Hi,
Thank you Don and Saul for looking into this.

Seems
http://mirror.centos.org/centos/8/BaseOS/x86_64/os/Packages/linux-firmware-20191202-97.gite8a0f4c9.el8.noarch.rpm
is the rpm to use. Rather than the linux-firmware-20190429-72.gitddde598.el7.noarch.rpm, used currently.

I will try to submit a diff, but not sure if I understood the update-pxe-network-installer script entirely.

BR
Pratik

On Tue, Aug 18, 2020 at 3:49 AM Saul Wold <sgw@linux.intel.com> wrote:
Don: Thanks!  I had a similar email queued up!

Pratik: I have added some additional information.

On 8/17/20 2:42 PM, Penney, Don wrote:
> Firmware isn’t my area, but we don’t have bnx2x-bnxZ2x-e2-7.13.11.0.fw
> in our load at all. We are currently including
> linux-firmware-20190429-72.gitddde598.el7.noarch.rpm in our system:
>
> https://opendev.org/starlingx/tools/src/commit/e390e85bd5f079d827bfabb69208cd12ec4de02e/centos-mirror-tools/config/centos/flock/rpms_centos.lst#L536
>
> The closest it has to what you’re looking for is:
>
> /usr/lib/firmware/bnx2x/bnx2x-e1-7.13.11.0.fw
>
> /usr/lib/firmware/bnx2x/bnx2x-e1h-7.13.11.0.fw
>
> /usr/lib/firmware/bnx2x/bnx2x-e2-7.13.11.0.fw
>
I think that the e2-7.13.11.0 will work.

> I see nothing with bnxZ2x.
>
> We don’t currently update the initrd or squashfs (installer rootfs) with
> the linux-firmware RPM, so we just have what’s in the stock installer
> images. The initrd only has a handful of firmware images, while the
> squashfs.img appears to have a slightly older version of the
> linux-firmware RPM content (missing the 7.13.11.0 images listed above).
>
Yeah, I was looking into this also, there is the 7.13.1.0 firmware

> If the firmware you need is in a newer version of the linux-firmware
> RPM, we’d need to update the rpms_centos.lst file to move to the newer
> version, and also update the update-pxe-network-installer utility to
> update the linux-firmware RPM content in the initrd.img and squashfs.img
> images:
>
> https://opendev.org/starlingx/root/src/branch/master/build-tools/update-pxe-network-installer
>
A quick starting point might be to try adding the newer firmware load
into the /pxeboot/rel-20.06/installer-intel-x86-64-initrd_1.0 image on
Controller-0. If I remember your trying to use this for Controller-1.

We would welcome a general change that could add specified
modules/firmware to the initrd.img based on what Don suggested above.

Sau!

> Cheers,
>
> Don.
>
> *From:* Pratik M. <pvmpublic@gmail.com>
> *Sent:* Monday, August 17, 2020 6:44 AM
> *To:* Saul Wold <sgw@linux.intel.com>
> *Cc:* starlingx-discuss@lists.starlingx.io
> *Subject:* Re: [Starlingx-discuss] bnx2x driver panic. Is source same as
> CentOS 7?
>
>
> On Fri, Aug 7, 2020 at 3:46 PM Pratik M. <pvmpublic@gmail.com
> <mailto:pvmpublic@gmail.com>> wrote:
>  >
>  > On Wed, Aug 5, 2020 at 8:56 PM Saul Wold <sgw@linux.intel.com
> <mailto:sgw@linux.intel.com>> wrote:
>  > [...]
>
>  > > Can you try installing from the master ISO to see if the 4.18 kernel
>  > > addresses these panics?
>  >
>  > Sure, I will try and update.
>
> Hi,
>
> As an update, I tried using R4.0, but that didn't work. Is it because
> the initrd does not have the necessary firmware?
>
> https://bugs.launchpad.net/starlingx/+bug/1891876
>
> Thanks
>