Hello Austin,
Please find the HW details below:
|
Physical Disk 0:1:0 |
Online |
0 |
2235 GB |
SAS |
HDD |
|
Physical Disk 0:1:1 |
Online |
1 |
2235 GB |
SAS |
HDD |
Virtual Disks
|
sda |
Online |
RAID-0 |
2235 GB |
HDD |
|
sdb |
Online |
RAID-0 |
2235 GB |
HDD |
CPU:
|
CPU1 Status |
Intel(R) Xeon(R) Silver 4216 CPU @ 2.10GHz |
Model 85 Stepping 7 |
2100 MT/s |
|
CPU2 Status |
Intel(R) Xeon(R) Silver 4216 CPU @ 2.10GHz |
Model 85 Stepping 7 |
2100 MT/s |
Memory Attributes:
|
Installed Capacity |
128 GB |
|
Maximum Capacity |
1024 GB |
|
Slots Available |
16 |
|
Slots Used |
4 |
|
Error Correction |
Multi-bit ECC |
Best Regards,
Shrinidhi M
Trainee Engineer
CommScope India Private Limited, Bengaluru.
Mobile Number: +91 9900626261
From: Sun, Austin <austin.sun@intel.com>
Sent: Wednesday, September 22, 2021 12:23 PM
To: Shrinidhim, Shrinidhi <Shrinidhi.Shrinidhim@commscope.com>; starlingx-discuss@lists.starlingx.io
Cc: Dharwadkar, Sriram <Sriram.Dharwadkar@commscope.com>; Rai, Ankush <Ankush.Rai@commscope.com>
Subject: RE: PXE-boot error with 5.0 build
Hi Shrinidhi:
Would you like share the HW config details ? such as disk , RAID etc , usually this crash due to hw not supported.
Thanks.
BR
Austin Sun.
From: Shrinidhim, Shrinidhi <Shrinidhi.Shrinidhim@commscope.com>
Sent: Wednesday, September 22, 2021 2:34 PM
To: starlingx-discuss@lists.starlingx.io
Cc: Dharwadkar, Sriram <Sriram.Dharwadkar@commscope.com>; Rai, Ankush <Ankush.Rai@commscope.com>
Subject: Re: [Starlingx-discuss] PXE-boot error with 5.0 build
Hello,
Kindly respond as soon as possible.
Best Regards,
Shrinidhi M
Trainee Engineer
CommScope India Private Limited, Bengaluru.
Mobile Number: +91 9900626261
From: Shrinidhim, Shrinidhi
Sent: Tuesday, September 21, 2021 4:17 PM
To: starlingx-discuss@lists.starlingx.io
Cc: Sriram.Dharwadkar@commscope.com; Rai, Ankush <Ankush.Rai@commscope.com>
Subject: PXE-boot error with 5.0 build
Hi,
We are trying All In One deployment with Dell-R440 servers. The Controller-0 comes-up without any issue but controller-1 failed to PXE boot and the kernel got stuck with kernel crash. Panic Logs are generated in the console.
Kindly check the attachment of different installation stages of controller-1 console and let us know how to resolve this and make controller-1 up.
Best Regards,
Shrinidhi M
Trainee Engineer
CommScope India Private Limited, Bengaluru.
Mobile Number: +91 9900626261