Hi Jaewook,

For the 8080 change, you could find the history in below mail:

http://lists.starlingx.io/pipermail/starlingx-discuss/2019-February/003017.html

 

For the PXE mode, you could use “system host-show controller-1 | grep install” to get controller-1 install status.

Please make sure controller-1 is configured to boot with disk first.  Just manuall choose pxeboot for the first time installation.

Otherwise, if controller-1 is configured to using pxeboot as first priority, it will lead to deadloop of installation.

 

Best Regards

Shuicheng

 

From: Jaewook Oh [mailto:kyle.oh95@gmail.com]
Sent: Friday, February 22, 2019 2:54 PM
To: starlingx-discuss <starlingx-discuss@lists.starlingx.io>
Subject: [Starlingx-discuss] Duplex PXE Booting seems failed

 

Hello StarlingX Team,

 

I finally solved the horizon error, the port number was different.

I don't know why the port was changed, but anyway the port number was 8080, not 80.

 

But I'm now facing new obstacles, Duplex PXE Booting.

 

I succeed to connect PXE mode, but no more process..

 

In Controller-0, I can find below result,

 

image.png

 

And another node that should've been controller-1, shows below letters on the display.

 

1) All-in-one

 

Loading rel-19.01/installer-bzImage.........

Loading rel-19.01/installer-initrd............................................................................ready.

 

 

I waited this task for a day, but no changes.

 

Any help would be very appreciated.

 

Best Regards,

Jaewook.

 

================================================
Jaewook Oh (
오재욱)
IISTRC - Internet Infra System Technology Research Center
369 Sangdo-ro, Dongjak-gu,
06978, Seoul, Republic of Korea