This appears to be the puppet class responsible for that flag file that needs to be created

https://github.com/starlingx/stx-puppet/blob/r/stx.4.0/puppet-manifests/src/modules/openstack/manifests/keystone.pp#L388

 

Check for Error or Warning entries under the various logs under the  /var/log/puppet  folder

 

Al

 

From: Williams, Alexander <Alexander.Williams@commscope.com>
Sent: Tuesday, June 15, 2021 9:24 PM
To: Bailey, Henry Albert (Al) <Al.Bailey@windriver.com>; starlingx-discuss@lists.starlingx.io
Subject: RE: Installation Problem: Configuration failed (Timeout at service endpoints reconfiguration)

 

[Please note: This e-mail is from an EXTERNAL e-mail address]

Hi Bailey,

 

Thanks for the help – I’ve been able to increase the timeout time, but after setting it to timeout after ~5 hours it has not made any progress.

Is there anything in particular in the puppet logs that I should be looking for?

 

Thanks again!

 

Best,

Alex

 

From: Bailey, Henry Albert (Al) <Al.Bailey@windriver.com>
Sent: Tuesday, June 15, 2021 1:33 PM
To: Williams, Alexander <Alexander.Williams@commscope.com>; starlingx-discuss@lists.starlingx.io
Subject: RE: Installation Problem: Configuration failed (Timeout at service endpoints reconfiguration)

 

 

I don’t know if it helps, but that timeout had to be increased to 720 because it took a long time on certain hardware.

See: https://github.com/starlingx/ansible-playbooks/commit/0a1c06a66bc286b306bfdf4ada7cf823787b7a94

 

You may be able to increase the value even more.

The logs under /var/log/puppet should indicate if there was a failure, and if not, may indicate how long it took.

 

Al

 

From: Williams, Alexander <Alexander.Williams@commscope.com>
Sent: Tuesday, June 15, 2021 12:42 PM
To: starlingx-discuss@lists.starlingx.io
Subject: [Starlingx-discuss] Installation Problem: Configuration failed (Timeout at service endpoints reconfiguration)

 

[Please note: This e-mail is from an EXTERNAL e-mail address]

Hi all,

 

I’m in the process of installing StarlingX 4.0.1 as a Bare Metal AIO Duplex for a Central Cloud, and so far have been unable to progress past the ansible bootstrap step, where it fails at the step “Wait for service endpoints reconfiguration to complete”.

I’ve attached the ansible.log from my most recent attempt to help debugging.

If it would help, I can also send the localhost.yml file I’ve been using and the sysinv.log.

 

Thank you in advance for any help you can offer.

 

Best,

Alex