[Starlingx-discuss] StarlingX 4.0.0 Branch is tagged with 4.0.0 for Release buid
Folks, I have completed the tagging of the 4.0.0 release in the r/stx.4.0 branch. We can start the release build now. I have not tagged the docs repo pending the final commits for 4.0 there. Sau!
Please hold off, looks like there was an issue with the configuration of the layered build when we started the RC builds. There are some changes that are needed to the stx-tools repo to address this. It's likely that we will now have to rev the 4.0.0 tag to something "next". This could be 4.0.1 or 4.0.0a, as the OpenStack Infra [0] manual does not allow for deleting and re-applying a tag. Please provide your feedback as to what the "next" tag should look like, my preference is we stay numerically sequencial and use 4.0.1. We are working to resolve this and create a proper 4.0 release once the updated tags are in place. Sau! [0] https://docs.opendev.org/opendev/infra-manual/latest/drivers.html#tagging-a-... On 8/4/20 10:54 AM, Saul Wold wrote:
Folks,
I have completed the tagging of the 4.0.0 release in the r/stx.4.0 branch. We can start the release build now.
I have not tagged the docs repo pending the final commits for 4.0 there.
Sau!
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
Thank you, Saul and Team. Suggest we use 4.0.1 for the tag. brucej -----Original Message----- From: Saul Wold <sgw@linux.intel.com> Sent: Tuesday, August 4, 2020 2:43 PM To: starlingx-discuss@lists.starlingx.io Subject: Re: [Starlingx-discuss] StarlingX 4.0.0 Branch is tagged with 4.0.0 for Release buid Please hold off, looks like there was an issue with the configuration of the layered build when we started the RC builds. There are some changes that are needed to the stx-tools repo to address this. It's likely that we will now have to rev the 4.0.0 tag to something "next". This could be 4.0.1 or 4.0.0a, as the OpenStack Infra [0] manual does not allow for deleting and re-applying a tag. Please provide your feedback as to what the "next" tag should look like, my preference is we stay numerically sequencial and use 4.0.1. We are working to resolve this and create a proper 4.0 release once the updated tags are in place. Sau! [0] https://docs.opendev.org/opendev/infra-manual/latest/drivers.html#tagging-a-... On 8/4/20 10:54 AM, Saul Wold wrote:
Folks,
I have completed the tagging of the 4.0.0 release in the r/stx.4.0 branch. We can start the release build now.
I have not tagged the docs repo pending the final commits for 4.0 there.
Sau!
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
So our plan is to make the config files changes, rebuild, retest and if green lighted, the tag will be 4.0.1 ? Scott On 2020-08-04 5:53 p.m., Jones, Bruce E wrote:
Thank you, Saul and Team. Suggest we use 4.0.1 for the tag.
brucej
-----Original Message----- From: Saul Wold <sgw@linux.intel.com> Sent: Tuesday, August 4, 2020 2:43 PM To: starlingx-discuss@lists.starlingx.io Subject: Re: [Starlingx-discuss] StarlingX 4.0.0 Branch is tagged with 4.0.0 for Release buid
Please hold off, looks like there was an issue with the configuration of the layered build when we started the RC builds. There are some changes that are needed to the stx-tools repo to address this.
It's likely that we will now have to rev the 4.0.0 tag to something "next". This could be 4.0.1 or 4.0.0a, as the OpenStack Infra [0] manual does not allow for deleting and re-applying a tag.
Please provide your feedback as to what the "next" tag should look like, my preference is we stay numerically sequencial and use 4.0.1.
We are working to resolve this and create a proper 4.0 release once the updated tags are in place.
Sau!
[0] https://docs.opendev.org/opendev/infra-manual/latest/drivers.html#tagging-a-...
On 8/4/20 10:54 AM, Saul Wold wrote:
Folks,
I have completed the tagging of the 4.0.0 release in the r/stx.4.0 branch. We can start the release build now.
I have not tagged the docs repo pending the final commits for 4.0 there.
Sau!
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss _______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
On 8/4/20 3:30 PM, Scott Little wrote:
So our plan is to make the config files changes, rebuild, retest and if green lighted, the tag will be 4.0.1 ?
That sounds about right, I am still not sure what the correct config file changes are as if I understand it correctly there is a bit of a chicken/egg problem. The config file should point to release/4.0.1 but we dont have that yet, so I guess it points to rc/4.0 for the build, then gets updated to release/4.0.1 for the tag? If you make the config file changes, I will review them, as I asked in a previous thread, both the lst files and .repo files need to change, correct? Sau!
Scott
On 2020-08-04 5:53 p.m., Jones, Bruce E wrote:
Thank you, Saul and Team. Suggest we use 4.0.1 for the tag.
brucej
-----Original Message----- From: Saul Wold <sgw@linux.intel.com> Sent: Tuesday, August 4, 2020 2:43 PM To: starlingx-discuss@lists.starlingx.io Subject: Re: [Starlingx-discuss] StarlingX 4.0.0 Branch is tagged with 4.0.0 for Release buid
Please hold off, looks like there was an issue with the configuration of the layered build when we started the RC builds. There are some changes that are needed to the stx-tools repo to address this.
It's likely that we will now have to rev the 4.0.0 tag to something "next". This could be 4.0.1 or 4.0.0a, as the OpenStack Infra [0] manual does not allow for deleting and re-applying a tag.
Please provide your feedback as to what the "next" tag should look like, my preference is we stay numerically sequencial and use 4.0.1.
We are working to resolve this and create a proper 4.0 release once the updated tags are in place.
Sau!
[0] https://docs.opendev.org/opendev/infra-manual/latest/drivers.html#tagging-a-...
On 8/4/20 10:54 AM, Saul Wold wrote:
Folks,
I have completed the tagging of the 4.0.0 release in the r/stx.4.0 branch. We can start the release build now.
I have not tagged the docs repo pending the final commits for 4.0 there.
Sau!
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss _______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
Changes have merged and a rebuild of the 4.0 branch is underway on CENGN. Scott On 2020-08-04 7:10 p.m., Saul Wold wrote:
On 8/4/20 3:30 PM, Scott Little wrote:
So our plan is to make the config files changes, rebuild, retest and if green lighted, the tag will be 4.0.1 ?
That sounds about right, I am still not sure what the correct config file changes are as if I understand it correctly there is a bit of a chicken/egg problem.
The config file should point to release/4.0.1 but we dont have that yet, so I guess it points to rc/4.0 for the build, then gets updated to release/4.0.1 for the tag?
If you make the config file changes, I will review them, as I asked in a previous thread, both the lst files and .repo files need to change, correct?
Sau!
Scott
On 2020-08-04 5:53 p.m., Jones, Bruce E wrote:
Thank you, Saul and Team. Suggest we use 4.0.1 for the tag.
brucej
-----Original Message----- From: Saul Wold <sgw@linux.intel.com> Sent: Tuesday, August 4, 2020 2:43 PM To: starlingx-discuss@lists.starlingx.io Subject: Re: [Starlingx-discuss] StarlingX 4.0.0 Branch is tagged with 4.0.0 for Release buid
Please hold off, looks like there was an issue with the configuration of the layered build when we started the RC builds. There are some changes that are needed to the stx-tools repo to address this.
It's likely that we will now have to rev the 4.0.0 tag to something "next". This could be 4.0.1 or 4.0.0a, as the OpenStack Infra [0] manual does not allow for deleting and re-applying a tag.
Please provide your feedback as to what the "next" tag should look like, my preference is we stay numerically sequencial and use 4.0.1.
We are working to resolve this and create a proper 4.0 release once the updated tags are in place.
Sau!
[0] https://docs.opendev.org/opendev/infra-manual/latest/drivers.html#tagging-a-...
On 8/4/20 10:54 AM, Saul Wold wrote:
Folks,
I have completed the tagging of the 4.0.0 release in the r/stx.4.0 branch. We can start the release build now.
I have not tagged the docs repo pending the final commits for 4.0 there.
Sau!
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss _______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
On 8/4/20 7:58 PM, Scott Little wrote:
Changes have merged and a rebuild of the 4.0 branch is underway on CENGN.
Thanks for that update. Nicolae, Can you please prioritize a Sanity test if of the 4.0.1 build that Scott fired this evening. Thanks Sau!
Scott
On 2020-08-04 7:10 p.m., Saul Wold wrote:
On 8/4/20 3:30 PM, Scott Little wrote:
So our plan is to make the config files changes, rebuild, retest and if green lighted, the tag will be 4.0.1 ?
That sounds about right, I am still not sure what the correct config file changes are as if I understand it correctly there is a bit of a chicken/egg problem.
The config file should point to release/4.0.1 but we dont have that yet, so I guess it points to rc/4.0 for the build, then gets updated to release/4.0.1 for the tag?
If you make the config file changes, I will review them, as I asked in a previous thread, both the lst files and .repo files need to change, correct?
Sau!
Scott
On 2020-08-04 5:53 p.m., Jones, Bruce E wrote:
Thank you, Saul and Team. Suggest we use 4.0.1 for the tag.
brucej
-----Original Message----- From: Saul Wold <sgw@linux.intel.com> Sent: Tuesday, August 4, 2020 2:43 PM To: starlingx-discuss@lists.starlingx.io Subject: Re: [Starlingx-discuss] StarlingX 4.0.0 Branch is tagged with 4.0.0 for Release buid
Please hold off, looks like there was an issue with the configuration of the layered build when we started the RC builds. There are some changes that are needed to the stx-tools repo to address this.
It's likely that we will now have to rev the 4.0.0 tag to something "next". This could be 4.0.1 or 4.0.0a, as the OpenStack Infra [0] manual does not allow for deleting and re-applying a tag.
Please provide your feedback as to what the "next" tag should look like, my preference is we stay numerically sequencial and use 4.0.1.
We are working to resolve this and create a proper 4.0 release once the updated tags are in place.
Sau!
[0] https://docs.opendev.org/opendev/infra-manual/latest/drivers.html#tagging-a-...
On 8/4/20 10:54 AM, Saul Wold wrote:
Folks,
I have completed the tagging of the 4.0.0 release in the r/stx.4.0 branch. We can start the release build now.
I have not tagged the docs repo pending the final commits for 4.0 there.
Sau!
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss _______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
Hi Saul, Could you please indicate the location for 4.0.1 release? In the /release folder I have only 4.0.0: http://mirror.starlingx.cengn.ca/mirror/starlingx/release/4.0.0/centos/flock... Regards, Nicolae Jascanu, Ph.D. TSD Software Engineer Internet Of Things Group Galati, Romania -----Original Message----- From: Saul Wold <sgw@linux.intel.com> Sent: Wednesday, August 5, 2020 07:46 To: starlingx-discuss@lists.starlingx.io; Jascanu, Nicolae <nicolae.jascanu@intel.com> Subject: Re: [Starlingx-discuss] StarlingX 4.0.0 Branch is tagged with 4.0.0 for Release buid On 8/4/20 7:58 PM, Scott Little wrote:
Changes have merged and a rebuild of the 4.0 branch is underway on CENGN.
Thanks for that update. Nicolae, Can you please prioritize a Sanity test if of the 4.0.1 build that Scott fired this evening. Thanks Sau!
Scott
On 2020-08-04 7:10 p.m., Saul Wold wrote:
On 8/4/20 3:30 PM, Scott Little wrote:
So our plan is to make the config files changes, rebuild, retest and if green lighted, the tag will be 4.0.1 ?
That sounds about right, I am still not sure what the correct config file changes are as if I understand it correctly there is a bit of a chicken/egg problem.
The config file should point to release/4.0.1 but we dont have that yet, so I guess it points to rc/4.0 for the build, then gets updated to release/4.0.1 for the tag?
If you make the config file changes, I will review them, as I asked in a previous thread, both the lst files and .repo files need to change, correct?
Sau!
Scott
On 2020-08-04 5:53 p.m., Jones, Bruce E wrote:
Thank you, Saul and Team. Suggest we use 4.0.1 for the tag.
brucej
-----Original Message----- From: Saul Wold <sgw@linux.intel.com> Sent: Tuesday, August 4, 2020 2:43 PM To: starlingx-discuss@lists.starlingx.io Subject: Re: [Starlingx-discuss] StarlingX 4.0.0 Branch is tagged with 4.0.0 for Release buid
Please hold off, looks like there was an issue with the configuration of the layered build when we started the RC builds. There are some changes that are needed to the stx-tools repo to address this.
It's likely that we will now have to rev the 4.0.0 tag to something "next". This could be 4.0.1 or 4.0.0a, as the OpenStack Infra [0] manual does not allow for deleting and re-applying a tag.
Please provide your feedback as to what the "next" tag should look like, my preference is we stay numerically sequencial and use 4.0.1.
We are working to resolve this and create a proper 4.0 release once the updated tags are in place.
Sau!
[0] https://docs.opendev.org/opendev/infra-manual/latest/drivers.html#t agging-a-release
On 8/4/20 10:54 AM, Saul Wold wrote:
Folks,
I have completed the tagging of the 4.0.0 release in the r/stx.4.0 branch. We can start the release build now.
I have not tagged the docs repo pending the final commits for 4.0 there.
Sau!
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discu ss
Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discus s _______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discus s
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
On 8/5/20 2:16 AM, Jascanu, Nicolae wrote:
Hi Saul, Could you please indicate the location for 4.0.1 release? In the /release folder I have only 4.0.0: http://mirror.starlingx.cengn.ca/mirror/starlingx/release/4.0.0/centos/flock...
It appears I gave you the wrong location, the 4.0.1 release is still in the RC space: http://mirror.starlingx.cengn.ca/mirror/starlingx/rc/4.0/centos/flock/output... Sorry for the confusion, there was alot of locations being tossed around yesterday. Sau!
Regards, Nicolae Jascanu, Ph.D. TSD Software Engineer
Internet Of Things Group Galati, Romania
-----Original Message----- From: Saul Wold <sgw@linux.intel.com> Sent: Wednesday, August 5, 2020 07:46 To: starlingx-discuss@lists.starlingx.io; Jascanu, Nicolae <nicolae.jascanu@intel.com> Subject: Re: [Starlingx-discuss] StarlingX 4.0.0 Branch is tagged with 4.0.0 for Release buid
On 8/4/20 7:58 PM, Scott Little wrote:
Changes have merged and a rebuild of the 4.0 branch is underway on CENGN.
Thanks for that update.
Nicolae, Can you please prioritize a Sanity test if of the 4.0.1 build that Scott fired this evening.
Thanks Sau!
Scott
On 2020-08-04 7:10 p.m., Saul Wold wrote:
On 8/4/20 3:30 PM, Scott Little wrote:
So our plan is to make the config files changes, rebuild, retest and if green lighted, the tag will be 4.0.1 ?
That sounds about right, I am still not sure what the correct config file changes are as if I understand it correctly there is a bit of a chicken/egg problem.
The config file should point to release/4.0.1 but we dont have that yet, so I guess it points to rc/4.0 for the build, then gets updated to release/4.0.1 for the tag?
If you make the config file changes, I will review them, as I asked in a previous thread, both the lst files and .repo files need to change, correct?
Sau!
Scott
On 2020-08-04 5:53 p.m., Jones, Bruce E wrote:
Thank you, Saul and Team. Suggest we use 4.0.1 for the tag.
brucej
-----Original Message----- From: Saul Wold <sgw@linux.intel.com> Sent: Tuesday, August 4, 2020 2:43 PM To: starlingx-discuss@lists.starlingx.io Subject: Re: [Starlingx-discuss] StarlingX 4.0.0 Branch is tagged with 4.0.0 for Release buid
Please hold off, looks like there was an issue with the configuration of the layered build when we started the RC builds. There are some changes that are needed to the stx-tools repo to address this.
It's likely that we will now have to rev the 4.0.0 tag to something "next". This could be 4.0.1 or 4.0.0a, as the OpenStack Infra [0] manual does not allow for deleting and re-applying a tag.
Please provide your feedback as to what the "next" tag should look like, my preference is we stay numerically sequencial and use 4.0.1.
We are working to resolve this and create a proper 4.0 release once the updated tags are in place.
Sau!
[0] https://docs.opendev.org/opendev/infra-manual/latest/drivers.html#t agging-a-release
On 8/4/20 10:54 AM, Saul Wold wrote:
Folks,
I have completed the tagging of the 4.0.0 release in the r/stx.4.0 branch. We can start the release build now.
I have not tagged the docs repo pending the final commits for 4.0 there.
Sau!
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discu ss
Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discus s _______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discus s
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
participants (4)
-
Jascanu, Nicolae
-
Jones, Bruce E
-
Saul Wold
-
Scott Little