stx/update/extras/scripts/patch_build.sh --id <patch_name> --release <sw_release> --reboot-required <Y|N> --summary <summary> <where-to-install> <rpm> <sw_release> = can be found under /etc/build.info on your controller. probably one of ... stx 7 = 22.06 stx 6 = 21.12 <where-to-install> is some combination of ... --controller <rpm> New package for controller --worker <rpm> New package for worker node --worker-lowlatency <rpm> New package for worker-lowlatency node --storage <rpm> New package for storage node --controller-worker <rpm> New package for combined node --controller-worker-lowlatency <rpm> New package for lowlatency combined node --all-nodes <rpm> New package for all node types On 2023-03-08 09:18, Bailey, Henry Albert (Al) wrote:
I think if you have the rpm already pre-built, you can probably bypass building StarlingX and just try to run the patch-build command
You just need to make sure the tool can find the rpm.
Someone else on this channel might have info about the build problems and environment setup
Al
*From:* LiuYongfu <114769003@qq.com> *Sent:* Wednesday, March 8, 2023 7:08 AM *To:* Bailey, Henry Albert (Al) <Al.Bailey@windriver.com>; starlingx-discuss <starlingx-discuss@lists.starlingx.io> *Subject:* Re：RE: [Starlingx-discuss] how to install my own rpm
*CAUTION: This email comes from a non Wind River email account!* Do not click links or open attachments unless you recognize the sender and know the content is safe.
Hi，
thanks very much . so I need to make a pach and install it . my first step is to build the starlingx .when I build this. It has some problems as below:
could you please help me ? thanks very much.
------------------------------------------------------------------------
Image removed by sender.
LiuYongfu
114769003@qq.com
Original
From:"Bailey, Henry Albert (Al)"< Al.Bailey@windriver.com >;
Date:2023/2/18 5:05
To:"LiuYongfu"< 114769003@qq.com >;"starlingx-discuss"< starlingx-discuss@lists.starlingx.io >;
Subject:RE: [Starlingx-discuss] how to install my own rpm
With StarlingX, the way to add an rpm to the platform is through a patch.
Within the StarlingX patching system it will install the rpm, and will prevent it from being removed by a reboot.
There is a video from the Open Infrastructure Foundation that shows an example of creating your own patch to allow an rpm to be installed. It uses the patch_build.sh <https://urldefense.com/v3/__http:/patch_build.sh__;!!AjveYdw8EvQ!fJfSLJYP1YcZ5YQQYf1WMuBson7TGFUBOC76OcjDZ0tSBLFo2uDFIYULDf0SN_hGP_qb9o_8G1FS32Fr3Wg$> command
https://www.youtube.com/watch?v=vwqhxpgaxXE <https://urldefense.com/v3/__https:/www.youtube.com/watch?v=vwqhxpgaxXE__;!!AjveYdw8EvQ!fJfSLJYP1YcZ5YQQYf1WMuBson7TGFUBOC76OcjDZ0tSBLFo2uDFIYULDf0SN_hGP_qb9o_8G1FSRIDIU8M$>
For example, if I wanted to add an RPM for pyflame my patch_build.sh syntax would look something like this:
*/# Run this script from within $MY_WORKSPACE/*
*/PATH=$MY_REPO/stx/update/extras/scripts:$PATH/*
*/PATCH_ID=PYFLAME/*
*/DIR=std/rpmbuild/RPMS/*
*/PYFLAME=pyflame-1.6.6-4.el7.tis.1.x86_64.rpm/*
*//*
*/patch_build.sh <https://urldefense.com/v3/__http:/patch_build.sh__;!!AjveYdw8EvQ!fJfSLJYP1YcZ5YQQYf1WMuBson7TGFUBOC76OcjDZ0tSBLFo2uDFIYULDf0SN_hGP_qb9o_8G1FS32Fr3Wg$> \/*
*/--id ${PATCH_ID} \/*
*/--reboot-required=Y \/*
*/--summary "New pyflame rpm " \/*
*/--desc "Adds a new pyflame rpm "\/*
*/--controller ${DIR}/${PYFLAME} \/*
*/--controller-worker ${DIR}/${PYFLAME} \/*
*/--controller-worker-lowlatency ${DIR}/${PYFLAME}/*
Be aware that in this example, I am ‘adding’ an rpm rather than updating one, so I needed to include special fields
(--controller , --controller-worker , --controller-worker-lowlatency ) so that the platform knows that the rpm belongs on controller and AIO hosts (and in this example it will not install it on worker or storage nodes)
The video (and my example) assume you have a development environment setup with your variables, etc.. already defined. If that is not the case, you may need to ensure you have the starlingx/update repo checked out and make the appropriate changes to the commands.
Al
*From:* LiuYongfu <114769003@qq.com> *Sent:* Saturday, February 11, 2023 5:52 AM *To:* starlingx-discuss <starlingx-discuss@lists.starlingx.io> *Subject:* [Starlingx-discuss] how to install my own rpm
*CAUTION: This email comes from a non Wind River email account!* Do not click links or open attachments unless you recognize the sender and know the content is safe.
Brief Description -----------------
when I install my private(own) rpm to the compute node. when the node is restarted .my private rpm is deleted. so I want to know : are there some ways to install my own rpm on compute nodes or is it just a bug?
Steps to Reproduce ------------------ I installed my GPU rpm packages on the compute node,and it worked right.
Expected Behavior ------------------
the rpm packages works correctly all the time.
Actual Behavior when reboot the compute nodes .my gpu rpm packages are removed by the system.
thanks very much.
LiuYongfu
114769003@qq.com
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io
