not sure why my emails not going through so again.... I have 6 nodes, 512Gb Memory and 24TB disk 8x3TB per node can i deploy a duplex aio on 2-3 nodes? and worker/storage on 4 nodes second to that, since we cannot confirm our network environment to meet the pxe boot on 169.254 for other controller-1, worker nodes it states here https://docs.starlingx.io/planning/kubernetes/network-planning-the-pxe-boot-... that we can create a pxe boot environment to boot all nodes... okay PXE Boot Network VERSION You can set up a PXE boot network for booting all nodes to allow a non-standard management network configuration. however, this doc states https://docs.starlingx.io/deploy_install_guides/r6_release/bare_metal/config... Configure a PXE Boot Server VERSION You can optionally set up a PXE Boot Server to support controller-0 initialization. so questions: 1) can i boot all nodes from pxe server? 2) after booting installing the controller-0 node i can then pxe boot install controller-1 node 3) in this scenerio how does controller-0 discover controller-1 so i can set the host "system host-update 2 personality=controller" 4) does the same apply to workers 5) if you have 6 fully configured server each with 24TB and 512Gb memory, how would you deploy to get a full 6 nodes with storage and compute? -- Sent with Vivaldi Mail. Download Vivaldi for free at vivaldi.com