Hi Ezpeer,

For the sm.log (/var/log/sm.log), it seems service process fail to run, and lead to sm think system is in unhealthy state, and try to reboot system to recover.

It should be reboot, but not sure why it is shutdown in your environment and also auth.log shows “systemd-logind[893]: info Power key pressed./info Powering Off...

 

In the sm.log, I also see the network adapter is up/down randomly. It may be the cause of the service process failure.

I also find VF Ethernet is enabled in the system also.

To isolate the issue cause, could you help try to disable the VF Ethernet in BIOS, and use PF Ethernet only?

Thanks.

 

 

Best Regards

Shuicheng

 

From: Ezpeer Chen [mailto:ezpeerchen@gmail.com]
Sent: Thursday, June 20, 2019 2:27 PM
To: Lin, Shuicheng <shuicheng.lin@intel.com>
Cc: starlingx-discuss@lists.starlingx.io
Subject: Re: [Starlingx-discuss] STX 1.0 automatically shutdown and power off.

 

Dear Shuicheng,

Platform: STX 1.0 ( http://mirror.starlingx.cengn.ca/mirror/starlingx/r2018.10/centos/latest_build/outputs/iso/)

 

1.  bare-metal system ,  MY host pc Controller-0 shutdown without reboot

2.  provisioned system  , all-in-one simplex

3.  collet cmd log file:

     https://drive.google.com/open?id=1D7yw_IiCPrDBCn6GmPK1GDC7FAdo5Wcr

 

Thanks for your help.



Best Regards 

 

Lin, Shuicheng <shuicheng.lin@intel.com> 2019620 週四 下午1:56寫道:

Hi Ezpeer,

Is it virtual machine or bare-metal system?

Is it a provisioned system? And what is the system configuration, simplex/duplex or multi node?

StarlingX itself will not do auto-shutdown, but it may auto-reboot if there is critical error.

Most of StarlingX’s log is at /var/log folder.

 

You could run “collect” cmd in your fail system after the issue occur, and upload the generated logfile to somewhere others could access.

Then I will have a check with it.

 

Best Regards

Shuicheng

 

From: Ezpeer Chen [mailto:ezpeerchen@gmail.com]
Sent: Thursday, June 20, 2019 11:41 AM
To: starlingx-discuss@lists.starlingx.io
Subject: [Starlingx-discuss] STX 1.0 automatically shutdown and power off.

 

Dear all,

My STX 1.0 will be automatically shutdown and power off.

Where could i check the logs about this issue?


Thanks a lot.