Hi Jaewook:

     1. could you share the hw info for controller-1 ?   and check bios setting ?  is it using UEFI ?  VTx/Iommu  enable or not ?

     2. Could you try access controller-1 and press Alt+F10 to see any log if the system is bare metal ?

Thanks.

BR
Austin Sun.

From: Jaewook Oh [mailto:kyle.oh95@gmail.com]
Sent: Friday, February 22, 2019 2:54 PM
To: starlingx-discuss <starlingx-discuss@lists.starlingx.io>
Subject: [Starlingx-discuss] Duplex PXE Booting seems failed

Hello StarlingX Team,

I finally solved the horizon error, the port number was different.

I don't know why the port was changed, but anyway the port number was 8080, not 80.

But I'm now facing new obstacles, Duplex PXE Booting.

I succeed to connect PXE mode, but no more process..

In Controller-0, I can find below result,

And another node that should've been controller-1, shows below letters on the display.

1) All-in-one

Loading rel-19.01/installer-bzImage.........

Loading rel-19.01/installer-initrd............................................................................ready.

I waited this task for a day, but no changes.

Any help would be very appreciated.

Best Regards,

Jaewook.

================================================
Jaewook Oh (오재욱)
IISTRC - Internet Infra System Technology Research Center
369 Sangdo-ro, Dongjak-gu,
06978, Seoul, Republic of Korea