Unfortunately, still I cannot access dashboard.

I'll try another latest boot image.

Thank you for all helps :)

BR.
Jaewook.

2019년 2월 19일 (화) 오후 4:16, xiongzhiwei@baicells.com <xiongzhiwei@baicells.com>님이 작성:
Hi Jaewook,

My ip setting is as below:
Actually, I had used three physical interface, enp2s0f0 is OAM inf with default ip 10.10.10.2/24,  because it is not inconvenient in my operation room, so I had configured enp2s0f1 for my romote access.
I can access the dashboard both with ip 10.10.10.2 in lab and 192.168.107.232/22 in my operation room.
The third inf enp2s0f2 is used to data interface, I had created three VMs and network worked normally.


controller-0:~$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet 192.168.204.3/28 brd 192.168.204.15 scope host lo
       valid_lft forever preferred_lft forever
    inet 169.254.202.2/24 scope host lo
       valid_lft forever preferred_lft forever
    inet 192.168.204.2/28 scope host secondary lo
       valid_lft forever preferred_lft forever
    inet 192.168.204.5/28 scope host secondary lo
       valid_lft forever preferred_lft forever
    inet 192.168.204.10/28 scope host secondary lo
       valid_lft forever preferred_lft forever
    inet 192.168.204.6/28 scope host secondary lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: enp4s0f0: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether 00:1b:21:bc:ff:a8 brd ff:ff:ff:ff:ff:ff
3: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether f8:75:88:6e:8f:e2 brd ff:ff:ff:ff:ff:ff
    inet 10.10.10.2/24 brd 10.10.10.255 scope global enp2s0f0
       valid_lft forever preferred_lft forever
    inet6 fe80::fa75:88ff:fe6e:8fe2/64 scope link 
       valid_lft forever preferred_lft forever
4: enp2s0f1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether f8:75:88:6e:8f:e3 brd ff:ff:ff:ff:ff:ff
    inet 192.168.107.232/22 brd 192.168.107.255 scope global enp2s0f1
       valid_lft forever preferred_lft forever
    inet6 fe80::fa75:88ff:fe6e:8fe3/64 scope link 
       valid_lft forever preferred_lft forever
6: enp2s0f3: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether f8:75:88:6e:8f:e5 brd ff:ff:ff:ff:ff:ff
7: ovs-netdev: <BROADCAST,PROMISC> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 8e:da:6c:1b:fd:15 brd ff:ff:ff:ff:ff:ff
8: br-int: <BROADCAST,PROMISC> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether f6:df:04:bf:a1:43 brd ff:ff:ff:ff:ff:ff
12: br-phy0: <BROADCAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 1000
    link/ether f8:75:88:6e:8f:e4 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::fa75:88ff:fe6e:8fe4/64 scope link 
       valid_lft forever preferred_lft forever
13: lldp0d64ae5d-22: <BROADCAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 1000
    link/ether 96:e0:03:51:17:6d brd ff:ff:ff:ff:ff:ff
    inet6 fe80::94e0:3ff:fe51:176d/64 scope link 
       valid_lft forever preferred_lft forever


BR
Tim Xiong
 
From: Jaewook Oh
Date: 2019-02-19 15:00
Subject: Re: [Starlingx-discuss] [deploy-fail] Failed to deploy All-in-one simplex configuration
Hello Tim,

thanks for your answer :)

However, still I cannot access to the dashboard.

I deployed StarlingX 3 times again, but the situation never changes..

If you don't mind, can I see your ip setting with (ip a command)?

Best Regards,
Jaewook.

2019년 2월 19일 (화) 오후 3:56, xiongzhiwei@baicells.com <xiongzhiwei@baicells.com>님이 작성:
Hi Jaewook,

I just finished stx all-in-one simplex on Bearmetal last week. The horizon service had been installed defaultly and you should be able to access the dashboard now.
Your service list is same as mine.

[wrsroot@controller-0 ~(keystone_admin)]$ openstack service list
+----------------------------------+------------+-----------------+
| ID                               | Name       | Type            |
+----------------------------------+------------+-----------------+
| c51dfde10adf4445a78113ad6e648b9a | barbican   | key-manager     |
| df07161f527b483292ac5aa5ed722687 | keystone   | identity        |
| 744183df128d414f97390fb70fcac72f | sysinv     | platform        |
| b9730f2e673443e4a6d003a7dad1d220 | fm         | faultmanagement |
| 5d7855696b1f440b8401670e1df6cb28 | glance     | image           |
| 814a777c22884c97ab44baf0a4c2c669 | aodh       | alarming        |
| 68362243cc214c4181a15e583894e495 | placement  | placement       |
| 375cfb87c5f6449e81512ead128a513e | gnocchi    | metric          |
| 2643dadbe71b4fc68ad4daa7d9d3859f | nova       | compute         |
| f312a1c459c245c5a045c69688f695db | heat-cfn   | cloudformation  |
| cbf811729020470a81b3c7be0d453fc9 | neutron    | network         |
| 0fb46b24873648f9bac3a3e4d9f1f4e2 | patching   | patching        |
| 52db1ccfca9d4033be5f1180c50d8234 | ceilometer | metering        |
| 094935b6dee245278bffc3f7ee21e9e9 | vim        | nfv             |
| bc5297541def4f8b8881254af9896824 | smapi      | smapi           |
| a388667479484a04824f07a672a331eb | panko      | event           |
| 8c982073cd6c4d04b6ecb49e76650d2c | heat       | orchestration   |
| 38c0b001ef514af5b1ba6947bed1bc6c | cinderv3   | volumev3        |
| 98699ea84e4543b6b0808e24395542bb | cinderv2   | volumev2        |
| 253390980b274178b7a16844e2c7a826 | cinder     | volume          |
+----------------------------------+------------+-----------------+

BR
Tim Xiong

From: Jaewook Oh
Date: 2019-02-19 12:48
Subject: Re: [Starlingx-discuss] [deploy-fail] Failed to deploy All-in-one simplex configuration
Hello StarlingX Teams,

I found that the horizon dashboard project were not installed automatically when I deployed StarlingX all-in-one simplex on Baremetal.
Are there any reason for this problem..?
I used  "2019-Feb-08 03:40:29 bootimage.iso".

[wrsroot@controller-0 ~(keystone_admin)]$ openstack service list
+----------------------------------+------------+-----------------+
| ID                               | Name       | Type            |
+----------------------------------+------------+-----------------+
| f8b821fdd8e44d8484a3521ade041340 | barbican   | key-manager     |
| 6f34b6874b624604a7f8798b95743dc4 | keystone   | identity        |
| d31b2325f40e4ce88ca6974ee852eff6 | sysinv     | platform        |
| cb68c2d74dc34caf91dfc92c9b099d22 | fm         | faultmanagement |
| a7f2ae41f2ff45bd904012a0a53b63ec | glance     | image           |
| 3daea4e7507a4568a132579b4f30e4d6 | aodh       | alarming        |
| af6e9c3f185f498a8f8b7d1afaeaa06d | placement  | placement       |
| b1c2243ab7e24fe08bf408677a7f8e1d | gnocchi    | metric          |
| 0e21d579ddee4f2dbfe98ff4069ce321 | nova       | compute         |
| 15067bfe219b4645973f7399099c47da | heat-cfn   | cloudformation  |
| ecf3478c84334c2ba647740bde190739 | neutron    | network         |
| 28973cbc638c41c6b99b5e77264a2aec | patching   | patching        |
| a120d0d2ed0b45b39114e4e9cab5fd78 | ceilometer | metering        |
| 12b32e4a181a4684ab05be02b3726d0c | vim        | nfv             |
| a9c28c1889a347359a9b77edf53e5833 | smapi      | smapi           |
| 2697e71aa8dc4f8b8d96c72b32c89440 | panko      | event           |
| 57a5cb58128445b5819747271c095a89 | heat       | orchestration   |
| 10c93aecb5a84278b940da2f8c3a1721 | cinderv3   | volumev3        |
| b569ff8b77364311bbf3a5dee38dd614 | cinderv2   | volumev2        |
| 449ceb89f8fe40779dd65c5a9c867161 | cinder     | volume          |
+----------------------------------+------------+-----------------+

I thought horizon should also be installed with StarlingX's deployment.
If not, please let me know how can I install horizon in this StarlingX.

Thanks for help in advance :)

Best Regards,
Jaewook.


2019년 2월 12일 (화) 오후 2:54, Jaewook Oh <kyle.oh95@gmail.com>님이 작성:
Hello starlingx team,

I deployed Starlingx All-in-one simplex setting on my server,
it seems deployment was done well.
However I cannot access to the dashboard.

I used  "2019-Feb-08 03:40:29 bootimage.iso".


Following log is the service that are now enabled,
[wrsroot@controller-0 ~(keystone_admin)]$ system service-list
+-----+-------------------------------+--------------+----------------+
| id  | service_name                  | hostname     | state          |
+-----+-------------------------------+--------------+----------------+
| 68  | aodh-api                      | controller-0 | enabled-active |
| 69  | aodh-evaluator                | controller-0 | enabled-active |
| 70  | aodh-listener                 | controller-0 | enabled-active |
| 71  | aodh-notifier                 | controller-0 | enabled-active |
| 102 | barbican-api                  | controller-0 | enabled-active |
| 103 | barbican-keystone-listener    | controller-0 | enabled-active |
| 104 | barbican-worker               | controller-0 | enabled-active |
| 43  | ceilometer-agent-notification | controller-0 | enabled-active |
| 14  | cgcs-export-fs                | controller-0 | enabled-active |
| 10  | cgcs-fs                       | controller-0 | enabled-active |
| 16  | cgcs-nfs-ip                   | controller-0 | enabled-active |
| 35  | cinder-api                    | controller-0 | enabled-active |
| 38  | cinder-backup                 | controller-0 | enabled-active |
| 58  | cinder-ip                     | controller-0 | enabled-active |
| 56  | cinder-lvm                    | controller-0 | enabled-active |
| 36  | cinder-scheduler              | controller-0 | enabled-active |
| 37  | cinder-volume                 | controller-0 | enabled-active |
| 23  | dnsmasq                       | controller-0 | enabled-active |
| 5   | drbd-cgcs                     | controller-0 | enabled-active |
| 55  | drbd-cinder                   | controller-0 | enabled-active |
| 75  | drbd-extension                | controller-0 | enabled-active |
| 3   | drbd-pg                       | controller-0 | enabled-active |
| 6   | drbd-platform                 | controller-0 | enabled-active |
| 4   | drbd-rabbit                   | controller-0 | enabled-active |
| 77  | extension-export-fs           | controller-0 | enabled-active |
| 76  | extension-fs                  | controller-0 | enabled-active |
| 24  | fm-mgr                        | controller-0 | enabled-active |
| 27  | glance-api                    | controller-0 | enabled-active |
| 26  | glance-registry               | controller-0 | enabled-active |
| 108 | gnocchi-api                   | controller-0 | enabled-active |
| 109 | gnocchi-metricd               | controller-0 | enabled-active |
| 62  | guest-agent                   | controller-0 | enabled-active |
| 64  | haproxy                       | controller-0 | enabled-active |
| 45  | heat-api                      | controller-0 | enabled-active |
| 46  | heat-api-cfn                  | controller-0 | enabled-active |
| 47  | heat-api-cloudwatch           | controller-0 | enabled-active |
| 44  | heat-engine                   | controller-0 | enabled-active |
| 51  | horizon                       | controller-0 | enabled-active |
| 22  | hw-mon                        | controller-0 | enabled-active |
| 57  | iscsi                         | controller-0 | enabled-active |
| 25  | keystone                      | controller-0 | enabled-active |
| 50  | lighttpd                      | controller-0 | enabled-active |
| 2   | management-ip                 | controller-0 | enabled-active |
| 20  | mtc-agent                     | controller-0 | enabled-active |
| 28  | neutron-server                | controller-0 | enabled-active |
| 9   | nfs-mgmt                      | controller-0 | enabled-active |
| 29  | nova-api                      | controller-0 | enabled-active |
| 63  | nova-api-proxy                | controller-0 | enabled-active |
| 31  | nova-conductor                | controller-0 | enabled-active |
| 33  | nova-console-auth             | controller-0 | enabled-active |
| 34  | nova-novnc                    | controller-0 | enabled-active |
| 83  | nova-placement-api            | controller-0 | enabled-active |
| 30  | nova-scheduler                | controller-0 | enabled-active |
| 48  | open-ldap                     | controller-0 | enabled-active |
| 82  | panko-api                     | controller-0 | enabled-active |
| 52  | patch-alarm-manager           | controller-0 | enabled-active |
| 7   | pg-fs                         | controller-0 | enabled-active |
| 15  | platform-export-fs            | controller-0 | enabled-active |
| 11  | platform-fs                   | controller-0 | enabled-active |
| 17  | platform-nfs-ip               | controller-0 | enabled-active |
| 12  | postgres                      | controller-0 | enabled-active |
| 65  | pxeboot-ip                    | controller-0 | enabled-active |
| 13  | rabbit                        | controller-0 | enabled-active |
| 8   | rabbit-fs                     | controller-0 | enabled-active |
| 49  | snmp                          | controller-0 | enabled-active |
| 19  | sysinv-conductor              | controller-0 | enabled-active |
| 18  | sysinv-inv                    | controller-0 | enabled-active |
| 59  | vim                           | controller-0 | enabled-active |
| 60  | vim-api                       | controller-0 | enabled-active |
| 61  | vim-webserver                 | controller-0 | enabled-active |
+-----+-------------------------------+--------------+----------------+

As you can see, I cannot find #1 service (oam-ip), and I think this is one of the main reasons.

And also I had a problem when I followed the installation instruction.

[wrsroot@controller-0 ~(keystone_admin)]$ neutron providernet-create providernet-a --type=vlan
[wrsroot@controller-0 ~(keystone_admin)]$ neutron providernet-range-create --name providernet-a-range1 --range 100-400 providernet-a
[wrsroot@controller-0 ~(keystone_admin)]$ system host-if-modify -c data controller-0 eth1000 -p providernet-a

Above instruction was not naturally worked, I mean the third command, 'host-if-modify' failed with the message "DataNetwork providernet-a could not be found."

So I googled and I figured out I should command 
$ system datanetwork-add providernet-a vlan
first.

But I remember when my first deployment succeed, I didn't need to use that command at all. (The deployment was implemented on Jan.)

Any help is appreciated, thank you for your help in advance.

Best Regards,
Jaewook.

================================================
Jaewook Oh (오재욱)
IISTRC - Internet Infra System Technology Research Center
369 Sangdo-ro, Dongjak-gu,
06978, Seoul, Republic of Korea


--
================================================
Jaewook Oh (오재욱)
IISTRC - Internet Infra System Technology Research Center
369 Sangdo-ro, Dongjak-gu,
06978, Seoul, Republic of Korea


--
================================================
Jaewook Oh (오재욱)
IISTRC - Internet Infra System Technology Research Center
369 Sangdo-ro, Dongjak-gu,
06978, Seoul, Republic of Korea


--
================================================
Jaewook Oh (오재욱)
IISTRC - Internet Infra System Technology Research Center
369 Sangdo-ro, Dongjak-gu,
06978, Seoul, Republic of Korea