I am using the build centos-20190206T060000Z. The main problem, beside of the noise is, that the system comes up and reboots immediately again.
"Penney, Don" <Don.Penney@windriver.com> hat am 13. Februar 2019 um 17:41 geschrieben:
Yes, this is the correct behavior.
As for the drbd warnings, there are some state change failures that occur as the system shuts down, but aren't a problem (aside from the noise). I've managed to clean up most of these in a recent update. What build are you using?
-----Original Message----- From: Marcel Schaible [mailto:marcel@schaible-consulting.de] Sent: Wednesday, February 13, 2019 11:28 AM To: starlingx-discuss@lists.starlingx.io Subject: [Starlingx-discuss] Duplex Configuration: Unlock of controller-0 causes reboot
Hi,
when I unlock the controller-0 after installation following this tutorial
https://docs.starlingx.io/installation_guide/duplex.html#duplex
the system is rebooting automatically with a lot of errors from drdb.
Controller-1 is not configured at this point in time.
Must I configure the secondary controller before unlocking controller-0?
Thanks
Marcel
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss