_______________________________________________Hi Jaewook:
1. could you share the hw info for controller-1 ? and check bios setting ? is it using UEFI ? VTx/Iommu enable or not ?
2. Could you try access controller-1 and press Alt+F10 to see any log if the system is bare metal ?
Thanks.
BR
Austin Sun.From: Jaewook Oh [mailto:kyle.oh95@gmail.com]
Sent: Friday, February 22, 2019 2:54 PM
To: starlingx-discuss <starlingx-discuss@lists.starlingx.io>
Subject: [Starlingx-discuss] Duplex PXE Booting seems failed
Hello StarlingX Team,
I finally solved the horizon error, the port number was different.
I don't know why the port was changed, but anyway the port number was 8080, not 80.
But I'm now facing new obstacles, Duplex PXE Booting.
I succeed to connect PXE mode, but no more process..
In Controller-0, I can find below result,
And another node that should've been controller-1, shows below letters on the display.
1) All-in-one
Loading rel-19.01/installer-bzImage.........
Loading rel-19.01/installer-initrd............................................................................ready.
I waited this task for a day, but no changes.
Any help would be very appreciated.
Best Regards,
Jaewook.
================================================
Jaewook Oh (오재욱)
IISTRC - Internet Infra System Technology Research Center
369 Sangdo-ro, Dongjak-gu,
06978, Seoul, Republic of Korea
Starlingx-discuss mailing list
Starlingx-discuss@lists.starlingx.io
http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
================================================
Jaewook Oh (오재욱)
IISTRC - Internet Infra System Technology Research Center
369 Sangdo-ro, Dongjak-gu,
06978, Seoul, Republic of Korea
Tel : +82-2-820-0841 | Mobile : +82-10-9924-2618
E-mail : jwoh95@dcn.ssu.ac.kr
================================================