Re: [Starlingx-discuss] build-pkgs cannot complete std build >> serial builds
Erich, Given the failures you are seeing, I re-opened https://bugs.launchpad.net/starlingx/+bug/1790583 (it was still in a Fix Released state even though the original commit was reverted and a new one is currently in review) Austin, I see that you have an update pending for this: https://review.openstack.org/#/c/603983/ But according to Erich, it didn't address the build issue. Can you please investigate further? Thanks, Ghada -----Original Message----- From: Cordoba Malibran, Erich [mailto:erich.cordoba.malibran@intel.com] Sent: Wednesday, September 26, 2018 7:43 PM To: Little, Scott; starlingx-discuss@lists.starlingx.io Subject: Re: [Starlingx-discuss] build-pkgs cannot complete std build Trying to get a serial build avoiding the possible mock problems I encounter with this issue: BUILD_AVOIDANCE_URL= /localdisk/designer/jenkins-slave/starlingx/cgcs-root/build-tools/build-srpms-serial --std /localdisk/designer/jenkins-slave/starlingx/cgcs-root/build-tools/build-srpms-serial: line 33: /build-srpms-common.sh: No such file or directory CLEAN_FLAG=0 22:26:39 build-srpms-serial --std 22:26:39 make: all 22:26:40 ===== Build SRPM for 'remote-clients' ===== 22:26:40 PKG_BASE=/localdisk/designer/jenkins-slave/starlingx/cgcs-root/stx/stx-clients/remote-clients 22:26:40 WORK_BASE=/localdisk/loadbuild/jenkins-slave/starlingx/std/inputs/stx/stx-clients/remote-clients 22:26:40 RPMBUILD_BASE=/localdisk/loadbuild/jenkins-slave/starlingx/std/inputs/stx/stx-clients/remote-clients/rpmbuild 22:26:40 /localdisk/designer/jenkins-slave/starlingx/cgcs-root/build-tools/build-srpms-serial: line 941: md5sums_from_input_vars: command not found 22:26:40 ERROR: build_dir_spec (943): md5sums_from_input_vars '' '/localdisk/designer/jenkins-slave/starlingx/cgcs-root/stx/stx-clients/remote-clients/centos/remote-clients.spec' '/localdisk/loadbuild/jenkins-slave/starlingx/std/rpmbuild/SOURCES/remote-clients' Doing sed -i 's/PARALLEL/SERIAL/g' build-tools/build-srpms-serial fixes this issue. However, after the srpms are created the build-rpm-serial script is unable to find these srpms. See below ######## Wed Sep 26 22:36:34 UTC 2018: build-srpm-serial --std was successful ######## Wed Sep 26 22:36:34 UTC 2018: Launching build-rpms-serial --std /localdisk/designer/jenkins-slave/starlingx/cgcs-root/build-tools/build-rpms-serial --std FORMAL_BUILD=0 modify-build-cfg /localdisk/loadbuild/jenkins-slave/starlingx/std/jenkins-slave-starlingx-tis-r5-pike-std.cfg Nothing to build in '/localdisk/loadbuild/jenkins-slave/starlingx/std/rpmbuild/SRPMS' ######## Wed Sep 26 22:36:35 UTC 2018: build-rpm-serial --std was successful This is reported here: https://bugs.launchpad.net/starlingx/+bug/1790583 I tried this but it didn't work for me: https://review.openstack.org/#/c/603983/ So, for now seems that it's not possible to use serial building. On Wed, 2018-09-26 at 12:16 -0400, Scott Little wrote:
aclocal 'too many loops' has been popping up sporadically for a week or two now. Possibly 7.5 related.
I suspect that there is a build order and/or race condition element to this. It often goes away if you just run build-pkgs a second time.
The second possible element is that build-pkgs is using flags that preserve the mock environment between packages. The goal was to avoid reinstalling required packages that are often common across the packages we build. It was a build time speedup that has been in use for 2-3 years now without incident.
Google shows that other folks have hit 'aclocal too many loops' as well, and there are suggestions that it might be fixed in a recent update to automake. Scanning the changelog for the latest and greatest from gnu.org doesn't show any obvious fixes addressing this issue.
Scott
On 18-09-26 11:32 AM, Cordoba Malibran, Erich wrote:
BUILDSTDERR: aclocal: error: too many loops BUILDSTDERR: aclocal: Please contact <bug-automake@gnu.org>. BUILDSTDERR: at /usr/share/automake-1.13/Automake/Channels.pm line 662. BUILDSTDERR: Automake::Channels::msg('automake', '', 'too many loops') called at /usr/share/automake- 1.13/Automake/ChannelDefs.pm line 212 BUILDSTDERR: Automake::ChannelDefs::prog_error('too many loops') called at /usr/bin/aclocal line 1187 BUILDSTDERR: error: Bad exit status from /var/tmp/rpm-tmp.Sj0E7c (%build) BUILDSTDERR: Macro expanded in comment on line 214: %global _libexecdir %{_exec_prefix}/lib BUILDSTDERR: Bad exit status from /var/tmp/rpm-tmp.Sj0E7c (%build)
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
On 09/26/2018 06:50 PM, Khalil, Ghada wrote:
Erich, Given the failures you are seeing, I re-opened https://bugs.launchpad.net/starlingx/+bug/1790583 (it was still in a Fix Released state even though the original commit was reverted and a new one is currently in review)
Austin, I see that you have an update pending for this: https://review.openstack.org/#/c/603983/ But according to Erich, it didn't address the build issue. Can you please investigate further?
OK, I understand Austin's patch now and gave it my +2. I am going to try again with a scratch build now the libvirt bits have merged (or at least I think they have merged) Sau!
Thanks, Ghada
-----Original Message----- From: Cordoba Malibran, Erich [mailto:erich.cordoba.malibran@intel.com] Sent: Wednesday, September 26, 2018 7:43 PM To: Little, Scott; starlingx-discuss@lists.starlingx.io Subject: Re: [Starlingx-discuss] build-pkgs cannot complete std build
Trying to get a serial build avoiding the possible mock problems I encounter with this issue:
BUILD_AVOIDANCE_URL= /localdisk/designer/jenkins-slave/starlingx/cgcs-root/build-tools/build-srpms-serial --std /localdisk/designer/jenkins-slave/starlingx/cgcs-root/build-tools/build-srpms-serial: line 33: /build-srpms-common.sh: No such file or directory CLEAN_FLAG=0 22:26:39 build-srpms-serial --std 22:26:39 make: all 22:26:40 ===== Build SRPM for 'remote-clients' ===== 22:26:40 PKG_BASE=/localdisk/designer/jenkins-slave/starlingx/cgcs-root/stx/stx-clients/remote-clients 22:26:40 WORK_BASE=/localdisk/loadbuild/jenkins-slave/starlingx/std/inputs/stx/stx-clients/remote-clients 22:26:40 RPMBUILD_BASE=/localdisk/loadbuild/jenkins-slave/starlingx/std/inputs/stx/stx-clients/remote-clients/rpmbuild 22:26:40 /localdisk/designer/jenkins-slave/starlingx/cgcs-root/build-tools/build-srpms-serial: line 941: md5sums_from_input_vars: command not found 22:26:40 ERROR: build_dir_spec (943): md5sums_from_input_vars '' '/localdisk/designer/jenkins-slave/starlingx/cgcs-root/stx/stx-clients/remote-clients/centos/remote-clients.spec' '/localdisk/loadbuild/jenkins-slave/starlingx/std/rpmbuild/SOURCES/remote-clients'
Doing sed -i 's/PARALLEL/SERIAL/g' build-tools/build-srpms-serial fixes this issue. However, after the srpms are created the build-rpm-serial script is unable to find these srpms. See below
######## Wed Sep 26 22:36:34 UTC 2018: build-srpm-serial --std was successful
######## Wed Sep 26 22:36:34 UTC 2018: Launching build-rpms-serial --std
/localdisk/designer/jenkins-slave/starlingx/cgcs-root/build-tools/build-rpms-serial --std FORMAL_BUILD=0 modify-build-cfg /localdisk/loadbuild/jenkins-slave/starlingx/std/jenkins-slave-starlingx-tis-r5-pike-std.cfg Nothing to build in '/localdisk/loadbuild/jenkins-slave/starlingx/std/rpmbuild/SRPMS'
######## Wed Sep 26 22:36:35 UTC 2018: build-rpm-serial --std was successful
This is reported here: https://bugs.launchpad.net/starlingx/+bug/1790583 I tried this but it didn't work for me: https://review.openstack.org/#/c/603983/
So, for now seems that it's not possible to use serial building.
On Wed, 2018-09-26 at 12:16 -0400, Scott Little wrote:
aclocal 'too many loops' has been popping up sporadically for a week or two now. Possibly 7.5 related.
I suspect that there is a build order and/or race condition element to this. It often goes away if you just run build-pkgs a second time.
The second possible element is that build-pkgs is using flags that preserve the mock environment between packages. The goal was to avoid reinstalling required packages that are often common across the packages we build. It was a build time speedup that has been in use for 2-3 years now without incident.
Google shows that other folks have hit 'aclocal too many loops' as well, and there are suggestions that it might be fixed in a recent update to automake. Scanning the changelog for the latest and greatest from gnu.org doesn't show any obvious fixes addressing this issue.
Scott
On 18-09-26 11:32 AM, Cordoba Malibran, Erich wrote:
BUILDSTDERR: aclocal: error: too many loops BUILDSTDERR: aclocal: Please contact <bug-automake@gnu.org>. BUILDSTDERR: at /usr/share/automake-1.13/Automake/Channels.pm line 662. BUILDSTDERR: Automake::Channels::msg('automake', '', 'too many loops') called at /usr/share/automake- 1.13/Automake/ChannelDefs.pm line 212 BUILDSTDERR: Automake::ChannelDefs::prog_error('too many loops') called at /usr/bin/aclocal line 1187 BUILDSTDERR: error: Bad exit status from /var/tmp/rpm-tmp.Sj0E7c (%build) BUILDSTDERR: Macro expanded in comment on line 214: %global _libexecdir %{_exec_prefix}/lib BUILDSTDERR: Bad exit status from /var/tmp/rpm-tmp.Sj0E7c (%build)
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss _______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
Hi Ghada and Saul: Thanks. I'm working for fuzz patch with Shuicheng now, I will check build serial issue after "fuzz" task. BR Austin Sun. -----Original Message----- From: Saul Wold [mailto:sgw@linux.intel.com] Sent: Thursday, September 27, 2018 10:26 AM To: starlingx-discuss@lists.starlingx.io Subject: Re: [Starlingx-discuss] build-pkgs cannot complete std build >> serial builds On 09/26/2018 06:50 PM, Khalil, Ghada wrote:
Erich, Given the failures you are seeing, I re-opened https://bugs.launchpad.net/starlingx/+bug/1790583 (it was still in a Fix Released state even though the original commit was reverted and a new one is currently in review)
Austin, I see that you have an update pending for this: https://review.openstack.org/#/c/603983/ But according to Erich, it didn't address the build issue. Can you please investigate further?
OK, I understand Austin's patch now and gave it my +2. I am going to try again with a scratch build now the libvirt bits have merged (or at least I think they have merged) Sau!
Thanks, Ghada
-----Original Message----- From: Cordoba Malibran, Erich [mailto:erich.cordoba.malibran@intel.com] Sent: Wednesday, September 26, 2018 7:43 PM To: Little, Scott; starlingx-discuss@lists.starlingx.io Subject: Re: [Starlingx-discuss] build-pkgs cannot complete std build
Trying to get a serial build avoiding the possible mock problems I encounter with this issue:
BUILD_AVOIDANCE_URL= /localdisk/designer/jenkins-slave/starlingx/cgcs-root/build-tools/buil d-srpms-serial --std /localdisk/designer/jenkins-slave/starlingx/cgcs-root/build-tools/buil d-srpms-serial: line 33: /build-srpms-common.sh: No such file or directory CLEAN_FLAG=0 22:26:39 build-srpms-serial --std 22:26:39 make: all 22:26:40 ===== Build SRPM for 'remote-clients' ===== 22:26:40 PKG_BASE=/localdisk/designer/jenkins-slave/starlingx/cgcs-root/stx/stx -clients/remote-clients 22:26:40 WORK_BASE=/localdisk/loadbuild/jenkins-slave/starlingx/std/inputs/stx/ stx-clients/remote-clients 22:26:40 RPMBUILD_BASE=/localdisk/loadbuild/jenkins-slave/starlingx/std/inputs/ stx/stx-clients/remote-clients/rpmbuild 22:26:40 /localdisk/designer/jenkins-slave/starlingx/cgcs-root/build-tools/buil d-srpms-serial: line 941: md5sums_from_input_vars: command not found 22:26:40 ERROR: build_dir_spec (943): md5sums_from_input_vars '' '/localdisk/designer/jenkins-slave/starlingx/cgcs-root/stx/stx-clients/remote-clients/centos/remote-clients.spec' '/localdisk/loadbuild/jenkins-slave/starlingx/std/rpmbuild/SOURCES/remote-clients'
Doing sed -i 's/PARALLEL/SERIAL/g' build-tools/build-srpms-serial fixes this issue. However, after the srpms are created the build-rpm-serial script is unable to find these srpms. See below
######## Wed Sep 26 22:36:34 UTC 2018: build-srpm-serial --std was successful
######## Wed Sep 26 22:36:34 UTC 2018: Launching build-rpms-serial --std
/localdisk/designer/jenkins-slave/starlingx/cgcs-root/build-tools/buil d-rpms-serial --std FORMAL_BUILD=0 modify-build-cfg /localdisk/loadbuild/jenkins-slave/starlingx/std/jenkins-slave-starlin gx-tis-r5-pike-std.cfg Nothing to build in '/localdisk/loadbuild/jenkins-slave/starlingx/std/rpmbuild/SRPMS'
######## Wed Sep 26 22:36:35 UTC 2018: build-rpm-serial --std was successful
This is reported here: https://bugs.launchpad.net/starlingx/+bug/1790583 I tried this but it didn't work for me: https://review.openstack.org/#/c/603983/
So, for now seems that it's not possible to use serial building.
On Wed, 2018-09-26 at 12:16 -0400, Scott Little wrote:
aclocal 'too many loops' has been popping up sporadically for a week or two now. Possibly 7.5 related.
I suspect that there is a build order and/or race condition element to this. It often goes away if you just run build-pkgs a second time.
The second possible element is that build-pkgs is using flags that preserve the mock environment between packages. The goal was to avoid reinstalling required packages that are often common across the packages we build. It was a build time speedup that has been in use for 2-3 years now without incident.
Google shows that other folks have hit 'aclocal too many loops' as well, and there are suggestions that it might be fixed in a recent update to automake. Scanning the changelog for the latest and greatest from gnu.org doesn't show any obvious fixes addressing this issue.
Scott
On 18-09-26 11:32 AM, Cordoba Malibran, Erich wrote:
BUILDSTDERR: aclocal: error: too many loops BUILDSTDERR: aclocal: Please contact <bug-automake@gnu.org>. BUILDSTDERR: at /usr/share/automake-1.13/Automake/Channels.pm line 662. BUILDSTDERR: Automake::Channels::msg('automake', '', 'too many loops') called at /usr/share/automake- 1.13/Automake/ChannelDefs.pm line 212 BUILDSTDERR: Automake::ChannelDefs::prog_error('too many loops') called at /usr/bin/aclocal line 1187 BUILDSTDERR: error: Bad exit status from /var/tmp/rpm-tmp.Sj0E7c (%build) BUILDSTDERR: Macro expanded in comment on line 214: %global _libexecdir %{_exec_prefix}/lib BUILDSTDERR: Bad exit status from /var/tmp/rpm-tmp.Sj0E7c (%build)
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss _______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
I sent the first fix : https://review.openstack.org/#/c/605578/ This is just for the wrong variable name that was blocking the script. On 9/26/18, 10:11 PM, "Sun, Austin" <austin.sun@intel.com> wrote: Hi Ghada and Saul: Thanks. I'm working for fuzz patch with Shuicheng now, I will check build serial issue after "fuzz" task. BR Austin Sun. -----Original Message----- From: Saul Wold [mailto:sgw@linux.intel.com] Sent: Thursday, September 27, 2018 10:26 AM To: starlingx-discuss@lists.starlingx.io Subject: Re: [Starlingx-discuss] build-pkgs cannot complete std build >> serial builds On 09/26/2018 06:50 PM, Khalil, Ghada wrote: > Erich, > Given the failures you are seeing, I re-opened > https://bugs.launchpad.net/starlingx/+bug/1790583 > (it was still in a Fix Released state even though the original commit > was reverted and a new one is currently in review) > > Austin, I see that you have an update pending for this: > https://review.openstack.org/#/c/603983/ > But according to Erich, it didn't address the build issue. Can you please investigate further? > OK, I understand Austin's patch now and gave it my +2. I am going to try again with a scratch build now the libvirt bits have merged (or at least I think they have merged) Sau! > Thanks, > Ghada > > -----Original Message----- > From: Cordoba Malibran, Erich > [mailto:erich.cordoba.malibran@intel.com] > Sent: Wednesday, September 26, 2018 7:43 PM > To: Little, Scott; starlingx-discuss@lists.starlingx.io > Subject: Re: [Starlingx-discuss] build-pkgs cannot complete std build > > Trying to get a serial build avoiding the possible mock problems I encounter with this issue: > > > BUILD_AVOIDANCE_URL= > /localdisk/designer/jenkins-slave/starlingx/cgcs-root/build-tools/buil > d-srpms-serial --std > /localdisk/designer/jenkins-slave/starlingx/cgcs-root/build-tools/buil > d-srpms-serial: line 33: /build-srpms-common.sh: No such file or > directory > CLEAN_FLAG=0 > 22:26:39 build-srpms-serial --std > 22:26:39 make: all > 22:26:40 ===== Build SRPM for 'remote-clients' ===== > 22:26:40 > PKG_BASE=/localdisk/designer/jenkins-slave/starlingx/cgcs-root/stx/stx > -clients/remote-clients > 22:26:40 > WORK_BASE=/localdisk/loadbuild/jenkins-slave/starlingx/std/inputs/stx/ > stx-clients/remote-clients > 22:26:40 > RPMBUILD_BASE=/localdisk/loadbuild/jenkins-slave/starlingx/std/inputs/ > stx/stx-clients/remote-clients/rpmbuild > 22:26:40 > /localdisk/designer/jenkins-slave/starlingx/cgcs-root/build-tools/buil > d-srpms-serial: line 941: md5sums_from_input_vars: command not found > 22:26:40 ERROR: build_dir_spec (943): md5sums_from_input_vars '' '/localdisk/designer/jenkins-slave/starlingx/cgcs-root/stx/stx-clients/remote-clients/centos/remote-clients.spec' '/localdisk/loadbuild/jenkins-slave/starlingx/std/rpmbuild/SOURCES/remote-clients' > > Doing sed -i 's/PARALLEL/SERIAL/g' build-tools/build-srpms-serial > fixes this issue. However, after the srpms are created the > build-rpm-serial script is unable to find these srpms. See below > > > ######## Wed Sep 26 22:36:34 UTC 2018: build-srpm-serial --std was > successful > > ######## Wed Sep 26 22:36:34 UTC 2018: Launching build-rpms-serial > --std > > /localdisk/designer/jenkins-slave/starlingx/cgcs-root/build-tools/buil > d-rpms-serial --std > FORMAL_BUILD=0 > modify-build-cfg > /localdisk/loadbuild/jenkins-slave/starlingx/std/jenkins-slave-starlin > gx-tis-r5-pike-std.cfg Nothing to build in > '/localdisk/loadbuild/jenkins-slave/starlingx/std/rpmbuild/SRPMS' > > ######## Wed Sep 26 22:36:35 UTC 2018: build-rpm-serial --std was > successful > > This is reported here: > https://bugs.launchpad.net/starlingx/+bug/1790583 > I tried this but it didn't work for me: > https://review.openstack.org/#/c/603983/ > > So, for now seems that it's not possible to use serial building. > > > On Wed, 2018-09-26 at 12:16 -0400, Scott Little wrote: >> aclocal 'too many loops' has been popping up sporadically for a week >> or two now. Possibly 7.5 related. >> >> I suspect that there is a build order and/or race condition element >> to this. It often goes away if you just run build-pkgs a second >> time. >> >> The second possible element is that build-pkgs is using flags that >> preserve the mock environment between packages. The goal was to >> avoid reinstalling required packages that are often common across the >> packages we build. It was a build time speedup that has been in use >> for 2-3 years now without incident. >> >> Google shows that other folks have hit 'aclocal too many loops' as >> well, and there are suggestions that it might be fixed in a recent >> update to automake. Scanning the changelog for the latest and >> greatest from gnu.org doesn't show any obvious fixes addressing this >> issue. >> >> Scott >> >> >> On 18-09-26 11:32 AM, Cordoba Malibran, Erich wrote: >>> BUILDSTDERR: aclocal: error: too many loops >>> BUILDSTDERR: aclocal: Please contact <bug-automake@gnu.org>. >>> BUILDSTDERR: at /usr/share/automake-1.13/Automake/Channels.pm line >>> 662. >>> BUILDSTDERR: Automake::Channels::msg('automake', '', 'too >>> many loops') called at /usr/share/automake- >>> 1.13/Automake/ChannelDefs.pm line 212 >>> BUILDSTDERR: Automake::ChannelDefs::prog_error('too many >>> loops') called at /usr/bin/aclocal line 1187 >>> BUILDSTDERR: error: Bad exit status from /var/tmp/rpm-tmp.Sj0E7c >>> (%build) >>> BUILDSTDERR: Macro expanded in comment on line 214: %global >>> _libexecdir %{_exec_prefix}/lib >>> BUILDSTDERR: Bad exit status from /var/tmp/rpm-tmp.Sj0E7c >>> (%build) >> >> _______________________________________________ >> Starlingx-discuss mailing list >> Starlingx-discuss@lists.starlingx.io >> http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss > _______________________________________________ > Starlingx-discuss mailing list > Starlingx-discuss@lists.starlingx.io > http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss > _______________________________________________ > Starlingx-discuss mailing list > Starlingx-discuss@lists.starlingx.io > http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss > _______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss _______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
Austin, This worked for me to solve the deleted srpms, just one variable was missing. diff --git a/build-tools/build-srpms-serial b/build-tools/build-srpms-serial index fbdd33c..36cf61b 100755 --- a/build-tools/build-srpms-serial +++ b/build-tools/build-srpms-serial @@ -116,6 +116,7 @@ create_output_dirs () { # create output dirs mkdir -p $MY_BUILD_DIR + mkdir -p $BUILD_ROOT/tmp mkdir -p $MY_SRC_RPM_BUILD_DIR mkdir -p $MY_SRC_RPM_BUILD_DIR/SOURCES mkdir -p $MY_SRC_RPM_BUILD_DIR/SPECS @@ -1235,6 +1236,7 @@ done if [ $ALL -eq 1 ]; then echo echo "Auditing for obsolete srpms" + AUDIT_DIR=$(mktemp -d $MY_WORKSPACE/tmp/$USER-$ME-audit-XXXXXX) PACKAGES_CONSIDERED="" for GIT_ROOT in $GIT_LIST; do for p in $(cat $GIT_ROOT/$PKG_DIRS_FILE 2>> /dev/null); do @@ -1245,7 +1247,7 @@ if [ $ALL -eq 1 ]; then for f in $(find $src_dir/${DISTRO} -name '*.spec' | sort -V); do NAME=$(spec_find_tag Name "$f" 2>> /dev/null) if [ $? -eq 0 ]; then - PACKAGES_CONSIDERED="$PACKAGES_CONSIDERED $NAME" + touch "$AUDIT_DIR/$NAME" fi done if [ -f $src_dir/$SRPM_LIST_PATH ]; then @@ -1279,7 +1281,7 @@ if [ $ALL -eq 1 ]; then if [ -f $ORIG_SRPM_PATH ]; then NAME=$(rpm -q --queryformat '%{NAME}\n' -p $ORIG_SRPM_PATH 2>> /dev/null) if [ $? -eq 0 ]; then - PACKAGES_CONSIDERED="$PACKAGES_CONSIDERED $NAME" + touch "$AUDIT_DIR/$NAME" fi fi done I hope this can helps. -Erich On 9/26/18, 10:39 PM, "Cordoba Malibran, Erich" <erich.cordoba.malibran@intel.com> wrote: I sent the first fix : https://review.openstack.org/#/c/605578/ This is just for the wrong variable name that was blocking the script. On 9/26/18, 10:11 PM, "Sun, Austin" <austin.sun@intel.com> wrote: Hi Ghada and Saul: Thanks. I'm working for fuzz patch with Shuicheng now, I will check build serial issue after "fuzz" task. BR Austin Sun. -----Original Message----- From: Saul Wold [mailto:sgw@linux.intel.com] Sent: Thursday, September 27, 2018 10:26 AM To: starlingx-discuss@lists.starlingx.io Subject: Re: [Starlingx-discuss] build-pkgs cannot complete std build >> serial builds On 09/26/2018 06:50 PM, Khalil, Ghada wrote: > Erich, > Given the failures you are seeing, I re-opened > https://bugs.launchpad.net/starlingx/+bug/1790583 > (it was still in a Fix Released state even though the original commit > was reverted and a new one is currently in review) > > Austin, I see that you have an update pending for this: > https://review.openstack.org/#/c/603983/ > But according to Erich, it didn't address the build issue. Can you please investigate further? > OK, I understand Austin's patch now and gave it my +2. I am going to try again with a scratch build now the libvirt bits have merged (or at least I think they have merged) Sau! > Thanks, > Ghada > > -----Original Message----- > From: Cordoba Malibran, Erich > [mailto:erich.cordoba.malibran@intel.com] > Sent: Wednesday, September 26, 2018 7:43 PM > To: Little, Scott; starlingx-discuss@lists.starlingx.io > Subject: Re: [Starlingx-discuss] build-pkgs cannot complete std build > > Trying to get a serial build avoiding the possible mock problems I encounter with this issue: > > > BUILD_AVOIDANCE_URL= > /localdisk/designer/jenkins-slave/starlingx/cgcs-root/build-tools/buil > d-srpms-serial --std > /localdisk/designer/jenkins-slave/starlingx/cgcs-root/build-tools/buil > d-srpms-serial: line 33: /build-srpms-common.sh: No such file or > directory > CLEAN_FLAG=0 > 22:26:39 build-srpms-serial --std > 22:26:39 make: all > 22:26:40 ===== Build SRPM for 'remote-clients' ===== > 22:26:40 > PKG_BASE=/localdisk/designer/jenkins-slave/starlingx/cgcs-root/stx/stx > -clients/remote-clients > 22:26:40 > WORK_BASE=/localdisk/loadbuild/jenkins-slave/starlingx/std/inputs/stx/ > stx-clients/remote-clients > 22:26:40 > RPMBUILD_BASE=/localdisk/loadbuild/jenkins-slave/starlingx/std/inputs/ > stx/stx-clients/remote-clients/rpmbuild > 22:26:40 > /localdisk/designer/jenkins-slave/starlingx/cgcs-root/build-tools/buil > d-srpms-serial: line 941: md5sums_from_input_vars: command not found > 22:26:40 ERROR: build_dir_spec (943): md5sums_from_input_vars '' '/localdisk/designer/jenkins-slave/starlingx/cgcs-root/stx/stx-clients/remote-clients/centos/remote-clients.spec' '/localdisk/loadbuild/jenkins-slave/starlingx/std/rpmbuild/SOURCES/remote-clients' > > Doing sed -i 's/PARALLEL/SERIAL/g' build-tools/build-srpms-serial > fixes this issue. However, after the srpms are created the > build-rpm-serial script is unable to find these srpms. See below > > > ######## Wed Sep 26 22:36:34 UTC 2018: build-srpm-serial --std was > successful > > ######## Wed Sep 26 22:36:34 UTC 2018: Launching build-rpms-serial > --std > > /localdisk/designer/jenkins-slave/starlingx/cgcs-root/build-tools/buil > d-rpms-serial --std > FORMAL_BUILD=0 > modify-build-cfg > /localdisk/loadbuild/jenkins-slave/starlingx/std/jenkins-slave-starlin > gx-tis-r5-pike-std.cfg Nothing to build in > '/localdisk/loadbuild/jenkins-slave/starlingx/std/rpmbuild/SRPMS' > > ######## Wed Sep 26 22:36:35 UTC 2018: build-rpm-serial --std was > successful > > This is reported here: > https://bugs.launchpad.net/starlingx/+bug/1790583 > I tried this but it didn't work for me: > https://review.openstack.org/#/c/603983/ > > So, for now seems that it's not possible to use serial building. > > > On Wed, 2018-09-26 at 12:16 -0400, Scott Little wrote: >> aclocal 'too many loops' has been popping up sporadically for a week >> or two now. Possibly 7.5 related. >> >> I suspect that there is a build order and/or race condition element >> to this. It often goes away if you just run build-pkgs a second >> time. >> >> The second possible element is that build-pkgs is using flags that >> preserve the mock environment between packages. The goal was to >> avoid reinstalling required packages that are often common across the >> packages we build. It was a build time speedup that has been in use >> for 2-3 years now without incident. >> >> Google shows that other folks have hit 'aclocal too many loops' as >> well, and there are suggestions that it might be fixed in a recent >> update to automake. Scanning the changelog for the latest and >> greatest from gnu.org doesn't show any obvious fixes addressing this >> issue. >> >> Scott >> >> >> On 18-09-26 11:32 AM, Cordoba Malibran, Erich wrote: >>> BUILDSTDERR: aclocal: error: too many loops >>> BUILDSTDERR: aclocal: Please contact <bug-automake@gnu.org>. >>> BUILDSTDERR: at /usr/share/automake-1.13/Automake/Channels.pm line >>> 662. >>> BUILDSTDERR: Automake::Channels::msg('automake', '', 'too >>> many loops') called at /usr/share/automake- >>> 1.13/Automake/ChannelDefs.pm line 212 >>> BUILDSTDERR: Automake::ChannelDefs::prog_error('too many >>> loops') called at /usr/bin/aclocal line 1187 >>> BUILDSTDERR: error: Bad exit status from /var/tmp/rpm-tmp.Sj0E7c >>> (%build) >>> BUILDSTDERR: Macro expanded in comment on line 214: %global >>> _libexecdir %{_exec_prefix}/lib >>> BUILDSTDERR: Bad exit status from /var/tmp/rpm-tmp.Sj0E7c >>> (%build) >> >> _______________________________________________ >> Starlingx-discuss mailing list >> Starlingx-discuss@lists.starlingx.io >> http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss > _______________________________________________ > Starlingx-discuss mailing list > Starlingx-discuss@lists.starlingx.io > http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss > _______________________________________________ > Starlingx-discuss mailing list > Starlingx-discuss@lists.starlingx.io > http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss > _______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss _______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss _______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
Hi Erich: Sorry , which variable was missing ? are you using same patch https://review.openstack.org/#/c/603983/ ? Thanks. BR Austin Sun. -----Original Message----- From: Cordoba Malibran, Erich Sent: Thursday, September 27, 2018 12:28 PM To: Sun, Austin <austin.sun@intel.com>; Saul Wold <sgw@linux.intel.com>; starlingx-discuss@lists.starlingx.io Subject: Re: [Starlingx-discuss] build-pkgs cannot complete std build >> serial builds Austin, This worked for me to solve the deleted srpms, just one variable was missing. diff --git a/build-tools/build-srpms-serial b/build-tools/build-srpms-serial index fbdd33c..36cf61b 100755 --- a/build-tools/build-srpms-serial +++ b/build-tools/build-srpms-serial @@ -116,6 +116,7 @@ create_output_dirs () { # create output dirs mkdir -p $MY_BUILD_DIR + mkdir -p $BUILD_ROOT/tmp mkdir -p $MY_SRC_RPM_BUILD_DIR mkdir -p $MY_SRC_RPM_BUILD_DIR/SOURCES mkdir -p $MY_SRC_RPM_BUILD_DIR/SPECS @@ -1235,6 +1236,7 @@ done if [ $ALL -eq 1 ]; then echo echo "Auditing for obsolete srpms" + AUDIT_DIR=$(mktemp -d $MY_WORKSPACE/tmp/$USER-$ME-audit-XXXXXX) PACKAGES_CONSIDERED="" for GIT_ROOT in $GIT_LIST; do for p in $(cat $GIT_ROOT/$PKG_DIRS_FILE 2>> /dev/null); do @@ -1245,7 +1247,7 @@ if [ $ALL -eq 1 ]; then for f in $(find $src_dir/${DISTRO} -name '*.spec' | sort -V); do NAME=$(spec_find_tag Name "$f" 2>> /dev/null) if [ $? -eq 0 ]; then - PACKAGES_CONSIDERED="$PACKAGES_CONSIDERED $NAME" + touch "$AUDIT_DIR/$NAME" fi done if [ -f $src_dir/$SRPM_LIST_PATH ]; then @@ -1279,7 +1281,7 @@ if [ $ALL -eq 1 ]; then if [ -f $ORIG_SRPM_PATH ]; then NAME=$(rpm -q --queryformat '%{NAME}\n' -p $ORIG_SRPM_PATH 2>> /dev/null) if [ $? -eq 0 ]; then - PACKAGES_CONSIDERED="$PACKAGES_CONSIDERED $NAME" + touch "$AUDIT_DIR/$NAME" fi fi done I hope this can helps. -Erich On 9/26/18, 10:39 PM, "Cordoba Malibran, Erich" <erich.cordoba.malibran@intel.com> wrote: I sent the first fix : https://review.openstack.org/#/c/605578/ This is just for the wrong variable name that was blocking the script. On 9/26/18, 10:11 PM, "Sun, Austin" <austin.sun@intel.com> wrote: Hi Ghada and Saul: Thanks. I'm working for fuzz patch with Shuicheng now, I will check build serial issue after "fuzz" task. BR Austin Sun. -----Original Message----- From: Saul Wold [mailto:sgw@linux.intel.com] Sent: Thursday, September 27, 2018 10:26 AM To: starlingx-discuss@lists.starlingx.io Subject: Re: [Starlingx-discuss] build-pkgs cannot complete std build >> serial builds On 09/26/2018 06:50 PM, Khalil, Ghada wrote: > Erich, > Given the failures you are seeing, I re-opened > https://bugs.launchpad.net/starlingx/+bug/1790583 > (it was still in a Fix Released state even though the original commit > was reverted and a new one is currently in review) > > Austin, I see that you have an update pending for this: > https://review.openstack.org/#/c/603983/ > But according to Erich, it didn't address the build issue. Can you please investigate further? > OK, I understand Austin's patch now and gave it my +2. I am going to try again with a scratch build now the libvirt bits have merged (or at least I think they have merged) Sau! > Thanks, > Ghada > > -----Original Message----- > From: Cordoba Malibran, Erich > [mailto:erich.cordoba.malibran@intel.com] > Sent: Wednesday, September 26, 2018 7:43 PM > To: Little, Scott; starlingx-discuss@lists.starlingx.io > Subject: Re: [Starlingx-discuss] build-pkgs cannot complete std build > > Trying to get a serial build avoiding the possible mock problems I encounter with this issue: > > > BUILD_AVOIDANCE_URL= > /localdisk/designer/jenkins-slave/starlingx/cgcs-root/build-tools/buil > d-srpms-serial --std > /localdisk/designer/jenkins-slave/starlingx/cgcs-root/build-tools/buil > d-srpms-serial: line 33: /build-srpms-common.sh: No such file or > directory > CLEAN_FLAG=0 > 22:26:39 build-srpms-serial --std > 22:26:39 make: all > 22:26:40 ===== Build SRPM for 'remote-clients' ===== > 22:26:40 > PKG_BASE=/localdisk/designer/jenkins-slave/starlingx/cgcs-root/stx/stx > -clients/remote-clients > 22:26:40 > WORK_BASE=/localdisk/loadbuild/jenkins-slave/starlingx/std/inputs/stx/ > stx-clients/remote-clients > 22:26:40 > RPMBUILD_BASE=/localdisk/loadbuild/jenkins-slave/starlingx/std/inputs/ > stx/stx-clients/remote-clients/rpmbuild > 22:26:40 > /localdisk/designer/jenkins-slave/starlingx/cgcs-root/build-tools/buil > d-srpms-serial: line 941: md5sums_from_input_vars: command not found > 22:26:40 ERROR: build_dir_spec (943): md5sums_from_input_vars '' '/localdisk/designer/jenkins-slave/starlingx/cgcs-root/stx/stx-clients/remote-clients/centos/remote-clients.spec' '/localdisk/loadbuild/jenkins-slave/starlingx/std/rpmbuild/SOURCES/remote-clients' > > Doing sed -i 's/PARALLEL/SERIAL/g' build-tools/build-srpms-serial > fixes this issue. However, after the srpms are created the > build-rpm-serial script is unable to find these srpms. See below > > > ######## Wed Sep 26 22:36:34 UTC 2018: build-srpm-serial --std was > successful > > ######## Wed Sep 26 22:36:34 UTC 2018: Launching build-rpms-serial > --std > > /localdisk/designer/jenkins-slave/starlingx/cgcs-root/build-tools/buil > d-rpms-serial --std > FORMAL_BUILD=0 > modify-build-cfg > /localdisk/loadbuild/jenkins-slave/starlingx/std/jenkins-slave-starlin > gx-tis-r5-pike-std.cfg Nothing to build in > '/localdisk/loadbuild/jenkins-slave/starlingx/std/rpmbuild/SRPMS' > > ######## Wed Sep 26 22:36:35 UTC 2018: build-rpm-serial --std was > successful > > This is reported here: > https://bugs.launchpad.net/starlingx/+bug/1790583 > I tried this but it didn't work for me: > https://review.openstack.org/#/c/603983/ > > So, for now seems that it's not possible to use serial building. > > > On Wed, 2018-09-26 at 12:16 -0400, Scott Little wrote: >> aclocal 'too many loops' has been popping up sporadically for a week >> or two now. Possibly 7.5 related. >> >> I suspect that there is a build order and/or race condition element >> to this. It often goes away if you just run build-pkgs a second >> time. >> >> The second possible element is that build-pkgs is using flags that >> preserve the mock environment between packages. The goal was to >> avoid reinstalling required packages that are often common across the >> packages we build. It was a build time speedup that has been in use >> for 2-3 years now without incident. >> >> Google shows that other folks have hit 'aclocal too many loops' as >> well, and there are suggestions that it might be fixed in a recent >> update to automake. Scanning the changelog for the latest and >> greatest from gnu.org doesn't show any obvious fixes addressing this >> issue. >> >> Scott >> >> >> On 18-09-26 11:32 AM, Cordoba Malibran, Erich wrote: >>> BUILDSTDERR: aclocal: error: too many loops >>> BUILDSTDERR: aclocal: Please contact <bug-automake@gnu.org>. >>> BUILDSTDERR: at /usr/share/automake-1.13/Automake/Channels.pm line >>> 662. >>> BUILDSTDERR: Automake::Channels::msg('automake', '', 'too >>> many loops') called at /usr/share/automake- >>> 1.13/Automake/ChannelDefs.pm line 212 >>> BUILDSTDERR: Automake::ChannelDefs::prog_error('too many >>> loops') called at /usr/bin/aclocal line 1187 >>> BUILDSTDERR: error: Bad exit status from /var/tmp/rpm-tmp.Sj0E7c >>> (%build) >>> BUILDSTDERR: Macro expanded in comment on line 214: %global >>> _libexecdir %{_exec_prefix}/lib >>> BUILDSTDERR: Bad exit status from /var/tmp/rpm-tmp.Sj0E7c >>> (%build) >> >> _______________________________________________ >> Starlingx-discuss mailing list >> Starlingx-discuss@lists.starlingx.io >> http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss > _______________________________________________ > Starlingx-discuss mailing list > Starlingx-discuss@lists.starlingx.io > http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss > _______________________________________________ > Starlingx-discuss mailing list > Starlingx-discuss@lists.starlingx.io > http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss > _______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss _______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss _______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
Fix posted in ... https://review.openstack.org/605775 On 18-09-26 11:10 PM, Sun, Austin wrote:
Hi Ghada and Saul: Thanks. I'm working for fuzz patch with Shuicheng now, I will check build serial issue after "fuzz" task.
BR Austin Sun.
-----Original Message----- From: Saul Wold [mailto:sgw@linux.intel.com] Sent: Thursday, September 27, 2018 10:26 AM To: starlingx-discuss@lists.starlingx.io Subject: Re: [Starlingx-discuss] build-pkgs cannot complete std build >> serial builds
On 09/26/2018 06:50 PM, Khalil, Ghada wrote:
Erich, Given the failures you are seeing, I re-opened https://bugs.launchpad.net/starlingx/+bug/1790583 (it was still in a Fix Released state even though the original commit was reverted and a new one is currently in review)
Austin, I see that you have an update pending for this: https://review.openstack.org/#/c/603983/ But according to Erich, it didn't address the build issue. Can you please investigate further?
OK, I understand Austin's patch now and gave it my +2.
I am going to try again with a scratch build now the libvirt bits have merged (or at least I think they have merged)
Sau!
Thanks, Ghada
-----Original Message----- From: Cordoba Malibran, Erich [mailto:erich.cordoba.malibran@intel.com] Sent: Wednesday, September 26, 2018 7:43 PM To: Little, Scott; starlingx-discuss@lists.starlingx.io Subject: Re: [Starlingx-discuss] build-pkgs cannot complete std build
Trying to get a serial build avoiding the possible mock problems I encounter with this issue:
BUILD_AVOIDANCE_URL= /localdisk/designer/jenkins-slave/starlingx/cgcs-root/build-tools/buil d-srpms-serial --std /localdisk/designer/jenkins-slave/starlingx/cgcs-root/build-tools/buil d-srpms-serial: line 33: /build-srpms-common.sh: No such file or directory CLEAN_FLAG=0 22:26:39 build-srpms-serial --std 22:26:39 make: all 22:26:40 ===== Build SRPM for 'remote-clients' ===== 22:26:40 PKG_BASE=/localdisk/designer/jenkins-slave/starlingx/cgcs-root/stx/stx -clients/remote-clients 22:26:40 WORK_BASE=/localdisk/loadbuild/jenkins-slave/starlingx/std/inputs/stx/ stx-clients/remote-clients 22:26:40 RPMBUILD_BASE=/localdisk/loadbuild/jenkins-slave/starlingx/std/inputs/ stx/stx-clients/remote-clients/rpmbuild 22:26:40 /localdisk/designer/jenkins-slave/starlingx/cgcs-root/build-tools/buil d-srpms-serial: line 941: md5sums_from_input_vars: command not found 22:26:40 ERROR: build_dir_spec (943): md5sums_from_input_vars '' '/localdisk/designer/jenkins-slave/starlingx/cgcs-root/stx/stx-clients/remote-clients/centos/remote-clients.spec' '/localdisk/loadbuild/jenkins-slave/starlingx/std/rpmbuild/SOURCES/remote-clients'
Doing sed -i 's/PARALLEL/SERIAL/g' build-tools/build-srpms-serial fixes this issue. However, after the srpms are created the build-rpm-serial script is unable to find these srpms. See below
######## Wed Sep 26 22:36:34 UTC 2018: build-srpm-serial --std was successful
######## Wed Sep 26 22:36:34 UTC 2018: Launching build-rpms-serial --std
/localdisk/designer/jenkins-slave/starlingx/cgcs-root/build-tools/buil d-rpms-serial --std FORMAL_BUILD=0 modify-build-cfg /localdisk/loadbuild/jenkins-slave/starlingx/std/jenkins-slave-starlin gx-tis-r5-pike-std.cfg Nothing to build in '/localdisk/loadbuild/jenkins-slave/starlingx/std/rpmbuild/SRPMS'
######## Wed Sep 26 22:36:35 UTC 2018: build-rpm-serial --std was successful
This is reported here: https://bugs.launchpad.net/starlingx/+bug/1790583 I tried this but it didn't work for me: https://review.openstack.org/#/c/603983/
So, for now seems that it's not possible to use serial building.
On Wed, 2018-09-26 at 12:16 -0400, Scott Little wrote:
aclocal 'too many loops' has been popping up sporadically for a week or two now. Possibly 7.5 related.
I suspect that there is a build order and/or race condition element to this. It often goes away if you just run build-pkgs a second time.
The second possible element is that build-pkgs is using flags that preserve the mock environment between packages. The goal was to avoid reinstalling required packages that are often common across the packages we build. It was a build time speedup that has been in use for 2-3 years now without incident.
Google shows that other folks have hit 'aclocal too many loops' as well, and there are suggestions that it might be fixed in a recent update to automake. Scanning the changelog for the latest and greatest from gnu.org doesn't show any obvious fixes addressing this issue.
Scott
On 18-09-26 11:32 AM, Cordoba Malibran, Erich wrote:
BUILDSTDERR: aclocal: error: too many loops BUILDSTDERR: aclocal: Please contact <bug-automake@gnu.org>. BUILDSTDERR: at /usr/share/automake-1.13/Automake/Channels.pm line 662. BUILDSTDERR: Automake::Channels::msg('automake', '', 'too many loops') called at /usr/share/automake- 1.13/Automake/ChannelDefs.pm line 212 BUILDSTDERR: Automake::ChannelDefs::prog_error('too many loops') called at /usr/bin/aclocal line 1187 BUILDSTDERR: error: Bad exit status from /var/tmp/rpm-tmp.Sj0E7c (%build) BUILDSTDERR: Macro expanded in comment on line 214: %global _libexecdir %{_exec_prefix}/lib BUILDSTDERR: Bad exit status from /var/tmp/rpm-tmp.Sj0E7c (%build)
Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss _______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss _______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
Abandoned. Erich beat me to it. Scott On 18-09-27 11:16 AM, Scott Little wrote:
Fix posted in ...
https://review.openstack.org/605775
On 18-09-26 11:10 PM, Sun, Austin wrote:
Hi Ghada and Saul: Thanks. I'm working for fuzz patch with Shuicheng now, I will check build serial issue after "fuzz" task.
BR Austin Sun.
-----Original Message----- From: Saul Wold [mailto:sgw@linux.intel.com] Sent: Thursday, September 27, 2018 10:26 AM To: starlingx-discuss@lists.starlingx.io Subject: Re: [Starlingx-discuss] build-pkgs cannot complete std build
serial builds
On 09/26/2018 06:50 PM, Khalil, Ghada wrote:
Erich, Given the failures you are seeing, I re-opened https://bugs.launchpad.net/starlingx/+bug/1790583 (it was still in a Fix Released state even though the original commit was reverted and a new one is currently in review)
Austin, I see that you have an update pending for this: https://review.openstack.org/#/c/603983/ But according to Erich, it didn't address the build issue. Can you please investigate further?
OK, I understand Austin's patch now and gave it my +2.
I am going to try again with a scratch build now the libvirt bits have merged (or at least I think they have merged)
Sau!
Thanks, Ghada
-----Original Message----- From: Cordoba Malibran, Erich [mailto:erich.cordoba.malibran@intel.com] Sent: Wednesday, September 26, 2018 7:43 PM To: Little, Scott; starlingx-discuss@lists.starlingx.io Subject: Re: [Starlingx-discuss] build-pkgs cannot complete std build
Trying to get a serial build avoiding the possible mock problems I encounter with this issue:
BUILD_AVOIDANCE_URL= /localdisk/designer/jenkins-slave/starlingx/cgcs-root/build-tools/buil d-srpms-serial --std /localdisk/designer/jenkins-slave/starlingx/cgcs-root/build-tools/buil d-srpms-serial: line 33: /build-srpms-common.sh: No such file or directory CLEAN_FLAG=0 22:26:39 build-srpms-serial --std 22:26:39 make: all 22:26:40 ===== Build SRPM for 'remote-clients' ===== 22:26:40 PKG_BASE=/localdisk/designer/jenkins-slave/starlingx/cgcs-root/stx/stx -clients/remote-clients 22:26:40 WORK_BASE=/localdisk/loadbuild/jenkins-slave/starlingx/std/inputs/stx/ stx-clients/remote-clients 22:26:40 RPMBUILD_BASE=/localdisk/loadbuild/jenkins-slave/starlingx/std/inputs/ stx/stx-clients/remote-clients/rpmbuild 22:26:40 /localdisk/designer/jenkins-slave/starlingx/cgcs-root/build-tools/buil d-srpms-serial: line 941: md5sums_from_input_vars: command not found 22:26:40 ERROR: build_dir_spec (943): md5sums_from_input_vars '' '/localdisk/designer/jenkins-slave/starlingx/cgcs-root/stx/stx-clients/remote-clients/centos/remote-clients.spec' '/localdisk/loadbuild/jenkins-slave/starlingx/std/rpmbuild/SOURCES/remote-clients'
Doing sed -i 's/PARALLEL/SERIAL/g' build-tools/build-srpms-serial fixes this issue. However, after the srpms are created the build-rpm-serial script is unable to find these srpms. See below
######## Wed Sep 26 22:36:34 UTC 2018: build-srpm-serial --std was successful ######## Wed Sep 26 22:36:34 UTC 2018: Launching build-rpms-serial --std /localdisk/designer/jenkins-slave/starlingx/cgcs-root/build-tools/buil d-rpms-serial --std FORMAL_BUILD=0 modify-build-cfg /localdisk/loadbuild/jenkins-slave/starlingx/std/jenkins-slave-starlin gx-tis-r5-pike-std.cfg Nothing to build in '/localdisk/loadbuild/jenkins-slave/starlingx/std/rpmbuild/SRPMS' ######## Wed Sep 26 22:36:35 UTC 2018: build-rpm-serial --std was successful
This is reported here: https://bugs.launchpad.net/starlingx/+bug/1790583 I tried this but it didn't work for me: https://review.openstack.org/#/c/603983/
So, for now seems that it's not possible to use serial building.
On Wed, 2018-09-26 at 12:16 -0400, Scott Little wrote:
aclocal 'too many loops' has been popping up sporadically for a week or two now. Possibly 7.5 related.
I suspect that there is a build order and/or race condition element to this. It often goes away if you just run build-pkgs a second time.
The second possible element is that build-pkgs is using flags that preserve the mock environment between packages. The goal was to avoid reinstalling required packages that are often common across the packages we build. It was a build time speedup that has been in use for 2-3 years now without incident.
Google shows that other folks have hit 'aclocal too many loops' as well, and there are suggestions that it might be fixed in a recent update to automake. Scanning the changelog for the latest and greatest from gnu.org doesn't show any obvious fixes addressing this issue.
Scott
On 18-09-26 11:32 AM, Cordoba Malibran, Erich wrote:
BUILDSTDERR: aclocal: error: too many loops BUILDSTDERR: aclocal: Please contact <bug-automake@gnu.org>. BUILDSTDERR: at /usr/share/automake-1.13/Automake/Channels.pm line 662. BUILDSTDERR: Automake::Channels::msg('automake', '', 'too many loops') called at /usr/share/automake- 1.13/Automake/ChannelDefs.pm line 212 BUILDSTDERR: Automake::ChannelDefs::prog_error('too many loops') called at /usr/bin/aclocal line 1187 BUILDSTDERR: error: Bad exit status from /var/tmp/rpm-tmp.Sj0E7c (%build) BUILDSTDERR: Macro expanded in comment on line 214: %global _libexecdir %{_exec_prefix}/lib BUILDSTDERR: Bad exit status from /var/tmp/rpm-tmp.Sj0E7c (%build)
Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss _______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss _______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
participants (5)
-
Cordoba Malibran, Erich
-
Khalil, Ghada
-
Saul Wold
-
Scott Little
-
Sun, Austin