Hi Elio

In Ottawa we currently have duplex-direct system installed with load: BUILD_ID="20190318T013000Z" (load details below, including parameters supplied to config_controller) - There is no issue in executing any system commands.

For everyone's benefit it would be great if questions posted to the group included more system details; such as:
1) Load/build details
2) Hardware used (and or Virtual environment)
3) Config details


# Buid/Load info:

[wrsroot@controller-0 ~(keystone_admin)]$ cat /etc/platform/platform.conf

###
### StarlingX
###     Built from master
###

OS="centos"
SW_VERSION="19.01"
BUILD_TARGET="Host Installer"
BUILD_TYPE="Formal"
BUILD_ID="20190318T013000Z"

JOB="STX_build_master_master"
BUILD_BY="starlingx.build@cengn.ca"
BUILD_NUMBER="23"
BUILD_HOST="starlingx_mirror"
BUILD_DATE="2019-03-18 01:30:00 +0000"



# The following parameters were supplied to config_controller

[VERSION]
RELEASE = 19.01

[SYSTEM]
SYSTEM_MODE=duplex-direct

[PXEBOOT_NETWORK]
PXEBOOT_CIDR = 192.168.222.0/24

[LOGICAL_INTERFACE_1]
LAG_INTERFACE = N
INTERFACE_MTU = 9216
INTERFACE_LINK_CAPACITY=10000
INTERFACE_PORTS = enp136s0f0

[MGMT_NETWORK]
VLAN = 192
CIDR = 192.168.204.0/24
MULTICAST_CIDR = 239.0.74.16/28
DYNAMIC_ALLOCATION = Y
LOGICAL_INTERFACE = LOGICAL_INTERFACE_1

[CLUSTER_NETWORK]
VLAN = 193
CIDR = 192.168.205.0/24
LOGICAL_INTERFACE = LOGICAL_INTERFACE_1

[OAM_NETWORK]
CIDR = 128.224.150.0/23
MULTICAST_CIDR = 239.0.74.128/28
GATEWAY = 128.224.150.1
IP_FLOATING_ADDRESS = 128.224.150.248
IP_UNIT_0_ADDRESS = 128.224.150.247
IP_UNIT_1_ADDRESS = 128.224.150.251
LOGICAL_INTERFACE = LOGICAL_INTERFACE_2

[LOGICAL_INTERFACE_2]
LAG_INTERFACE = N
INTERFACE_MTU = 1500
INTERFACE_PORTS = enp136s0f1

[AUTHENTICATION]
ADMIN_PASSWORD = Li69nux*



Regards,


Chris Winnicki
chris.winnicki@windriver.com
613-963-1329


From: Martinez Monroy, Elio [elio.martinez.monroy@intel.com]
Sent: Tuesday, March 19, 2019 6:19 PM
To: starlingx-discuss@lists.starlingx.io
Subject: [Starlingx-discuss] Duplex Direct CPE connection

Hello guys,

 

Have everyone tried with CPE duplex direct connection?

 

After the config_controller im not able to get the system working. Every “system” command line is showing:

“aN unexpected error prevented the server from fulfilling your request”

 

Is the configuration broken? Because not even system host-list works. I will check more details collecting all logs

 

 

BR

 

cid:image001.png@01CF8BAC.3B4C5DD0      Martinez Monroy, Elio.