Next thing to check will be if the puppet manifest application failed. I expect if you run “sudo sm-dump”, you’re seeing everything in an “initial” state - if the initial configuration failed, SM is unable to allocate IP addresses and bring up services, which would be why DRBD is not up. You can look at the logs in /var/log/puppet to see what the failure was, if that’s what’s happening (“grep -e Error -e Warning /var/log/puppet/latest/puppet.log”).

 

 

From: 胡天昊 [mailto:hu.tianhao@99cloud.net]
Sent: Saturday, January 18, 2020 9:17 PM
To: Penney, Don
Cc: starlingx-discuss
Subject: Re:RE: [Starlingx-discuss] Drdb fails for AIO Simplex after unlock controller-0

 

Hi Don,

 

Thank you for your reply, this is my override file.

 

system_mode: simplex

 

timezone: UTC

 

dns_servers:

  - 114.114.114.114

  - 8.8.8.8

 

admin_username: admin

admin_password: 99cloud@SH

ansible_become_pass: 99cloud@SH

 

external_oam_subnet: 172.16.140.0/24

external_oam_gateway_address: 172.16.140.1

external_oam_floating_address: 172.16.140.188

 

management_subnet: 192.168.2.0/24

management_start_address: 192.168.2.2

management_end_address: 192.168.2.20

cluster_host_subnet: 192.168.68.0/24

# cluster_host_start_address:

# cluster_host_end_address:

 

docker_registries:

  k8s.gcr.io:

   url: gcr.azk8s.cn/google-containers

  gcr.io:

    url: gcr.azk8s.cn

  quay.io:

    url: quay.azk8s.cn

 

And I'm sure I install StarlingX AIO Simplex, but after unlock controller-0, some pods fails to be up because of drab failed.

 

controller-0:~$ cat /etc/platform/platform.conf

nodetype=controller

subfunction=controller,worker

system_type=All-in-one

security_profile=standard

management_interface=lo

http_port=8080

INSTALL_UUID=7edaf118-e70b-41f9-bfab-562c3219578c

UUID=aef8f074-3bf9-4dea-8e77-9df1d82a1ae0

sdn_enabled=no

region_config=no

system_mode=simplex

sw_version=19.09

security_feature="nopti nospectre_v2"

vswitch_type=none

region_config=False

oam_interface=enp2s1

cluster_host_interface=lo

 

 

 

 

 

Image removed by sender.

 

发件人："Penney, Don" <Don.Penney@windriver.com>
发送日期：2020-01-18 04:06:54
收件人："胡天昊" <hu.tianhao@99cloud.net>,starlingx-discuss <starlingx-discuss@lists.starlingx.io>
主题：RE: [Starlingx-discuss] Drdb fails for AIO Simplex after unlock controller-0

Can you verify you used “system_mode: simplex” in your ansible override? Maybe provide your override file? Can you also do a “cat /etc/platform/platform.conf” and maybe a “system host-show controller-0”?

 

 

From: 胡天昊 [mailto:hu.tianhao@99cloud.net]
Sent: Friday, January 17, 2020 3:48 AM
To: starlingx-discuss
Subject: [Starlingx-discuss] Drdb fails for AIO Simplex after unlock controller-0

 

Hi guys,

 

When I install AIO Simplex following this guide(https://docs.starlingx.io/deploy_install_guides/r3_release/virtual/aio_simplex_install_kubernetes.html), drdb fails after unlock controller-0. It seems that not all lvm are mounted successfully. Can anyone give some advice on this problem?

 

controller-0:~$ drbd-overview
  1:??not-found?? WFConnection Secondary/Unknown UpToDate/DUnknown C r----s
  2:??not-found?? WFConnection Secondary/Unknown UpToDate/DUnknown C r----s
  5:??not-found?? WFConnection Secondary/Unknown UpToDate/DUnknown C r----s
  7:??not-found?? WFConnection Secondary/Unknown UpToDate/DUnknown C r----s
  8:??not-found?? WFConnection Secondary/Unknown UpToDate/DUnknown C r----s

controller-0:~$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 600G 0 disk
├─sda1 8:1 0 1M 0 part
├─sda2 8:2 0 500M 0 part /boot
├─sda3 8:3 0 19.5G 0 part /
├─sda4 8:4 0 229G 0 part
│ ├─cgts--vg-scratch--lv 253:0 0 8G 0 lvm /scratch
│ ├─cgts--vg-log--lv 253:1 0 7.8G 0 lvm /var/log
│ ├─cgts--vg-extension--lv 253:2 0 1G 0 lvm
│ │ └─drbd5 147:5 0 1024M 1 disk
│ ├─cgts--vg-pgsql--lv 253:3 0 20G 0 lvm
│ ├─cgts--vg-docker--lv 253:4 0 30G 0 lvm /var/lib/docker
│ ├─cgts--vg-kubelet--lv 253:5 0 10G 0 lvm /var/lib/kubelet
│ ├─cgts--vg-etcd--lv 253:6 0 5G 0 lvm
│ │ └─drbd7 147:7 0 5G 1 disk
│ ├─cgts--vg-backup--lv 253:7 0 25G 0 lvm /opt/backups
│ ├─cgts--vg-dockerdistribution--lv 253:8 0 16G 0 lvm
│ │ └─drbd8 147:8 0 16G 1 disk
│ ├─cgts--vg-rabbit--lv 253:9 0 2G 0 lvm
│ │ └─drbd1 147:1 0 2G 1 disk
│ ├─cgts--vg-platform--lv 253:10 0 10G 0 lvm
│ │ └─drbd2 147:2 0 10G 1 disk
│ └─cgts--vg-ceph--mon--lv 253:11 0 20G 0 lvm /var/lib/ceph/mon
└─sda5 8:5 0 34G 0 part
sdb 8:16 0 200G 0 disk
├─sdb1 8:17 0 199G 0 part /var/lib/ceph/osd/ceph-0
└─sdb2 8:18 0 1G 0 part
sdc 8:32 0 200G 0 disk
sr0 11:0 1 1.9G 0 rom

Thanks,

Tianhao

 

 

 

Image removed by sender.