Hi Jaewook: Could you run ‘system host-list’ or ‘system host-show controller-1’ to see the status of controller-1? Is it available degrade or others ? Thanks. BR Austin Sun. From: 오재욱 [mailto:kyle.oh95@gmail.com] Sent: Tuesday, March 26, 2019 10:59 AM To: starlingx-discuss <starlingx-discuss@lists.starlingx.io> Subject: [Starlingx-discuss] Fwd: [starlingx-discuss] [critical error after deployment] About "persistent critical 'Management Network'" ---------- Forwarded message --------- 보낸사람: 오재욱 <kyle.oh95@gmail.com<mailto:kyle.oh95@gmail.com>> Date: 2019년 3월 26일 (화) 오전 11:58 Subject: Re: [Starlingx-discuss] [starlingx-discuss] [critical error after deployment] About "persistent critical 'Management Network'" To: Hu, Yong <yong.hu@intel.com<mailto:yong.hu@intel.com>> Hi Yong, Umm I think the controller0 was completely installed, but the controller1 was not. When I unlocked the controller1, fm alarm shows the error. So it does mean the controller1 was not completely installed. If so, do you think there is a reason for the installation not being completed elsewhere? Thank you for help, BR, Jaewook. 2019년 3월 26일 (화) 오전 11:53, Hu, Yong <yong.hu@intel.com<mailto:yong.hu@intel.com>>님이 작성: Have you installed 2 controllers already? If by far you only setup 1 controller, this alarm seems reasonable because it expects to communicate with another controller through mgt network. Regards, Yong From: 오재욱 <kyle.oh95@gmail.com<mailto:kyle.oh95@gmail.com>> Date: Tuesday, 26 March 2019 at 10:45 AM To: starlingx-discuss <starlingx-discuss@lists.starlingx.io<mailto:starlingx-discuss@lists.starlingx.io>> Subject: [Starlingx-discuss] [starlingx-discuss] [critical error after deployment] About "persistent critical 'Management Network'" Hello StarlingX Teams, I finally deployed duplex starlingx model on two physical servers. However, it was not truly deployed. The "all-in-one controller-1" has deploy failed, The fault management alarm shows, 200.005 Failure: <hostname> is experiencing a persistent critical 'Management Network' communication failure." And I think above fault is the main reason of deploy failed I followed BIOS Setup for all nodes, and used Feb 22 iso images. I have no idea what can I do :( Any help would be very appreciated. Best Regards, Jaewook. ================================================ Jaewook Oh (오재욱) IISTRC - Internet Infra System Technology Research Center 369 Sangdo-ro, Dongjak-gu, 06978, Seoul, Republic of Korea -- ================================================ Jaewook Oh (오재욱) IISTRC - Internet Infra System Technology Research Center 369 Sangdo-ro, Dongjak-gu, 06978, Seoul, Republic of Korea