You can set the console either via the web browser in the installation parameters, or at command-line, such as:
system host-update 2 personality=controller console=
The default is the serial console, “ttyS0,115200”. If you’re using a graphical console, you can set it blank, or console=tty0, for example. This should allow you to see if there are some errors occurring trying
to load the installer.
From: Lin, Shuicheng [mailto:shuicheng.lin@intel.com]
Sent: Tuesday, April 30, 2019 1:03 AM
To: starlingx-discuss@lists.starlingx.io
Subject: [Starlingx-discuss] 2nd node stuck at pxe installation
Hi all,
I try to do duplex deploy, and find controller-1 stuck at pxe installation step.
The screen stuck at “Loading rel-19.01/installer-initrd………..ready”. But package installation is not started as host-show command shown in controller-0.
I meet this issue with latest code. Do you know what cause the issue, or how to debug it?
Thanks.
[wrsroot@controller-0 ~(keystone_admin)]$ system host-list
+----+--------------+-------------+----------------+-------------+--------------+
| id | hostname | personality | administrative | operational | availability |
+----+--------------+-------------+----------------+-------------+--------------+
| 1 | controller-0 | controller | unlocked | enabled | available |
| 2 | controller-1 | controller | locked | disabled | offline |
+----+--------------+-------------+----------------+-------------+--------------+
[wrsroot@controller-0 ~(keystone_admin)]$ system host-show controller-1 | grep install
| install_output | text |
| install_state | None |
| install_state_info | None |
| subfunction_avail | not-installed
Best Regards
Shuicheng