build instructions: https://docs.starlingx.io/developer_guide/ (2018-11-02) install instruction: https://docs.starlingx.io/installation_guide/dedicated_storage.html#dedicate... the installation runs without problems, only at the very end the unlocking of the compute-nodes ends in said endless loop. here are the last ~500kb of puppet.log from the compute-node: https://pastebin.com/wsSUY741 it seems that there are problems with the network interface eno1. the output of "ip a" only shows eno2, eno1 is not started. did i understand correctly that the "data" interface at the compute-nodes is the interface via which the "provider-networks" can be reached (via VLAN) ? i refer to this line from the doku: system host-if-modify -p providernet-a -c data compute-0 eno1 here is an overview of my network, basically very primitive and i think also in the sense of starlingX/openstack quite classic. https://docdro.id/0CRp2OA i am grateful for any help! Volker... -----Ursprüngliche Nachricht----- Von: Michel Thebeau [mailto:michel.thebeau@windriver.com] Gesendet: Donnerstag, 1. November 2018 17:29 An: von Hoesslin, Volker; 'starlingx-discuss@lists.starlingx.io' Betreff: Re: [Starlingx-discuss] Compute boot-loop Hi Volker, Could you describe the instructions you were using to setup startlingx (were you following a wiki online)? Did you recheck the instructions versus what is actually configured on the computes? How many cpus do your computes have? Which build are you using? Did you build your own? When reboot-loop happens on a node often the error will be presented on the console during boot or could be inferred from console, sometimes referring to puppet logs of the node /var/log/puppet/ M On 2018-11-01 6:45 a.m., von Hoesslin, Volker wrote:
Hello, there, i have now built a complete stack and believe i did everything right. after unlocking the compute nodes (two pieces), the nodes come into an endless boot loop. Error messages are not really noticeable, except: compute-X 'ceilometer-polling' process has failed. Auto recovery in progress
any suggestions? Greez & thx, volker...
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss