Hi Huang:
Yes. you are right .
Thanks.
BR
Austin Sun.
From: CH.Huang789 <ch.huang789@advantech.com.tw>
Sent: Thursday, December 17, 2020 9:19 AM
To: CH.Huang789 <ch.huang789@advantech.com.tw>; Sun, Austin <austin.sun@intel.com>; starlingx-discuss@lists.starlingx.io
Subject: RE: [Starlingx-discuss] stx 4.0 Simple-AIO-DX can not get the IP host on controller-1
Hi Austin:
I think I found the cause is that I should set both controllers’s eno1/eno2 as the same datanetwork type, class and vlan.
Please correct me if I am wrong.
From: CH.Huang789 <ch.huang789@advantech.com.tw>
Sent: Wednesday, December 16, 2020 6:01 PM
To: Sun, Austin <austin.sun@intel.com>;
starlingx-discuss@lists.starlingx.io
Subject: Re: [Starlingx-discuss] stx 4.0 Simple-AIO-DX can not get the IP host on controller-1
Dear Austin:
Datanetwork NIC on controller-0 and controller-1 connected to each other.
From: Sun, Austin <austin.sun@intel.com>
Sent: Wednesday, December 16, 2020 5:58 PM
To: CH.Huang789 <ch.huang789@advantech.com.tw>;
starlingx-discuss@lists.starlingx.io
Subject: RE: [Starlingx-discuss] stx 4.0 Simple-AIO-DX can not get the IP host on controller-1
Hi Huang:
are datanetwork NIC on controller-0 and controller-1 connected to each other or in same switch/network ?
Thanks.
BR
Austin Sun.
From: CH.Huang789 <ch.huang789@advantech.com.tw>
Sent: Tuesday, December 15, 2020 4:09 PM
To: Sun, Austin <austin.sun@intel.com>;
starlingx-discuss@lists.starlingx.io
Subject: RE: [Starlingx-discuss] stx 4.0 Simple-AIO-DX can not get the IP host on controller-1
Hi Austin:
I loop back eno2 for these 2 servers. Yes, it link up on controller-1.
[sysadmin@controller-0 ~(keystone_admin)]$ system host-if-list controller-1
+--------------------------------------+-------+----------+----------+---------+-----------+----------+-------------+---------------------------+
| uuid | name | class | type | vlan id | ports | uses i/f | used by i/f | attributes
|
+--------------------------------------+-------+----------+----------+---------+-----------+----------+-------------+---------------------------+
| 5cda648c-1c8e-4acc-8661-d8cc10b6f790 | eno7 | platform | ethernet | None | [u'eno7'] | [] | [] | MTU=1500
|
| 811ec9ed-cbdc-40ec-b18d-82dd54ad40c5 | data0 | data | ethernet | None | [u'eno2'] | [] | [] | MTU=1500,accelerated=True
|
| b421709e-3048-44e7-b91f-aeb7de3dac0f | eno5 | platform | ethernet | None | [u'eno5'] | [] | [] | MTU=1500
|
+--------------------------------------+-------+----------+----------+---------+-----------+----------+-------------+---------------------------+
[sysadmin@controller-0 ~(keystone_admin)]$ ssh controller-1
controller-1:~$ ip link show eno2
3: eno2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master ovs-system state UP mode DEFAULT group default qlen 1000
link/ether 00:d0:c9:cc:33:1d brd ff:ff:ff:ff:ff:ff
From: Sun, Austin <austin.sun@intel.com>
Sent: Tuesday, December 15, 2020 3:59 PM
To: CH.Huang789 <ch.huang789@advantech.com.tw>;
starlingx-discuss@lists.starlingx.io
Subject: RE: [Starlingx-discuss] stx 4.0 Simple-AIO-DX can not get the IP host on controller-1
Hi Huang:
Would you check ?
system host-if-list controller-1 ?
and the NIC assigned as data network in controller-1 is up ?
Thanks.
BR
Austin Sun.
From: CH.Huang789 <ch.huang789@advantech.com.tw>
Sent: Tuesday, December 15, 2020 10:49 AM
To: starlingx-discuss@lists.starlingx.io
Subject: [Starlingx-discuss] stx 4.0 Simple-AIO-DX can not get the IP host on controller-1
Dear Sir:
I follow the instruction to setup the StarlingX 4.0 on 2 bare metal machine with Simple AIO DX.
I create one network and two cirros VM. One VM (vm0) host in controller-0, the other VM (vm1) host in controller-1.
Everything looks fine on OpenStack Web UI. Each VM assigned a IP address. But only vm0 get the IP address. The vm1 do not have a IP address. Can someone help me on it?
vm0: (controller-0):
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether fa:16:3e:e5:76:e3 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.28/24 brd 192.168.0.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::f816:3eff:fee5:76e3/64 scope link
valid_lft forever preferred_lft forever
vm1: (controller-1):
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether fa:16:3e:15:55:de brd ff:ff:ff:ff:ff:ff
inet6 fe80::f816:3eff:fe15:55de/64 scope link
valid_lft forever preferred_lft forever
[sysadmin@controller-0 ~(keystone_admin)]$ openstack network show public-net01
+---------------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| Field | Value
|
+---------------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| admin_state_up | UP |
| availability_zone_hints | nova |
| availability_zones | nova
|
| created_at | 2020-12-14T15:42:18Z
|
| description | |
| dns_domain | None |
| id | 81decfb7-ee67-466d-b644-e71d5a2b04db
|
| ipv4_address_scope | None
|
| ipv6_address_scope | None |
| is_default | False |
| is_vlan_transparent | False
|
| location | cloud='', project.domain_id=, project.domain_name='Default', project.id='6a2e43c744e24df89214ae72577d3ca6', project.name='admin',
region_name='RegionOne', zone= |
| mtu | 1500 |
| name | public-net01 |
| port_security_enabled | True
|
| project_id | 6a2e43c744e24df89214ae72577d3ca6
|
| provider:network_type | vlan |
| provider:physical_network | physnet0 |
| provider:segmentation_id | 1000
|
| qos_policy_id | None
|
| revision_number | 4 |
| router:external | External |
| segments | None
|
| shared | True
|
| status | ACTIVE |
| subnets | d724cdfb-11c2-4509-805a-cf45a62fe569 |
| tags |
|
| updated_at | 2020-12-14T15:57:26Z
|
+---------------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------+
Regards,
C.H. Huang
Technical
Service for Advantech Cloud-IoT
