadkar@commscope.com>>; Rai, Ankush <Ankush.Rai@commscope.com<mailto:Ankush.Rai@commscope.com>> Subject: RE: PXE-boot error with 5.0 build Hi Shrinidhi: Would you like share the HW config details ? such as disk , RAID etc , usually this crash due to hw not supported. Thanks. BR Austin Sun. External (austin.sun@intel.com<mailto:austin.sun@intel.com>) Report This Email<https://shared.outlook.inky.com/report?id=Y29tbXNjb3BlL3NocmluaWRoaS5zaHJpbmlkaGltQGNvbW1zY29wZS5jb20vMmI3NjA3ODUwYTc1ZWE4ZjFkOTY2OTFmMTdiMTMyNDQvMTYzMjI5MzU5Ni40Nw==#key=cc0e291cc7e4b885ee24a267e652ca0b> FAQ<https://www.inky.com/banner-faq/> Protection by INKY<https://www.inky.com> Hi Shrinidhi: Would you like share the HW config details ? such as disk , RAID etc , usually this crash due to hw not supported. Thanks. BR Austin Sun. From: Shrinidhim, Shrinidhi <Shrinidhi.Shrinidhim@commscope.com<mailto:Shrinidhi.Shrinidhim@commscope.com>> Sent: Wednesday, September 22, 2021 2:34 PM To: starlingx-discuss@lists.starlingx.io<mailto:starlingx-discuss@lists.starlingx.io> Cc: Dharwadkar, Sriram <Sriram.Dharwadkar@commscope.com<mailto:Sriram.Dharwadkar@commscope.com>>; Rai, Ankush <Ankush.Rai@commscope.com<mailto:Ankush.Rai@commscope.com>> Subject: Re: [Starlingx-discuss] PXE-boot error with 5.0 build Hello, Kindly respond as soon as possible. Best Regards, Shrinidhi M Trainee Engineer CommScope India Private Limited, Bengaluru. [cid:image008.png@01D7B4BD.9B7D2E90] Mobile Number: +91 9900626261 From: Shrinidhim, Shrinidhi Sent: Tuesday, September 21, 2021 4:17 PM To: starlingx-discuss@lists.starlingx.io<mailto:starlingx-discuss@lists.starlingx.io> Cc: Sriram.Dharwadkar@commscope.com<mailto:Sriram.Dharwadkar@commscope.com>; Rai, Ankush <Ankush.Rai@commscope.com<mailto:Ankush.Rai@commscope.com>> Subject: PXE-boot error with 5.0 build Hi, We are trying All In One deployment with Dell-R440 servers. The Controller-0 comes-up without any issue but controller-1 failed to PXE boot and the kernel got stuck with kernel crash. Panic Logs are generated in the console. Kindly check the attachment of different installation stages of controller-1 console and let us know how to resolve this and make controller-1 up. Best Regards, Shrinidhi M Trainee Engineer CommScope India Private Limited, Bengaluru. [cid:image009.png@01D7B4BD.9B7D2E90] Mobile Number: +91 9900626261
