Hi,
Seems that the issue is still present on the last CENGN ISO:
http://mirror.starlingx.cengn.ca/mirror/starlingx/master/centos/latest_build/outputs/iso/
Can you help me to verify if patches were integrated on the ISO?
Regards.
Juan Carlos Alonso
I've updated the build scripts at CENGN. We were still using the -0.2 qualified names at one point in the scripts.
The next build should rebuild pxe-network-installer with the the correct kernel and ram disk.
Scott
On 2019-01-03 3:59 p.m., Penney, Don wrote:
I’ve downloaded the CENGN ISO from:
http://mirror.starlingx.cengn.ca/mirror/starlingx/master/centos/latest_build/outputs/iso/
and it does not contain the installer patches. However, the installer image here is patched:
http://mirror.starlingx.cengn.ca/mirror/starlingx/master/centos/latest_build/outputs/installer/
We’ll have to look at the build to see what’s going on here.
From: Alonso, Juan Carlos [mailto:juan.carlos.alonso@intel.com]
Sent: Thursday, January 03, 2019 3:18 PM
To: Penney, Don; starlingx
Subject: RE: STX install_state status
Thank You for your help,
I am using the latest ISO from CENGN and has the same issue.
Do you know if there is a Launchpad already open for this issue?
Regards.
Juan Carlos Alonso
From: Penney, Don [mailto:Don.Penney@windriver.com]
Sent: Thursday, January 3, 2019 2:06 PM
To: Alonso, Juan Carlos <juan.carlos.alonso@intel.com>; starlingx <starlingx-discuss@lists.starlingx.io>
Subject: RE: STX install_state status
Please see my reply (attached) to the thread “the install progress information has missing when install computer node , storage node, and new controller node”. In particular, please check that your installer has the required patch. If you’re using a stock CentOS installer image, you will not get the install-state notifications.
Cheers,
Don.
From: Alonso, Juan Carlos [mailto:juan.carlos.alonso@intel.com]
Sent: Thursday, January 03, 2019 3:00 PM
To: starlingx
Subject: [Starlingx-discuss] STX install_state status
Hi,
Do someone have faced an issue with install states status when a new host is added?
During controller, compute or storage host installation:
system host-show controller-1 | grep install
| install_output | text
| install_state | None
| install_state_info | None
During installation several values should be showed as pre-install, installing, completed. At the end of installation the output must be install_state = completed.
Regards.
Juan Carlos Alonso
_______________________________________________Starlingx-discuss mailing listStarlingx-discuss@lists.starlingx.iohttp://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss