Thanks for Eric's hint. I doubted this problem is related to OVS bridge setup yesterday
controller-0:/var/log/puppet# ovs-vsctl show
a98562f6-3223-4eab-a663-68cb4d8e9ece
Manager "ptcp:6639:127.0.0.1"
is_connected: true
Bridge "br-phy0"
Controller "tcp:127.0.0.1:6633"
is_connected: true
fail_mode: secure
Port "lldpd2a87771-fd"
Interface "lldpd2a87771-fd"
type: internal
Port "phy-br-phy0"
Interface "phy-br-phy0"
type: patch
options: {peer="int-br-phy0"}
Port "eth0"
Interface "eth0"
type: dpdk
options: {dpdk-devargs="0000:02:00.1", n_rxq="1"}
error: "Error attaching device '0000:02:00.1' to DPDK"
Port "br-phy0"
Interface "br-phy0"
type: internal
Bridge br-int
Controller "tcp:127.0.0.1:6633"
is_connected: true
fail_mode: secure
Port "int-br-phy0"
Interface "int-br-phy0"
type: patch
options: {peer="phy-br-phy0"}
Port br-int
Interface br-int
type: internal
ovs_version: “2.9.0"
I don’t know why ‘eth0’ was added into the br-phy0 bridge, since there is no ‘eth0’ in my machine. I configured an interface named ‘eno4’ for my data plane.
[wrsroot@controller-0 log(keystone_admin)]$ system host-if-list -a 1
+--------------------------------------+------+----------+----------+---------+-----------+----------+-------------+----------------------------+-------------------+
| uuid | name | class | type | vlan id | ports | uses i/f | used by i/f | attributes | provider networks |
+--------------------------------------+------+----------+----------+---------+-----------+----------+-------------+----------------------------+-------------------+
| 548477c1-038f-4280-a4b1-d7c11d724b09 | eno4 | data | ethernet | None | [u'eno4'] | [] | [] | MTU=1500,accelerated=False | providernet-a |
| 5c4760f5-a32b-49b9-91d1-73a72fdcabfb | eno3 | None | ethernet | None | [u'eno3'] | [] | [] | MTU=1500 | None |
| 7b85e213-f435-4693-a13a-364de1e06a35 | eno1 | platform | ethernet | None | [u'eno1'] | [] | [] | MTU=1500 | None |
| 96e1e865-2f7c-486e-8e9e-88fcb1c71686 | lo | platform | virtual | None | [] | [] | [] | MTU=1500 | None |
| c87ccb52-a1c7-4332-87f9-5966e6599ee6 | eno2 | None | ethernet | None | [u'eno2'] | [] | [] | MTU=1500 | None |
+--------------------------------------+------+----------+----------+---------+-----------+----------+-------------+----------------------------+—————————+
And also the puppet log seems confirm that ovs setup failure because of ‘eth0':
controller-0:/var/log/puppet# grep -r /var/log/puppet/ -e Error -e Warning
/var/log/puppet/2018-12-03-08-05-45_compute/puppet.log:2018-12-03T08:07:16.348 Notice: 2018-12-03 16:07:16 +0800 /Stage[main]/Platform::Vswitch::Ovs/Platform::Vswitch::Ovs::Port[eth0]/Exec[ovs-add-port: eth0]/returns: ovs-vsctl: Error detected while setting up 'eth0': Error attaching device '0000:02:00.1' to DPDK. See ovs-vswitchd log for details.
/var/log/puppet/2018-12-03-08-05-45_compute/puppet.log:2018-12-03T08:07:16.443 Error: 2018-12-03 16:07:16 +0800 ovs-ofctl add-flow br-phy0 dl_dst=01:80:c2:00:00:0e,dl_type=0x88cc,hard_timeout=0,idle_timeout=0,in_port=eth0,actions=output:lldpd2a87771-fd returned 1 instead of one of [0]
/var/log/puppet/2018-12-03-08-05-45_compute/puppet.log:2018-12-03T08:07:16.678 Error: 2018-12-03 16:07:16 +0800 /Stage[main]/Platform::Vswitch::Ovs/Platform::Vswitch::Ovs::Flow[eth0]/Exec[ovs-add-flow: eth0]/returns: change from notrun to 0 failed: ovs-ofctl add-flow br-phy0 dl_dst=01:80:c2:00:00:0e,dl_type=0x88cc,hard_timeout=0,idle_timeout=0,in_port=eth0,actions=output:lldpd2a87771-fd returned 1 instead of one of [0]
/var/log/puppet/2018-12-03-08-05-45_compute/puppet.log:2018-12-03T08:07:28.800 Warning: 2018-12-03 16:07:28 +0800 /Stage[post]/Platform::Ceph::Post/File[/var/run/.ceph_started]: Skipping because of failed dependencies
/var/log/puppet/2018-12-03-08-05-45_compute/puppet.log:2018-12-03T08:07:28.806 Warning: 2018-12-03 16:07:28 +0800 /Stage[post]/Platform::Config::Post/Service[crond]: Skipping because of failed dependencies
/var/log/puppet/2018-12-03-08-05-45_compute/puppet.log:2018-12-03T08:07:28.817 Warning: 2018-12-03 16:07:28 +0800 /Stage[post]/Platform::Config::Compute::Post/File[/etc/platform/.initial_compute_config_complete]: Skipping because of failed dependencies
/var/log/puppet/2018-12-03-08-05-45_compute/puppet.log:2018-12-03T08:07:28.824 Warning: 2018-12-03 16:07:28 +0800 /Stage[post]/Platform::Config::Compute::Post/File[/var/run/.compute_config_complete]: Skipping because of failed dependencies
/var/log/puppet/2018-12-03-08-05-45_compute/puppet.log:2018-12-03T08:07:28.833 Warning: 2018-12-03 16:07:28 +0800 /Stage[post]/Platform::Config::Post/File[/etc/platform/.initial_config_complete]: Skipping because of failed dependencies
/var/log/puppet/2018-12-03-08-05-45_compute/puppet.log:2018-12-03T08:07:28.839 Warning: 2018-12-03 16:07:28 +0800 /Stage[post]/Platform::Config::Post/File[/etc/platform/.config_applied]: Skipping because of failed dependencies
Any further suggestion how to fix this problem? Thank you.
Br,
Xu Yun
300.004 is a dependency alarm that should go away once controller-0 is unlocked-enabled.
Looks like an All-In-One system your trying to provision.
Therefore this could be a controller or compute function configuration error.
I would look for the words Error and Warning in the puppet logs and see what that shows.
sudo grep จCr /var/log/puppet จCe Error จCe Warning
Eric.
Hi,
Iกฏm trying to deploy a simplex on a bare metal server. After unlocking controller-0 following the installation_guide, two error events are reported and this node was degraded:
| controller-0 experienced a configuration failure. | host=controller-0 |
| No enabled compute host with connectivity to provider network. | service=networking.providernet=e542cf30-a07d-41f7-be7b-cc5a4e14b0d7 |
Would you please give me some hints how to debug this problem? Thank you!