Yong's suggestion to check the server's BMC settings is good. Some servers such as Dell, have an 'Enable IPMI over LAN setting. Do you see a BMC access alarm ?
fm alarm-list
Try to ping the target server BMC. If that works then I suggest you try and read the sensors manually using ipmitool. ipmitool -I lanplus -H <ip address> -U <username> -P <password> sensor list If a list of sensors is displayed and you can't see the sensor list with 'system host-sensor-list' then 1. Inspect recent logs in /var/log/mtcAgent.log and var/log/hwmond.log looking for logs that pertain to BMC accesses. 2. Check that your provisioned username, ip address and password are correct. Try deprovisioning and reprovisioning the BMC. > system host-update <hostname> bm_type=none And then provision again ensuring the credentials are correct. Wait 5-10 minutes Tail mtcAgent and hwmond.log files. If there is a failure the logs will help us narrow in on the issue. 3. Provide output of the following commands cat /var/run/bmc/* ls -r /var/run/bmc/* 4. Ideally compress and attach the mtcAgent.log file Eric. -----Original Message----- From: Yong Hu [mailto:yong.hu@intel.com] Sent: Sunday, November 10, 2019 8:27 PM To: Alonso, Juan Carlos; Chen, Yan; starlingx-discuss@lists.starlingx.io Cc: Cabrales, Ada Subject: Re: [Starlingx-discuss] Train patch elimination JC, Have you enabled BMC config in your test servers and BIOS? If so, please use "ipmitool" utility to have a try to read sensor info. regards, Yong On 2019/11/8 11:29 PM, Alonso, Juan Carlos wrote:
Hello Yan/community,
Any update on this? (:
Regards.
Juan Carlos Alonso
*From:* Alonso, Juan Carlos *Sent:* Thursday, November 7, 2019 9:56 AM *To:* Chen, Yan <yan.chen@intel.com>; Hu, Yong <yong.hu@intel.com>; Gerry.Kopec@windriver.com; starlingx-discuss@lists.starlingx.io *Cc:* Cabrales, Ada <ada.cabrales@intel.com> *Subject:* RE: Train patch elimination
Hello Yan,
Thank you for your response.
Same question now for:
_Horizon/Custom Confirmation Messages : Custom confirmation message for Suppress Sensor Group, Relearn Sensor Model and Suppress Sensor._
I added the bmc_ip, bmc_type, bmc_username and bmc_password for each node, but I cannot display any sensors on Horizon nor CLI.
$ system host-update compute-0 bm_username=<user_name> bm_password=<password> bm_type=bmc bm_ip=<bmc_ip>
$ system host-lock compute-0
$ system host-sensor-list compute-0
<none>
$ system host-unlock compute-0
$ system host-sensor-list compute-0
<none>
Is there any other configuration needed or is this feature not supported anymore?
Regards.
Juan Carlos Alonso
*From:* Chen, Yan <yan.chen@intel.com <mailto:yan.chen@intel.com>> *Sent:* Thursday, November 7, 2019 12:15 AM *To:* Alonso, Juan Carlos <juan.carlos.alonso@intel.com <mailto:juan.carlos.alonso@intel.com>>; Hu, Yong <yong.hu@intel.com <mailto:yong.hu@intel.com>>; Gerry.Kopec@windriver.com <mailto:Gerry.Kopec@windriver.com>; starlingx-discuss@lists.starlingx.io <mailto:starlingx-discuss@lists.starlingx.io> *Cc:* Cabrales, Ada <ada.cabrales@intel.com <mailto:ada.cabrales@intel.com>> *Subject:* RE: Train patch elimination
Carlos,
Please remove _Horizon/CSRF AngularJS Fixes_ related cases in your test plan, which are originally planned for STX additional patches, as those patches are already removed from our project and not upstreamed.
Yan
*From:* Alonso, Juan Carlos <juan.carlos.alonso@intel.com <mailto:juan.carlos.alonso@intel.com>> *Sent:* Wednesday, November 6, 2019 23:18 *To:* Hu, Yong <yong.hu@intel.com <mailto:yong.hu@intel.com>>; Chen, Yan <yan.chen@intel.com <mailto:yan.chen@intel.com>>; Gerry.Kopec@windriver.com <mailto:Gerry.Kopec@windriver.com>; starlingx-discuss@lists.starlingx.io <mailto:starlingx-discuss@lists.starlingx.io> *Cc:* Cabrales, Ada <ada.cabrales@intel.com <mailto:ada.cabrales@intel.com>> *Subject:* RE: Train patch elimination
Hello,
I hope also the community can help with this questions.
@Chen, Yan <mailto:yan.chen@intel.com>
Can you help me to verify if this feature is still disabled on Train version: _Horizon/CSRF AngularJS Fixes_?
On last test plan for Stein this feature was no longer required on Horizon and was disabled on SarlingX code.
@Gerry.Kopec@windriver.com <mailto:Gerry.Kopec@windriver.com>
About the Live Migration bugs I mentioned on the last meeting, almost all of them are merged, except the last three.
All those patches are related to live migration, so my question is if I perform live migrations such patches will be covered or should be tested in a different way?
The last three were marked as Unlikely and was not merged on Stein. I don’t have more info about such patches.
Enable delete bound trunk for linux bridge agent: https://review.opendev.org/#/c/605589
0040-rpc-removing-timeout-backoff-multiplier.patch (2e4ca00): https://review.opendev.org/#/c/623401 and https://review.opendev.org/#/c/626109
0062-dvr-force-admin-state-update-before-distri.patch (edf9731): https://review.opendev.org/#/c/625134
0065-dvr-do-not-create-agent-gateway-ports-unle.patch (2857911): https://review.opendev.org/#/c/628071
0077-api-reject-routes-with-invalid-network-val.patch (6ed8fe6): https://review.opendev.org/#/c/623415
0014-add-support-for-querying-quotas-with-usage.patch (71c07d7): _https://review.opendev.org/#/c/621507/_
Prevent DHCP from processing stale RPC messages: ??
0039-dhcp-handle-concurrent-port-creation-error.patch (a38f89): ??
0047-wsgi-prevent-accepting-socket-without-a-gr.patch (8e72491): ??
Regards.
Juan Carlos Alonso
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss