[Starlingx-discuss] Help on shared vCPU usage
Hi I'm trying to execute scenario 206 [1] that indicates that I need to launch instance with a flavor with "hw:wrs:shared_vcpu", I created a flavor with "hw:wrs:shared_vcpu=1" but at the moment of create the instance below error is displayed.. Is there any extra config or parameter that I need to apply before creating the instance ? Error (Duplex Bare-Metal): ====== No valid host was found. There are not enough hosts available. controller-0: (NUMATopologyFilter) Shared vCPU not enabled on host cell 1, required by instance cell 0, Shared vCPU not enabled on host cell 0, required by instance cell 0, controller-1: (NUM ===== 1- https://wiki.openstack.org/wiki/StarlingX/stx.2018.10_Testplan_Instructions Regards, José
Did you provision your host with a shared cpu ? Brent -----Original Message----- From: Perez Carranza, Jose [mailto:jose.perez.carranza@intel.com] Sent: Tuesday, October 16, 2018 3:27 PM To: starlingx-discuss@lists.starlingx.io Subject: [Starlingx-discuss] Help on shared vCPU usage Hi I'm trying to execute scenario 206 [1] that indicates that I need to launch instance with a flavor with "hw:wrs:shared_vcpu", I created a flavor with "hw:wrs:shared_vcpu=1" but at the moment of create the instance below error is displayed.. Is there any extra config or parameter that I need to apply before creating the instance ? Error (Duplex Bare-Metal): ====== No valid host was found. There are not enough hosts available. controller-0: (NUMATopologyFilter) Shared vCPU not enabled on host cell 1, required by instance cell 0, Shared vCPU not enabled on host cell 0, required by instance cell 0, controller-1: (NUM ===== 1- https://wiki.openstack.org/wiki/StarlingX/stx.2018.10_Testplan_Instructions Regards, José _______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
I'm not sure about it, I just follow the procedure documented on StarlingX [1] wiki, I don’t see there any label for shared vcpu, here is what my controller and the system has configured [2], What I need to do that kind of provisioning? 1- https://wiki.openstack.org/wiki/StarlingX/Installation_Guide_Virtual_Environ... 2- http://paste.openstack.org/show/732291/ Regards, José
-----Original Message----- From: Rowsell, Brent [mailto:Brent.Rowsell@windriver.com] Sent: Tuesday, October 16, 2018 2:29 PM To: Perez Carranza, Jose <jose.perez.carranza@intel.com>; starlingx- discuss@lists.starlingx.io Subject: RE: [Starlingx-discuss] Help on shared vCPU usage
Did you provision your host with a shared cpu ?
Brent
-----Original Message----- From: Perez Carranza, Jose [mailto:jose.perez.carranza@intel.com] Sent: Tuesday, October 16, 2018 3:27 PM To: starlingx-discuss@lists.starlingx.io Subject: [Starlingx-discuss] Help on shared vCPU usage
Hi
I'm trying to execute scenario 206 [1] that indicates that I need to launch instance with a flavor with "hw:wrs:shared_vcpu", I created a flavor with "hw:wrs:shared_vcpu=1" but at the moment of create the instance below error is displayed.. Is there any extra config or parameter that I need to apply before creating the instance ?
Error (Duplex Bare-Metal): ====== No valid host was found. There are not enough hosts available. controller-0: (NUMATopologyFilter) Shared vCPU not enabled on host cell 1, required by instance cell 0, Shared vCPU not enabled on host cell 0, required by instance cell 0, controller-1: (NUM =====
1- https://wiki.openstack.org/wiki/StarlingX/stx.2018.10_Testplan_Instructions
Regards, José
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
system host-cpu-list <node> -----Original Message----- From: Perez Carranza, Jose [mailto:jose.perez.carranza@intel.com] Sent: Tuesday, October 16, 2018 3:39 PM To: Rowsell, Brent <Brent.Rowsell@windriver.com>; starlingx-discuss@lists.starlingx.io Subject: RE: [Starlingx-discuss] Help on shared vCPU usage I'm not sure about it, I just follow the procedure documented on StarlingX [1] wiki, I don’t see there any label for shared vcpu, here is what my controller and the system has configured [2], What I need to do that kind of provisioning? 1- https://wiki.openstack.org/wiki/StarlingX/Installation_Guide_Virtual_Environ... 2- http://paste.openstack.org/show/732291/ Regards, José
-----Original Message----- From: Rowsell, Brent [mailto:Brent.Rowsell@windriver.com] Sent: Tuesday, October 16, 2018 2:29 PM To: Perez Carranza, Jose <jose.perez.carranza@intel.com>; starlingx- discuss@lists.starlingx.io Subject: RE: [Starlingx-discuss] Help on shared vCPU usage
Did you provision your host with a shared cpu ?
Brent
-----Original Message----- From: Perez Carranza, Jose [mailto:jose.perez.carranza@intel.com] Sent: Tuesday, October 16, 2018 3:27 PM To: starlingx-discuss@lists.starlingx.io Subject: [Starlingx-discuss] Help on shared vCPU usage
Hi
I'm trying to execute scenario 206 [1] that indicates that I need to launch instance with a flavor with "hw:wrs:shared_vcpu", I created a flavor with "hw:wrs:shared_vcpu=1" but at the moment of create the instance below error is displayed.. Is there any extra config or parameter that I need to apply before creating the instance ?
Error (Duplex Bare-Metal): ====== No valid host was found. There are not enough hosts available. controller-0: (NUMATopologyFilter) Shared vCPU not enabled on host cell 1, required by instance cell 0, Shared vCPU not enabled on host cell 0, required by instance cell 0, controller-1: (NUM =====
1- https://wiki.openstack.org/wiki/StarlingX/stx.2018.10_Testplan_Instruc tions
Regards, José
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
Here is the list [1] So I need to use system host-cpu-modify and configure -p0 with the number of cores and assig the function as shared? 1- http://paste.openstack.org/show/732294/ Regards, José
-----Original Message----- From: Rowsell, Brent [mailto:Brent.Rowsell@windriver.com] Sent: Tuesday, October 16, 2018 3:02 PM To: Perez Carranza, Jose <jose.perez.carranza@intel.com>; starlingx- discuss@lists.starlingx.io Subject: RE: [Starlingx-discuss] Help on shared vCPU usage
system host-cpu-list <node>
-----Original Message----- From: Perez Carranza, Jose [mailto:jose.perez.carranza@intel.com] Sent: Tuesday, October 16, 2018 3:39 PM To: Rowsell, Brent <Brent.Rowsell@windriver.com>; starlingx- discuss@lists.starlingx.io Subject: RE: [Starlingx-discuss] Help on shared vCPU usage
I'm not sure about it, I just follow the procedure documented on StarlingX [1] wiki, I don’t see there any label for shared vcpu, here is what my controller and the system has configured [2], What I need to do that kind of provisioning?
1- https://wiki.openstack.org/wiki/StarlingX/Installation_Guide_Virtual_Environ ment/Duplex 2- http://paste.openstack.org/show/732291/
Regards, José
-----Original Message----- From: Rowsell, Brent [mailto:Brent.Rowsell@windriver.com] Sent: Tuesday, October 16, 2018 2:29 PM To: Perez Carranza, Jose <jose.perez.carranza@intel.com>; starlingx- discuss@lists.starlingx.io Subject: RE: [Starlingx-discuss] Help on shared vCPU usage
Did you provision your host with a shared cpu ?
Brent
-----Original Message----- From: Perez Carranza, Jose [mailto:jose.perez.carranza@intel.com] Sent: Tuesday, October 16, 2018 3:27 PM To: starlingx-discuss@lists.starlingx.io Subject: [Starlingx-discuss] Help on shared vCPU usage
Hi
I'm trying to execute scenario 206 [1] that indicates that I need to launch instance with a flavor with "hw:wrs:shared_vcpu", I created a flavor with "hw:wrs:shared_vcpu=1" but at the moment of create the instance below error is displayed.. Is there any extra config or parameter that I need to apply before creating the instance ?
Error (Duplex Bare-Metal): ====== No valid host was found. There are not enough hosts available. controller-0: (NUMATopologyFilter) Shared vCPU not enabled on host cell 1, required by instance cell 0, Shared vCPU not enabled on host cell 0, required by instance cell 0, controller-1: (NUM =====
1- https://wiki.openstack.org/wiki/StarlingX/stx.2018.10_Testplan_Instruc tions
Regards, José
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
The output show you have no shared provisioned. For this scenario, one is required. With the node locked. system host-cpu-modify -f shared -p0 1 <node> Brent -----Original Message----- From: Perez Carranza, Jose [mailto:jose.perez.carranza@intel.com] Sent: Tuesday, October 16, 2018 4:10 PM To: Rowsell, Brent <Brent.Rowsell@windriver.com>; starlingx-discuss@lists.starlingx.io Subject: RE: [Starlingx-discuss] Help on shared vCPU usage Here is the list [1] So I need to use system host-cpu-modify and configure -p0 with the number of cores and assig the function as shared? 1- http://paste.openstack.org/show/732294/ Regards, José
-----Original Message----- From: Rowsell, Brent [mailto:Brent.Rowsell@windriver.com] Sent: Tuesday, October 16, 2018 3:02 PM To: Perez Carranza, Jose <jose.perez.carranza@intel.com>; starlingx- discuss@lists.starlingx.io Subject: RE: [Starlingx-discuss] Help on shared vCPU usage
system host-cpu-list <node>
-----Original Message----- From: Perez Carranza, Jose [mailto:jose.perez.carranza@intel.com] Sent: Tuesday, October 16, 2018 3:39 PM To: Rowsell, Brent <Brent.Rowsell@windriver.com>; starlingx- discuss@lists.starlingx.io Subject: RE: [Starlingx-discuss] Help on shared vCPU usage
I'm not sure about it, I just follow the procedure documented on StarlingX [1] wiki, I don’t see there any label for shared vcpu, here is what my controller and the system has configured [2], What I need to do that kind of provisioning?
1- https://wiki.openstack.org/wiki/StarlingX/Installation_Guide_Virtual_E nviron ment/Duplex 2- http://paste.openstack.org/show/732291/
Regards, José
-----Original Message----- From: Rowsell, Brent [mailto:Brent.Rowsell@windriver.com] Sent: Tuesday, October 16, 2018 2:29 PM To: Perez Carranza, Jose <jose.perez.carranza@intel.com>; starlingx- discuss@lists.starlingx.io Subject: RE: [Starlingx-discuss] Help on shared vCPU usage
Did you provision your host with a shared cpu ?
Brent
-----Original Message----- From: Perez Carranza, Jose [mailto:jose.perez.carranza@intel.com] Sent: Tuesday, October 16, 2018 3:27 PM To: starlingx-discuss@lists.starlingx.io Subject: [Starlingx-discuss] Help on shared vCPU usage
Hi
I'm trying to execute scenario 206 [1] that indicates that I need to launch instance with a flavor with "hw:wrs:shared_vcpu", I created a flavor with "hw:wrs:shared_vcpu=1" but at the moment of create the instance below error is displayed.. Is there any extra config or parameter that I need to apply before creating the instance ?
Error (Duplex Bare-Metal): ====== No valid host was found. There are not enough hosts available. controller-0: (NUMATopologyFilter) Shared vCPU not enabled on host cell 1, required by instance cell 0, Shared vCPU not enabled on host cell 0, required by instance cell 0, controller-1: (NUM =====
1- https://wiki.openstack.org/wiki/StarlingX/stx.2018.10_Testplan_Instr uc tions
Regards, José
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
Thanks a lot... I will update my test procedure !! Regards, José
-----Original Message----- From: Rowsell, Brent [mailto:Brent.Rowsell@windriver.com] Sent: Tuesday, October 16, 2018 3:16 PM To: Perez Carranza, Jose <jose.perez.carranza@intel.com>; starlingx- discuss@lists.starlingx.io Subject: RE: [Starlingx-discuss] Help on shared vCPU usage
The output show you have no shared provisioned. For this scenario, one is required.
With the node locked.
system host-cpu-modify -f shared -p0 1 <node>
Brent
-----Original Message----- From: Perez Carranza, Jose [mailto:jose.perez.carranza@intel.com] Sent: Tuesday, October 16, 2018 4:10 PM To: Rowsell, Brent <Brent.Rowsell@windriver.com>; starlingx- discuss@lists.starlingx.io Subject: RE: [Starlingx-discuss] Help on shared vCPU usage
Here is the list [1]
So I need to use system host-cpu-modify and configure -p0 with the number of cores and assig the function as shared?
1- http://paste.openstack.org/show/732294/
Regards, José
-----Original Message----- From: Rowsell, Brent [mailto:Brent.Rowsell@windriver.com] Sent: Tuesday, October 16, 2018 3:02 PM To: Perez Carranza, Jose <jose.perez.carranza@intel.com>; starlingx- discuss@lists.starlingx.io Subject: RE: [Starlingx-discuss] Help on shared vCPU usage
system host-cpu-list <node>
-----Original Message----- From: Perez Carranza, Jose [mailto:jose.perez.carranza@intel.com] Sent: Tuesday, October 16, 2018 3:39 PM To: Rowsell, Brent <Brent.Rowsell@windriver.com>; starlingx- discuss@lists.starlingx.io Subject: RE: [Starlingx-discuss] Help on shared vCPU usage
I'm not sure about it, I just follow the procedure documented on StarlingX [1] wiki, I don’t see there any label for shared vcpu, here is what my controller and the system has configured [2], What I need to do that kind of provisioning?
1- https://wiki.openstack.org/wiki/StarlingX/Installation_Guide_Virtual_E nviron ment/Duplex 2- http://paste.openstack.org/show/732291/
Regards, José
-----Original Message----- From: Rowsell, Brent [mailto:Brent.Rowsell@windriver.com] Sent: Tuesday, October 16, 2018 2:29 PM To: Perez Carranza, Jose <jose.perez.carranza@intel.com>; starlingx- discuss@lists.starlingx.io Subject: RE: [Starlingx-discuss] Help on shared vCPU usage
Did you provision your host with a shared cpu ?
Brent
-----Original Message----- From: Perez Carranza, Jose [mailto:jose.perez.carranza@intel.com] Sent: Tuesday, October 16, 2018 3:27 PM To: starlingx-discuss@lists.starlingx.io Subject: [Starlingx-discuss] Help on shared vCPU usage
Hi
I'm trying to execute scenario 206 [1] that indicates that I need to launch instance with a flavor with "hw:wrs:shared_vcpu", I created a flavor with "hw:wrs:shared_vcpu=1" but at the moment of create the instance below error is displayed.. Is there any extra config or parameter that I need to apply before creating the instance ?
Error (Duplex Bare-Metal): ====== No valid host was found. There are not enough hosts available. controller- 0: (NUMATopologyFilter) Shared vCPU not enabled on host cell 1, required by instance cell 0, Shared vCPU not enabled on host cell 0, required by instance cell 0, controller-1: (NUM =====
1- https://wiki.openstack.org/wiki/StarlingX/stx.2018.10_Testplan_Instr uc tions
Regards, José
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
participants (2)
-
Perez Carranza, Jose
-
Rowsell, Brent